Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Stanton, CA: What It Costs and How Long It Takes
A tub-to-shower conversion in Stanton typically runs $3,500 to $10,000 and takes 5 to 10 working days once demolition starts, with the bulk of jobs landing near the middle of that range. The work means pulling the old tub and its surround, reworking the drain and valve wall, waterproofing, tiling or paneling the new shower, and resetting fixtures. Call (888) 578-4462 for a free on-site estimate.
How a Tub-to-Shower Conversion Actually Goes, Day by Day
This is the part most bids skip. Here’s the real sequence we follow from first walkthrough to final walkthrough, and where you’ll be asked to make decisions.
- Day 1 – Demo and tear-out. We protect the floors and hall, shut the water, and remove the tub, surround, and any drywall behind it. We open the drain and valve wall so we can see what’s actually there. You decide nothing on this day; we’re finding surprises. Old tubs set into the pan on a mortar bed, cracked lead drain arms, or a previous owner’s tile-over-tile job are all things that surface here.
- Day 2 – Rough-in and shutoff. The drain gets moved or reversed to fit a shower pan, the valve gets swapped to a pressure-balanced or thermostatic unit, and any needed backing gets added. You’ll pick the valve trim, the drain (linear vs. center-point), and confirm the pan footprint. A rough plumbing inspection is scheduled if your scope requires one, which in Stanton usually means a call to the city and a same-week or next-week slot.
- Day 3 – Waterproofing. This is the stage that separates a 15-year shower from a 3-year one. We install a bonded waterproofing membrane (sheet or liquid, matching the substrate) and pre-slope the floor if a curb-and-mortar pan is being built. You’ll want to see this happen, and we’re happy to photograph it for your records.
- Days 4 to 6 – Tile or panel, grout, and setting. Large-format porcelain, a stone-look slab, or a prefab acrylic panel system all land here. Relocating or adding a niche, bench, or grab bar goes in before tile. Choose grout color and caulk a couple days before this stage, not on the morning of.
- Days 7 to 10 – Fixtures, glass, and punch list. Showerhead, valve trim, grab bars, glass panel or curtain rod, sealing, and a full water test. You walk the job with us before we load out. If anything doesn’t drain right, we come back and fix it under the 730-Day Done Right Promise.
The whole thing runs faster if the existing plumbing and framing cooperate. Any rough-in surprise, or a wall that has to be rebuilt to hold the shower pan, adds days. Most of those unknowns show themselves on day 1.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’ll Choose Between for a Tub-to-Shower Conversion
Four decisions drive the look, the price, and how the shower ages:
- Base system – molded pan vs. curb-and-mortar tile. A molded acrylic or composite pan runs $400 to $1,200 and drops in fast. A custom-tiled mud pan looks seamless, costs $800 to $2,000 more in labor alone, and lasts decades if it’s pre-sloped correctly. If you’re 55 or better, we nudge toward the molded pan with a low curb and a bench; it’s easier to clean and easier to step into.
- Walls – tile vs. panel. Porcelain tile in large format (12×24 or bigger) is the most durable choice and handles a Grohe valve or body sprays without looking stitched-together. Acrylic or solid-surface panels cost less and clean up faster but read as builder-grade. Tile adds a few days and a few thousand dollars.
- Drain – center vs. linear. A center drain is the default and works well on a flat pan. A linear drain lets you use larger tile at one slope and looks cleaner, but costs $400 to $900 more installed and needs a pan built for it.
- Enclosure – curtain rod vs. framed vs. frameless glass. A rod is the cheap option. Framed glass runs $600 to $1,400. Frameless glass is the showpiece at $1,200 to $2,800 but needs solid framing behind it. We’ve done many of these in Stanton; the correct answer usually comes down to how much wall is available.
Fixtures swing the number too. A basic pressure-balanced valve and showerhead pair runs $250 to $500 installed. A thermostatic valve with a rain head and hand spray climbs to $900 to $1,800. We carry brands we trust making parts for a dozen years, not just parts that happen to be on the shelf today.
What Tub-to-Shower Conversion Costs in Stanton, CA
The honest number for most Stanton conversions is $3,500 to $10,000, installed, permitted as required, and finished. Below $3,500 you’re usually looking at a molded pan and panel shell over the existing plumbing – quick, clean, and fine. Above $7,000 you’re into tile, glass, and a valve upgrade.
Five things push the job toward the high end:
- Footprint. A 30×60 alcove keeps the drain roughly where it was. A widened or walk-in footprint means moving the drain, which adds $400 to $900.
- Condition behind the wall. Water damage, a cracked pan flange, or mold behind the original surround has to be dried, replaced, and re-waterproofed. That’s $500 to $1,500 depending on the spread.
- Plumbing and electrical moves. Reversing a drain is simple; moving the valve wall is not. Adding a light, exhaust fan, or heated floor adds electrical work and inspection time.
- Material grade. Panel shell versus porcelain tile versus stone slab is the single biggest gap between a $4,000 job and a $10,000 job.
- Permit scope. A like-for-like swap may not need a permit in Stanton; changing the plumbing layout or adding a drain almost always will. We pull it, schedule the inspection, and get it signed off – it’s part of the written estimate, not an upcharge after the fact.
Our written line-item quote tells you exactly what’s included and what isn’t. No change orders without a conversation, nothing hidden. We also knock $1,000 off any tub-to-shower conversion over $10,000 when it’s paired with a broader project, and we offer 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat Stanton Homes Specifically Do to a Tub-to-Shower Conversion
Most of the tubs we pull in Stanton come out of 1950s and ’60s single-story stucco tract homes on narrow postwar lots – the kind of stock that’s been touched three times since it was built and shows its age the moment you open a wall. Copper supply lines have often been patched with PEX by a previous plumber. The original galvanized drain arm has usually been swapped, but not always. And in a city this built-out, where so much work is tear-down, scrape-and-rebuild, or ADU infill, we’ve learned that a tub-to-shower conversion is rarely a clean swap on a 60-year-old house – it’s a four- or five-day reset.
The permitting reality matters too. Stanton is a 3.1-square-mile city shaped by redevelopment along Beach Blvd and Katella Ave, and the building department is used to remodels and tenant improvements, not new subdivisions. A shower-only conversion in a single-family home on a straight swap usually doesn’t require a permit. Moving the drain or valve wall does. We pull it, we schedule it, we get the inspection signed off. Our Bathroom Remodeling in Stanton team handles the wider scope when the conversion is part of a full room redo.
One thing that doesn’t come up much in the trade press but shows up on job sites here: narrow lots mean inspections sometimes need a gate that doesn’t block a neighbor’s driveway, and some of the older multifamily buildings along Beach have shared plumbing walls the city will ask you to look at before work starts. It’s the kind of local reality that costs days if you don’t plan for it.
If you’re already planning a new roof or exterior work, homeowners often pair a conversion with Metal Roofing in Stanton or a smaller repair handled through Tile Roofing in Stanton. We cover the whole Stanton service area and can quote the whole scope in one visit, which is where the real savings usually sit.
Serving Stanton, CA – Our Local Coverage Area
We serve Stanton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Stanton
Most jobs run 5 to 10 working days from demolition to final walkthrough. A simple panel-shell swap is closer to 5. A full tile conversion with a new pan, glass, and valve trim is closer to 10, plus inspection scheduling time. Call (888) 578-4462 and we’ll give you a specific timeline for your bath once we’ve seen it – estimates are free.
A like-for-like swap that keeps the drain and valve wall in place usually doesn’t need one; anything that moves plumbing or adds a drain almost always does. We handle pulling the permit and pass the inspection as part of the job, and it’s in the written estimate before work starts. Call (888) 578-4462 to walk through your specific scope.
Yes, in most cases. If the drain stays in roughly the same spot and the valve wall doesn’t shift, we can keep the plumbing and framing in place and still deliver a full tile or panel shower. That’s the cleanest path to a lower price and a shorter schedule. Call (888) 578-4462 and we’ll tell you what your existing rough-in will support.
Expect $3,500 to $10,000, installed. The low end covers a molded pan, panel walls, and a like-for-like valve swap. The high end is porcelain tile, frameless glass, and a linear drain. Call (888) 578-4462 for an exact number on your bath – the estimate is free and we’ll put it in writing.
Every conversion falls under our 730-Day Done Right Promise – one of the longest workmanship guarantees in the residential construction space. If a pan leaks, a tile cracks from a bad set, or a valve fails because of our installation, we come back and make it right. Call (888) 578-4462 to schedule your estimate and see the written terms.
Ready for a Real Number on Your Stanton Tub-to-Shower Conversion?
Call (888) 578-4462 to schedule a free on-site estimate for your tub-to-shower conversion in Stanton. We’ll walk the bath, measure the existing rough-in, and hand you a written line-item quote with the permit scope and the timeline spelled out. No pressure, no vague “pricing varies.” If you’d like to see the wider scope, our Bathroom Remodeling service page covers the broader project.
Written by the team at Groundwork Construction Co.