Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Westminster: What to Expect
Custom & geometric windows in Westminster typically run $6,500 – $18,000 for a whole-house package of arch-tops, trapezoids, circles and angled bays, and most jobs are measured in week one, fabricated in weeks two through six, and installed in two to three days. Lead times depend on glass and frame type: vinyl runs faster, wood-clad and aluminum slower. Call (888) 578-4462 to schedule a free on-site estimate; we’ll measure the actual openings and give you a written line-item price before anything is ordered.
How We Take a Custom & Geometric Window Job From Measure to Final Walkthrough
Shaped windows aren’t a “swap out the old one” job. The opening has to be templated, the frame has to be built to that shape, and the surrounding wall has to be rebuilt around it. Here’s the actual sequence.
Stage 1: Template and measure (day one, roughly 2 hours)
We don’t measure geometric openings with a tape. Each opening gets a physical template drawn in place, since a 1948 stucco tract home between Beach Blvd and Brookhurst St is rarely plumb or square. You decide at this stage: fixed-only or operating units, glass package (tempered, laminated, Low-E), frame material, and interior trim or drywall return.
Stage 2: Permit and order (week one into week two)
Most Westminster window changes that alter the opening or add new openings require a permit; trim replacements and like-for-like swaps often don’t. We pull what’s needed, submit the template, and place the order once the permit is approved. You sign off on the final shop drawing before fabrication starts. This is the point where changing your mind gets expensive, so we build in a review step.
Stage 3: Fabrication (typically 3 – 6 weeks)
Shaped frames and radius glass aren’t stocked. Vinyl arch-tops arrive fastest; wood-clad and aluminum fractionally longer. You’ll have the exact delivery window in writing. If the schedule slips, you hear it from us first, not the week the crew is supposed to show.
Stage 4: Removal, framing and install (2 – 3 days)
We mask the interior, pull the old units, and inspect each opening once it’s open. Rot or prior water intrusion gets flagged and quoted before we frame. Shaped openings get built out with new framing, flashed and sealed. Drywall returns and trim go up the same trip where possible.
Stage 5: Finish, inspection and walk (final day)
Stucco patching and paint touch-up, then the city inspection. We walk every unit with you, demonstrate operating hardware, hand over the manufacturer’s warranty paperwork, and close out under the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Every geometric project forces a handful of forks. Here’s the honest trade-off at each one.
- Fixed vs. operating: Most arch-tops and half-rounds are fixed. Operating units cost more and leak more at the frame over time. Choose operating only where ventilation genuinely matters.
- Vinyl vs. wood-clad vs. aluminum: Vinyl is the cheapest and lowest maintenance, but shapes and color choices are limited. Wood-clad (Andersen and Marvin are the ones we lean on) handles custom geometry and holds up well; it’s the middle and upper price tier. Aluminum suits tight-sightline modern looks but costs more and dents.
- Glass: Tempered where code requires it near doors or low to the floor; laminated for sound and security; Low-E for west- and south-facing walls. Skip Low-E on shaded north walls where the extra cost buys little.
- Trim: Interior drywall return (clean, modern, cheaper) vs. wood trim (warmer, more forgiving of slightly out-of-square openings in older Westminster homes).
What Custom & Geometric Windows Cost in Westminster, CA
Expect $6,500 – $18,000 for a typical package of shaped and angled units, with a single large custom arch or radius window often landing at $1,200 – $3,500 installed on its own. Standard replacement windows are cheaper (that’s a separate job), but the moment the opening isn’t rectangular or the frame isn’t stocked, the price steps up.
What moves the number:
- Size and shape complexity: A true radius or eyebrow arch costs more than a trapezoid because the glass has to be cut and bent.
- Existing opening condition: Rotted framing, old water damage, or a previous unpermitted opening all add demo and rebuild time.
- Relocating any structural element: Widening an opening or reworking a header requires engineering and a bigger permit scope.
- Frame and glass grade: Wood-clad and specialty glass push toward the top of the range; vinyl toward the bottom.
- Permit scope and inspection load: More openings and alteration vs. addition changes the fee and the inspection schedule.
A written estimate lists each unit, the frame and glass spec, labor, drywall and stucco patching, permit fees, and disposal. Excluded unless stated: structural repair revealed after demo, painting beyond touch-up, and any HOA architectural review fees.
See the difference
Before
After
Before
After
Before
AfterWhat Westminster Homes Specifically Do to This Job
Westminster’s housing stock is mostly post-WWII single-story stucco tract homes built between the 1950s and 1970s, sitting on small lots. On those houses, we regularly find that a past owner widened an opening without a permit, or cut a decorative arch into a wall that was never framed for it. The old stucco also hides the real condition of the framing, so we don’t quote a shaped window until the wall is opened and we can see what’s actually there. The mild coastal-inland climate is forgiving for exterior work year-round, but the summer marine layer stretches stucco and paint cure times by a day or two, so we schedule patching accordingly.
Westminster is the heart of Orange County’s Little Saigon, and we see it in the work: multi-generation households in the 92683, 92684 and 92685 ZIPs often want shaped and clerestory windows over family gathering rooms and entryways, plus new windows framed to light a converted garage or in-law suite. That’s the sort of job where a templated window won’t do, and where getting the light and sightline right matters to the way the family actually uses the room. If the project grows into a full exterior scope, it’s part of a full Windows & Doors in Westminster project, and for the approach itself, see our Windows & Doors service. We work across Westminster and the surrounding areas, and homeowners often pair this with Concrete Driveways & Concrete Work in Westminster or Asphalt Driveways & Resurfacing in Westminster when the front elevation is getting a full rework.
Serving Westminster, CA – Our Local Coverage Area
We serve Westminster and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in Westminster
Plan on 5 – 8 weeks from measure to final walkthrough: about 2 hours for templating, 1 – 2 weeks for permit and order review, 3 – 6 weeks for fabrication, and 2 – 3 days on site for install and finish. Call (888) 578-4462 for a schedule built around your specific openings.
If the opening is altered, widened, or newly created, yes; a like-for-like trim swap usually doesn’t need one. We handle permitting and inspections and won’t start demo until the permit is in hand. Call (888) 578-4462 and we’ll tell you which side your project falls on.
Usually, yes, as long as the new unit fits the existing opening and doesn’t require a new header. Enlarging or reworking a structural opening adds engineering and a bigger permit scope, and we price it separately before any work begins. Estimates are free at (888) 578-4462.
Most packages land at $6,500 – $18,000, and a single large arch or radius unit runs $1,200 – $3,500 installed. Frame material, glass, shape complexity and existing wall condition drive the spread. Call (888) 578-4462 for an exact quote.
Workmanship is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right – and the manufacturer’s warranty covers the glass and frame itself. You’ll get both in writing at the final walkthrough. Call (888) 578-4462 with any warranty question before you sign.
Get a Free Custom & Geometric Window Estimate in Westminster
Call (888) 578-4462 to schedule a free on-site estimate for custom & geometric windows in Westminster. We’ll template each opening, walk you through the frame and glass choices, and hand you a written line-item quote with no change orders and upfront pricing. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available. A live person answers every call, 24/7.
Written by the team at Groundwork Construction Co.