A Groundwork company - serving Irvine, CA

ActiveYards Windows & Doors in Irvine, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ActiveYards Windows & Doors: The Irvine Owner’s Guide

We install and repair ActiveYards-compatible windows and doors in Irvine, and the typical installed window replacement runs $4,500 – $15,000 for a standard package, while impact-rated replacements (common on Irvine Ranch and Northwood homes) run $8,000 – $25,000. Door part swaps and sash repairs land well below those figures and are frequently finished in a single visit. To be clear up front: Groundwork Construction Co. of Irvine is an independent service provider, not affiliated with or endorsed by ActiveYards. We source matching and OEM-equivalent parts for their product lines and install them to spec.

Call (888) 578-4462

Owners usually discover a failed ActiveYards part in one of three ways. A door starts dragging on the jamb as a summer heat wave sets in, refusing to latch without a shoulder shove. A window sash that used to glide now sticks halfway or won’t hold its tilt. Or the hardware simply quits – a handle set that rattles loose, a multi-point lock that won’t throw its deadbolt through the strike. By the time you notice, the part has usually been on its way out for a season or two. Irvine’s inland heat and Santa Ana wind cycles are hard on seals, rollers, and weatherstripping, and the failure tends to show up all at once after years of quiet wear.

Which ActiveYards Models This Applies To

ActiveYards builds vinyl windows and patio doors across several product families, and getting the right part means matching the family, not just the opening size. The most reliable identifier is the manufacturer’s sticker on the head jamb or the master frame – it carries the product line, a model or series code, and the glass package. If the label is gone (paint, sun, or a previous remodel), we measure the rough opening, the frame face width, the sash height and width, and the hardware footprint, and we cross-reference those figures against the part catalog.

Here’s the gotcha most Irvine owners run into: ActiveYards has changed roller assemblies, tilt-latch designs, and multi-point lock hardware across production runs, and parts that look identical side by side often don’t interchange. A tilt latch from one series won’t seat in the sash routing of another, and a lock body with the same faceplate dimensions can still have a different backset. This is where OEM parts earn their price. Aftermarket equivalents can work for rollers and weatherstripping, and we use quality aftermarket where it genuinely matches spec, but for lock hardware and structural sash components, we match to the ActiveYards part number whenever it’s still available. That’s how you avoid a second failure six months out. We’re also happy to look at KraftMaid, Cambria, or Silestone finishes elsewhere in your home during the same visit, though window and door parts are our focus here.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ActiveYards Windows & Doors Is Failing

  • Door drags or scrapes the threshold. The roller assembly has worn flat or the door has settled on its hinges. In Irvine, consistent thermal expansion through summer stresses rollers and hardware faster than in coastal climates.
  • Window sash won’t stay up or won’t tilt. A failed balance or a cracked tilt latch. Once the latch cracks, the sash can drop unexpectedly – a real safety issue on a second-story window.
  • Lock or handle feels loose, won’t latch, or throws hard. The multi-point lock body or the strike has worn or shifted out of alignment. A lock that won’t fully engage is a security problem, not just an annoyance.
  • Water intrusion, fogging, or a draft at the frame. Failed weatherstripping, a compromised seal, or a frame that’s pulled out of square. Irvine wind-driven rain during storm season finds every gap in a worn seal.
  • Condensation between the panes. The insulated glass unit seal has failed, and no part swap fixes it – the IGU needs replacement, which is a glass job, not a hardware job.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Irvine, with upfront pricing and no surprises:

  • Window Replacement: $4,500 – $15,000
  • Impact Window Installation: $8,000 – $25,000

What drives the range: the number of openings, glass package (tempered, impact-rated, Low-E), frame size, story height, and whether the job needs a permit and inspection. Single-part repairs – a roller, a latch, a lock body – are quoted as parts plus labor and typically sit far below a full window replacement.

Every quote is a written line-item: parts, labor, permits if any, and disposal. The number you see is the number you pay. All work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Calls are answered by a live person, 24/7. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months.

DIY or Call Us?

You can safely check some things yourself: clean and lubricate rollers, look for visible cracks in a tilt latch, feel for drafts at the weatherstripping, and read the jamb label to identify the model. Those steps help whoever you call match the right part.

Where DIY goes wrong is anything involving glass, a second-story sash, or a lock body swap. A failed balance on an upper window can let the sash drop; a mis-seated lock body leaves a door that looks shut but isn’t secure, and that’s a security risk, not a cosmetic one. Glass replacement and second-story work also need proper handling and, in some cases, a permit. If your window or door has failed a lock, dropped a sash, or taken on water, call us at (888) 578-4462 and we’ll come out, identify the exact part, and give you a written quote – free.

FAQs

How long do ActiveYards windows and doors last in Irvine?
With normal care, a well-installed ActiveYards window or door typically holds up 15 – 25 years before major hardware or seal failure, though Irvine’s inland heat and sun exposure shorten the life of weatherstripping, rollers, and finish on south- and west-facing openings to roughly 10 – 15 years. Call (888) 578-4462 for a free assessment.

Can the failing part be repaired instead of replaced?
Often yes. Rollers, tilt latches, weatherstripping, and lock bodies are commonly swapped as standalone repairs at a fraction of replacement cost. If the problem is a failed insulated glass unit or a frame pulled out of square, a repair may not hold and replacement is the honest answer. We’ll tell you which before you commit.

How long does the swap take?
Single-part repairs – a roller, latch, or lock body – are usually finished in one visit, often under an hour per opening. A full window or door replacement takes longer per unit, and we’ll give you a realistic timeline in the written quote. Most jobs are completed in a single scheduled visit.

How do you source the ActiveYards part?
We match by model code from the jamb label or, if that’s gone, by measured rough opening and hardware footprint cross-referenced against the catalog. We use OEM ActiveYards parts wherever they’re still produced, and quality aftermarket equivalents only where they genuinely match spec. We don’t claim to stock parts locally; we source the right number for your unit.

Ready to fix it right? Call Groundwork Construction Co. of Irvine at (888) 578-4462 for your free estimate – a live person answers around the clock, we quote every job upfront, and the 730-Day Done Right Promise backs the work in writing.

Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch