Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Placentia: What It Costs and How Long It Takes
Metal roofing in Placentia runs $15,000 – $40,000 installed, and most homes are finished in 5 to 10 working days once materials land on site. A tear-off and re-roof on a typical 1,400 – 1,800 sq ft Placentia house usually falls in the $16,000 – $24,000 range. The number moves with roof pitch, panel type, and how much of the old assembly has to come off. Call (888) 578-4462 for a free on-site estimate with a written line-item quote.
How a Metal Roof Goes On: The Stage-by-Stage Sequence
We don’t hand you a start date and disappear. Here’s the actual order of work, what happens each day, and where you make decisions.
Stage 1: Inspection and scope (day 1)
We walk the roof, check decking, flashing, and vent penetrations, and photograph anything questionable. On a mid-century Placentia house with pier-and-beam or slab framing, we also check how the fascia and sheathing are attached, since 1950s-era fastening often doesn’t meet current uplift requirements. You get a written scope before we order anything.
Stage 2: Permit and material order (days 2 – 4)
We pull the roofing permit through the city and order panels once colors are locked. Standing seam is formed to length; that lead time is the one thing that can push a start date, so we confirm it up front. You pick color and panel profile at this stage, not later.
Stage 3: Tear-off and deck repair (days 1 – 3 on site)
Old roofing comes off down to the deck. Any rot, soft spots, or water damage gets found here, and we photograph and price it before covering it up. On homes built between the 1920s and 1960s in Placentia, that deck repair is the most common surprise line item.
Stage 4: Underlayment and panel install (days 3 – 8)
We install high-temp underlayment, then the panels, working in sections so the roof stays weather-tight overnight. Ridge, hip, and valley flashing all go in the same phase. Panels are fastened to manufacturer spec so the wind rating holds for your inspection.
Stage 5: Inspection and final walkthrough (last 1 – 2 days)
The city inspects the flashing and attachment. We do a final walk with you, check gutters and downspouts, and hand over the manufacturer warranty paperwork along with our own 730-Day Done Right Promise. Most Placentia jobs wrap in that 5 to 10 day window.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roof Options You’ll Actually Choose Between
There’s no single “metal roof” product. Here’s what real buyers weigh, and what each choice costs you in money and longevity.
- Standing seam (the premium pick): Concealed fasteners, clean vertical lines, 40 to 50 year lifespan. Highest cost, best for low-slope sections and homes where you want a modern look.
- Exposed-fastener panels: Lower cost, quicker to install. Fasteners need occasional checking over the years, so it suits budget-minded jobs and outbuildings.
- Stone-coated steel: Mimics tile or shingle, which matters on Placentia streets where the neighborhood reads traditional. Heavier, and the look sells the resale.
- Color and finish: A factory finish on a quality panel (we work with GAF and CertainTeed systems) holds color far longer than a field-painted panel.
You’ll also decide panel profile, whether to add a radiant barrier for summer heat, and whether to replace gutters while the roof is open. Each of those is priced before work starts, never after.
What Metal Roofing Costs in Placentia, CA
Plan for $15,000 – $40,000 for a full metal roof install here. The low end is a simple gable roof with exposed-fastener panels; the high end is complex geometry with standing seam.
- Roof size and pitch: A steep or cut-up roof takes longer and uses more flashing and waste.
- Deck condition: Rot or soft sheathing adds repair cost before panels go down.
- Panel type: Standing seam sits well above exposed-fastener pricing.
- Permit and inspection scope: Added ventilating or structural fixes widen the permit.
A written estimate from us lists tear-off, underlayment, panels, flashing, permit, and cleanup as separate lines, with the number you see being the number you pay. What’s typically not included: unforeseen structural repair found after tear-off (we price it with photos before proceeding) and gutter replacement unless you ask for it.
See the difference
Before
After
Before
After
Before
AfterWhat Placentia Homes Specifically Do to This Job
Placentia is a small, fully built-out city in North Orange County. Almost all the roofing work here is replacement on existing homes, not new construction, and a good share of it involves houses originally built as worker housing for the old citrus packing houses, later expanded lot by lot. In the older blocks near the historic downtown and along the old Pacific Electric right-of-way, we regularly find 1920s – 1950s framing and shallow pier-and-beam or slab decks with no moisture barrier, so a metal re-roof often turns into deck repair once the old layers come off. The hot, dry summers and Santa Ana winds make the fire resistance and wind rating of metal a real selling point here, while occasional heavy winter rain exposes flashings on older flat sections. Permitting runs through the city, and with so little vacant land left, inspectors are strict on flashing detail and attachment. Homeowners across Placentia rely on us for this work, and we cover the surrounding 92870 and 92871 ZIPs.
Serving Placentia, CA – Our Local Coverage Area
We serve Placentia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Placentia
Most metal roofing in Placentia takes 5 to 10 working days on site once materials arrive, with small simple roofs finishing faster. Panel fabrication lead time before that can add a week or two depending on color and profile. Call (888) 578-4462 and we’ll give you a real timeline for your house.
Yes, a re-roof here needs a permit and a final inspection. We pull it for you and handle the inspection, which checks flashing and fastener attachment. Call (888) 578-4462 for a free estimate that includes permit scope.
Expect $15,000 – $40,000 for a full install on a typical Placentia home. Simple exposed-fastener roofs land near the low end; standing seam and complex roof lines push toward the top. Call (888) 578-4462 for an exact quote, estimates are free.
Sometimes, but we usually recommend a full tear-off so we can inspect and repair the deck underneath. On older Placentia homes that hidden deck repair is exactly what you want to catch. Call (888) 578-4462 and we’ll tell you which route fits your roof.
The panels carry a manufacturer finish and material warranty, and every job is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If it’s not done right, we make it right. Call (888) 578-4462 to get your estimate on the books.
Get a Free Metal Roofing Estimate in Placentia
Call (888) 578-4462 and a live person answers, day or night. We’ll set up a free on-site estimate, walk your roof, and hand you a written line-item quote for your metal roofing in Placentia with no surprises. This is often part of a full Roofing in Placentia scope, and some homeowners pair it with Window Replacement in Placentia to tighten the whole envelope at once. You can see our full Roofing service for the wider picture, and if security and heat are on your mind, Impact Windows & Doors in Placentia pair well with a new roof.
Written by the team at Groundwork Construction Co.