Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Placentia: What It Costs and How Long It Takes
A walk-in shower remodel in Placentia runs $4,500 – $12,000 for a straightforward installation and $9,000 – $28,000 when the job rolls into a full bathroom update with new plumbing, tile, and a reworked layout. Most take two to four weeks of actual construction once materials are on site, and the permit pulls add a week or two in front. Call (888) 578-4462 to set a free on-site estimate, and we’ll give you a written line-item quote before anything gets demoed.
How We Actually Build One: Day by Day, Stage by Stage
Shower remodels go bad when the schedule is vague. Here’s the real sequence we run on a Placentia walk-in shower, with what lands on your plate at each step.
Stage 1 – Site visit and written scope (day 1). We measure the alcove or footprint, check drain location and slope, and open the valve wall if it’s accessible. You decide the shower size and whether we’re keeping the existing drain location. This visit is where we confirm whether the framing behind the tile is sound, which matters a lot in Placentia’s older stucco houses.
Stage 2 – Permits and material selection (week 1 to 2). Placentia requires a permit for a shower remodel that moves plumbing, changes the valve, or alters the drain, and for anything structural. You pick tile, pan, valve trim, and glass at this stage. We price in writing – the number you see is the number you pay, no change orders mid-job. Material lead times run two to four weeks for special-order tile, so this stage sets the whole calendar.
Stage 3 – Demo and rough-in (days 1 to 3 of construction). We tear out the old pan, tile, and backer, then inspect what’s underneath. This is when old brass drains, rusted valves, and rotten subfloor show up. Rough plumbing and any electrical for lighting gets installed and inspected before anything closes back up.
Stage 4 – Waterproofing and pan build (days 3 to 5). This is the stage that decides whether the shower lasts. We build a sloped mud pan or a bonded waterproofing membrane system, then flood-test it. Skipping or rushing this step is the single most common reason shower remodels leak into the ceiling below within three years.
Stage 5 – Tile, glass, and final walkthrough (days 5 to 12). Tile setting, grout, sealing, and then templating and installing the glass enclosure. Glass templating usually adds a five to seven day gap because it’s cut to the finished opening. We do a final walkthrough with you, check the drain and valve function, and hand over the paperwork for the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Every walk-in shower is really five decisions. Here’s the honest trade-off on each.
- Acrylic or fiberglass pan vs. tiled pan: A prefab pan installs in a day and won’t leak if set right, but it looks like a prefab pan and limits you to standard sizes. A tiled pan lets you match the floor and go curbless, costs more, and depends entirely on the waterproofing being done correctly.
- Ceramic vs. porcelain vs. natural stone tile: Ceramic is the value pick and fine for walls. Porcelain holds up better to moisture and traffic and is the sweet spot for most Placentia homes. Natural stone looks the best and needs sealing every year or two – worth it if you’ll keep up with it.
- Framed vs. frameless glass: Framed glass is cheaper and more forgiving of an out-of-square opening, which older houses often have. Frameless looks cleaner but has to be templated to exact dimensions, so it costs more and can’t hide a crooked wall.
- Standard valve vs. thermostatic valve: A standard pressure-balance valve is what most homes have and it works. A thermostatic valve lets you set an exact temperature and is worth the upgrade if you have kids or anyone who’s sensitive to temperature swings.
- Curb vs. curbless entry: Curbless is the true walk-in shower and the better choice for aging in place, but it requires the floor to be recessed or the whole pan built up, which means more framing and more cost.
On fixtures, Kohler is our go-to for valves and trim because replacement parts stay available for years – which matters when a cartridge fails in year ten.
What Walk-In Showers & Shower Remodeling Costs in Placentia, CA
Expect $9,000 – $28,000 for a walk-in shower remodel in Placentia, with the typical job landing in the $12,000 – $18,000 band. A straight shower replacement in the same footprint runs $3,000 – $8,500, and a tub-to-shower conversion runs $3,500 – $10,000. Five things push the number up or down:
- Size and configuration: A 36×48 alcove is the low end. A 5-foot curbless walk-in with a bench and niche adds several thousand in framing, waterproofing, and tile.
- Existing condition behind the wall: Original plumbing, a rusted drain, or a soft subfloor in a mid-century Placentia house can add $1,500 – $4,000 once the wall opens.
- Moving plumbing or structure: Relocating the drain or valve means cutting and re-piping, plus new permit scope. Keeping them in place is the single biggest cost saver.
- Material grade: Ceramic and a prefab pan sit at the bottom. Porcelain, a tiled pan, and frameless glass sit at the top.
- Permit scope: A plumbing or structural permit adds cost and inspection time. A pure cosmetic swap less.
Your written estimate covers demo, rough plumbing and electrical, waterproofing, tile and setting materials, the pan or receptor, valve and trim, glass, and cleanup. It typically does not cover structural repair found after demo, upgraded tile beyond the selected allowance, or a new exhaust fan if the existing one fails inspection.
See the difference
Before
After
Before
After
Before
AfterWhat Placentia Homes Specifically Do to This Job
Placentia is fully built out, so nearly every shower we work on is a renovation inside an existing house – and the housing stock is where the surprises live. In the older neighborhoods near the historic downtown and along the old Pacific Electric right-of-way, a lot of homes started as worker housing for the citrus packing houses, then got expanded lot by lot over the decades. Many sit on shallow pier-and-beam foundations or slab-on-grade with no moisture barrier, so when we open the shower wall we regularly find termite damage, settling, and 1950s-era plumbing that has to be upgraded before the new pan goes in. We budget for hidden structural repair on nearly every mid-century house in 92870 and 92871, and we’d rather tell you that upfront than surprise you at demo. That’s also why permits here are rarely rubber-stamped for older work – the city has little vacant land left to develop, so inspections focus hard on the renovation details. If the shower job is part of a larger project, it often rides along with a full Bathroom Remodeling in Placentia scope, and homeowners in this city often pair exterior upgrades with interior work – Roof Replacement & Installation in Placentia and Metal Roofing in Placentia come up when the same moisture that ruins a shower pan has been quietly working on the roof. We cover all of Placentia, and you can see the broader Bathroom Remodeling service for the full scope.
Serving Placentia, CA – Our Local Coverage Area
We serve Placentia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Placentia
A walk-in shower remodel in Placentia usually takes two to four weeks of construction once materials arrive, plus one to two weeks for the permit. Special-order tile and templated glass add lead time, so the calendar often runs five to seven weeks from contract to final walkthrough. Call (888) 578-4462 for a schedule based on your actual selections – the estimate is free.
Yes, if the work moves plumbing, changes the valve or drain, or touches framing or electrical. Placentia’s building department inspects rough plumbing and waterproofing before tile goes on, and our written scope lists exactly what’s permitted. A pure cosmetic tile swap may not need one, and we’ll tell you which category your job falls into. Call (888) 578-4462 to talk through your specific scope.
Yes – keeping the existing drain and valve location is the most common way to control cost, and it saves $1,500 – $4,000 on a typical job. We can still upgrade the valve, rebuild a curbless pan, and change tile and glass while leaving the plumbing in place. Call (888) 578-4462 and we’ll confirm what’s possible in your footprint.
Walk-In Showers & Shower Remodeling in Placentia costs $9,000 – $28,000, with most jobs in the $12,000 – $18,000 range; a simple replacement in the same footprint runs $3,000 – $8,500. The high end covers a curbless tiled pan, porcelain tile, frameless glass, and hidden plumbing repair. Call (888) 578-4462 for an exact quote – estimates are free and line-itemized.
Every walk-in shower we build is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers the waterproofing, tile, pan, valve, and glass installation for two full years, one of the longest workmanship guarantees in residential construction. Call (888) 578-4462 with any warranty question before or after the job.
Get a Free Walk-In Shower Estimate in Placentia
Call (888) 578-4462 for a free on-site estimate on Walk-In Showers & Shower Remodeling in Placentia. A live person answers around the clock, not a voicemail. We measure, check what’s behind the wall, and hand you a written line-item quote with a fixed price – no surprises when the tile comes off. Thinking wider? Ask about $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of Irvine.