Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Stanton, CA: What the Job Really Involves
Vanities, tile & fixtures in Stanton typically run $9,000 – $28,000 for a full bathroom surface and fixture package, and most of that work is done in three to six working days once materials are on site. You’re choosing a vanity, floor and wall tile, and the faucet, shower and lighting fixtures that tie the room together, then we handle tear-out, prep, waterproofing, setting and finish. Call (888) 578-4462 for a free on-site estimate before you buy a single tile.
How We Sequence a Vanity, Tile and Fixture Job
Every project moves through the same five stages, and knowing what happens when helps you make decisions at the right moment instead of holding up the crew.
Stage 1: Measure and Plan (Day 1, half day)
We measure the room to the sixteenth of an inch, check that the floor is level and the walls are plumb, and photograph the existing plumbing and electrical rough-in. This is when you lock the vanity size, the tile layout and where the fixtures land. On Stanton’s compact 1950s and 60s baths, a 30-inch vanity often fits where a 36-inch one looks right on paper. We find that out before you order.
Stage 2: Demo and Prep (Day 2, full day)
We pull the old vanity, toilet, tile and any failing backer board. Then we inspect the subfloor and wall framing for water damage, which is common around old shower valves and vanity drains. You decide at this point whether to replace a section of subfloor or add a fresh cement backer board. Prep is where a lasting tile job is won or lost.
Stage 3: Rough-In and Waterproofing (Day 3, full day)
Plumbing and electrical adjustments happen here: moving a vanity drain, adding a GFCI outlet, setting the new valve. Then we apply waterproofing membrane to the shower and wet walls. This stage is the one most homeowners underestimate, and it’s the last one we rush. When the layout is part of a bigger project, this is where we hand off to Bathroom Remodeling in Stanton for the surrounding scope.
Stage 4: Tile and Setting (Days 4 – 5, one to two days)
Floor tile goes down first, then wall tile, then the shower. Large-format porcelain sets faster than small mosaic because there are fewer grout lines. Grout and sealant go in last, and we leave the room to cure before fixtures go back in. You’ll pick grout color at the estimate, not the morning of the job.
Stage 5: Fixtures and Final Walkthrough (Day 6, half day)
Vanity, sink, faucet, toilet, shower head, trim and lighting all go in. Then we run every fixture, check for leaks and verify the tile and caulk meet at clean lines. We walk the room with you and leave a written punch list. That’s also the point we explain what the 730-Day Done Right Promise covers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Vanities, Tile and Fixtures
Material choice moves the price more than labor does. Here’s the honest trade-off on the decisions that matter most.
- Vanity type. A stock 30-inch to 48-inch cabinet is the least expensive route and fits most Stanton baths. A semi-custom vanity gives you the right depth and drawer layout for about 20 – 40% more. Custom millwork is worth it when the room is odd-shaped and no standard size will look right.
- Vanity top. Cultured marble is the value option and holds up well. Quartz is more scratch and stain resistant and is what most buyers choose. Natural stone is beautiful but needs sealing and is unforgiving of acidic cleaners.
- Floor tile. Porcelain is the default for wet rooms: durable, low maintenance, and available in wood-look. Ceramic costs less but chips more easily. Natural stone needs sealing every year or two.
- Shower wall tile. Large-format porcelain is easy to clean. Small mosaic gives more grip underfoot. Glass tile looks best but demands a skilled setter to keep the pattern tight.
- Fixtures. Chrome is the least expensive and most durable finish. Brushed nickel and matte black hold up similarly. A quality faucet from a brand like Grohe costs more upfront but outlasts a builder-grade valve. You’ll feel the difference in the cartridge, not the handle.
What Vanities, Tile & Fixtures Costs in Stanton, CA
Expect $9,000 – $28,000 for a full vanity, tile and fixture package in Stanton, with the low end covering a straightforward 5×8 bath and the high end covering a larger room with premium tile, a semi-custom vanity and upgraded fixtures. Here’s what moves the number:
- Room size and layout. A second bathroom or a large primary suite adds tile square footage and setting time.
- Existing condition. Water damage, rotten subfloor or old galvanized plumbing can add $1,500 – $4,000 in prep.
- Relocating plumbing or electrical. Moving a drain or adding a circuit requires rough-in work and a permit revision.
- Material grade. The gap between builder-grade porcelain and imported large-format tile is often $2,000 – $5,000 on a single bathroom.
- Permit scope. Cosmetic tile and fixture swaps may not need a permit; moving plumbing or electrical does.
Your written estimate lists tile, grout, setting materials, fixtures, labor and permit costs line by line. Things that typically sit outside the quote: hidden water damage found during demo, structural framing repairs, and the cost of the tile itself if you’re buying it separately. Upfront pricing is the rule here – the number you see is the number you pay, barring what we find behind the wall.
See the difference
Before
After
Before
After
Before
AfterWhat Stanton Homes Specifically Do to This Job
Stanton is one of the densest, most redevelopment-churned small cities in Orange County, and that shows up in the bathrooms. Almost every project we touch here is a tear-out inside a 1950s or 60s single-story stucco tract home on a compact lot, or a refresh inside a low-rise apartment building along Beach Blvd or Katella Ave. That means older drain lines, undersized wall cavities and tile set over materials that have been wet for decades.
Permitting matters too. Because so much of Stanton’s housing stock has been added to, converted or scraped and rebuilt over the years, the city’s permitting culture is used to tight-lot, infill work, and we verify what’s actually on record before we demo. If your vanity or shower relocation touches plumbing or electrical, we pull the permit and pass the inspection. On the rare occasion a project spills into exterior work, homeowners often pair this with Tile Roofing in Stanton while the scaffolding is already up. Our Specialty Roofing in Stanton team also handles the Santa Ana wind damage that dry inland Orange County summers bring.
Serving Stanton, CA – Our Local Coverage Area
We serve Stanton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Vanities, Tile & Fixtures in Stanton
Most vanities, tile & fixtures projects in Stanton take three to six working days on site once materials arrive, with a typical 5×8 bathroom landing near four days. Add one to two weeks before that for tile and fixture lead times. Call (888) 578-4462 to schedule a free estimate and confirm your timeline.
Cosmetic upgrades like new tile, a replacement vanity or a fixture swap usually don’t require a permit, but moving plumbing, adding electrical or changing a shower valve does. We pull the permit and handle the inspection when the scope calls for it. Call (888) 578-4462 to find out what your project needs.
Yes. Most of our Stanton vanities, tile & fixtures jobs keep the plumbing and framing in place and replace surfaces and fixtures in the same locations. That keeps the price lower and the timeline short. Call (888) 578-4462 and we’ll tell you whether your layout allows it.
A full vanity, tile and fixture package in Stanton comes in at $9,000 – $28,000, with a vanity install on its own running $800 – $3,000. Tile grade, room size and any plumbing relocation push the number to the high end. Call (888) 578-4462 for an exact written quote – estimates are free.
Every vanities, tile & fixtures project is backed by our 730-Day Done Right Promise, and if it’s not done right, we make it right. All work is covered by that workmanship guarantee. Call (888) 578-4462 to go over the details on your project.
Get a Free Estimate on Vanities, Tile & Fixtures in Stanton
If you’re ready to plan a bathroom refresh, we’ll walk the room with you, measure, and hand you a written line-item estimate at no charge. Our technicians have up to 12 years of experience, and every project is background-checked and covered by the 730-Day Done Right Promise. Call (888) 578-4462 – a live person answers around the clock. Our Bathroom Remodeling team serves Stanton and the surrounding communities.
Written by the team at Groundwork Construction Co.