Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Aluminum Fence Work Looks Like in North Tustin, CA
An aluminum fence in North Tustin typically runs $3,500 – $9,000 installed, and most of our jobs finish in two to four working days once the layout is set and the permit clears. On the half-acre and larger lots above Tustin, that number is usually driven by total linear footage and gate count rather than fence height. Call (888) 578-4462 and we’ll walk your property line, check the grade, and give you a written line-item estimate at no cost.
How Our Aluminum Fence Process Runs, Start to Finish
1. Site walk and layout (day 1, about 90 minutes)
We locate the actual property line, inspect the grade, and flag what’s in the way: mature oak roots, existing retaining walls, irrigation runs, and any slope transitions. On hillside parcels in this part of Orange County, grade changes of two or three feet across a single run are common, and that’s where racked panels versus stepped panels get decided. You approve the layout and pick the style before we order anything.
2. Permitting and HOA review (3 – 10 business days, your decision point)
Because North Tustin is unincorporated, fence permits go through OC Public Works, not the city of Tustin. We handle the application and set the right height and setback on paper before a single post goes in. If your property sits inside a tract with an architectural committee, you’ll need written approval before we start, and we’ll tell you exactly what that submittal requires. You decide: standard height or a taller ornamental run if your view and privacy needs call for it.
3. Pre-marking and utility check (day 2)
Before any digging, we confirm utility locates and mark the post line. Fence posts are shallow compared to structural footings, but we never open ground without knowing what’s below, especially on older parcels that predate modern utility mapping. This is the stage where a surprise irrigation main or long-abandoned septic line gets caught before it becomes an extra.
4. Post setting and panel install (days 2 – 3)
Posts go in concrete, set plumb, and cure before racking. Panels follow, then gates, then hardware. A standard run of 150 – 250 linear feet takes about a day and a half with a two-person crew. You decide gate swing direction and latch style at this point, which matters more than people expect on a driveway-side gate.
5. Final walk and punch (day 3 – 4)
We walk the fence with you: gate operation, post alignment, cap security, and touch-up on any field cuts. Anything on the punch list gets corrected before we call the job done, and it’s covered under our 730-Day Done Right Promise. If it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Options You’ll Choose Between
Aluminum isn’t one product. What you pick here decides how the fence looks, how it holds up against the Santa Ana winds, and where the price lands.
- Residential-grade aluminum (0.040″ – 0.050″ wall): The standard for most North Tustin residential lots. Light, rust-proof, and the right fit for standard 4- to 6-foot privacy runs. Cheaper panels use thinner walls and rack under load, so we specify by wall thickness, not just “aluminum.”
- Heavy commercial-grade aluminum (0.055″+ wall): Worth it on long spans, gate frames, and exposed ridge-top runs where wind load is the concern. Costs more per linear foot, but the fence stops moving and racking after a decade.
- Powder-coated finish vs. mill finish: Powder coat is standard and comes in dozens of colors; it’s what holds up under UV and dry heat. Mill finish is a false economy out here.
- Flat-top vs. spear-top vs. ornamental styles: Pure aesthetic call. Spear-top reads more traditional; flat-top with decorative pickets reads cleaner against the ranch architecture.
- Racked vs. stepped panels: Racked panels follow the slope continuously; stepped panels hold level and drop in increments. On hillside lots this is the single biggest visual decision.
- Gate hardware: Self-closing hinges and a keyed latch for any driveway or side-yard gate. Standard latches fail faster than the fence does.
If you want to compare this against wood or vinyl before committing, our broader Fence Installation service covers those options in detail.
What Aluminum Fence Costs in North Tustin, CA
The lead number for this page is $3,500 – $9,000, and that covers materials, labor, post concrete, and a standard single gate on a typical residential lot. Here’s what pushes a job toward the top of that range:
- Linear footage: Every additional 100 feet of fence adds roughly $1,100 – $1,800 depending on grade and style.
- Gates: Each gate adds $400 – $1,200 over fence run cost, and double-driveway gates sit at the high end.
- Grade and site prep: Hillside runs, retaining wall tie-ins, and root work push toward the high end.
- Material grade: Heavy commercial-grade aluminum across a long run can add 20 – 30% to material cost.
- Permit scope: OC Public Works review and any HOA submittal add to the front-end cost but are not optional.
Your written estimate will list linear footage, panel style, finish color, gate count and hardware, post concrete, disposal, and permit handling. It typically does not include utility relocation, landscape restoration, or masonry repair to an existing wall the fence attaches to, so we call those out separately if they apply. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat North Tustin Homes Specifically Do to This Job
North Tustin’s build character shapes part of every aluminum fence we install. Most lots here are 1950s – 1970s ranch homes and later customs on half-acre-plus parcels, and that means long property lines, mature tree canopies, and older site work that predates modern utility maps. On hillside parcels along the canyon edges, graded pads and older retaining walls create slope transitions the fence has to follow, and we routinely check wall stability and drainage before setting posts. The dry Santa Ana wind season is another factor: exposed ridge runs need heavier panel walls and sturdier gate frames to avoid racking. It’s also why some North Tustin homeowners pair a fence with Patios, Walkways & Pool Decks in North Tustin when the rear yard is being reworked at the same time, or with Driveway Repair & Replacement in North Tustin if the driveway gate line is being reset. We cover North Tustin fully, and if the fence is part of a larger Fence Installation in North Tustin scope, we’ll quote it that way from the start.
Serving North Tustin, CA – Our Local Coverage Area
We serve North Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Aluminum Fence in North Tustin
Most residential aluminum fence installs take two to four working days, with permitting adding up to two weeks on top. On a standard 150- to 250-foot run, post setting and panel install are each about a day. Call (888) 578-4462 for a realistic timeline on your actual property.
Yes, most fence work in unincorporated North Tustin requires a permit through OC Public Works rather than the city of Tustin. That distinction trips up contractors from nearby cities. We handle the application, and permits are pulled and inspections passed as part of the job. Call (888) 578-4462 to discuss your property.
Usually yes. Aluminum fence posts are set in concrete but require far less digging than a masonry wall, so we rarely disturb established landscaping or hardscape beyond the post line. On hillside lots, existing retaining walls may need attention first. Call (888) 578-4462 and we’ll assess during the free estimate.
As a range, expect $3,500 – $9,000 installed on a typical residential lot, with linear footage, gates, grade, and material grade driving the number. Written estimates are line-item and free. Call (888) 578-4462 for an exact quote.
Every aluminum fence we install is covered by our 730-Day Done Right Promise, backed by a manufacturer warranty on the panels and powder coat. That’s one of the longest workmanship guarantees in residential construction, and we put it in writing. Call (888) 578-4462 with any warranty question before you sign anything.
Get a Free Aluminum Fence Estimate in North Tustin
We’ll walk your property line, check the grade, quote a line-item price, and answer every question on the spot. Calls reach a live person 24/7, and our team brings up to 12 years of experience to every job. Call (888) 578-4462 to schedule your free on-site estimate for aluminum fence in North Tustin.
Written by the team at Groundwork Construction Co.