A Groundwork company - serving Irvine, CA

American Standard Driveway & Pavers in Irvine, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

American Standard Driveway & Pavers: The Irvine Owner’s Guide

We install American Standard-compatible driveway and paver systems in Irvine, and a full driveway replacement typically runs $5,000 – $14,000 for concrete and $7,000 – $18,000 for pavers, with most residential jobs completed in a few working days once materials are on site. American Standard doesn’t manufacture driveway pavers, so what Irvine homeowners actually call us about is a paver system matched to an American Standard spec sheet, or a paver or base repair on a driveway where the original install used American Standard-branded components. The symptom shows up the same way almost every time: a settled corner, a loose paver rocking underfoot, sand washing out at the curb line, or a hairline crack that widens after the first winter rain.

Call (888) 578-4462

Which American Standard Models This Applies To

American Standard’s driveway and pavers line is sold by system and finish, not by a single model number stamped on the product, so matching the right replacement means pulling the original spec sheet or measuring the existing units yourself. Irvine properties most often carry the Classic and Contemporary paver families in the standard 60mm and 80mm thicknesses, and that thickness is the first compatibility gotcha: an 80mm paver sits on a deeper base course than the 60mm, and swapping one for the other without rebuilding the base causes the rocking you’re trying to fix. If you can’t find the paperwork, measure a single paver’s length, width and thickness in millimeters and note the finish color name, then photograph the joint pattern from above. That’s usually enough for us to match the unit.

On the OEM-versus-aftermarket question: American Standard replacement pavers are the cleanest color match, but a quality aftermarket paver in the same dimension and thickness is a legitimate substitute, especially for a repair section that will be hidden near a garage apron. Where we don’t compromise is thickness and base spec. A thinner paver that matches in color but not in load capacity will fail again within a few seasons in Irvine’s clay-heavy soils.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your American Standard Driveway & Pavers Is Failing

  • Pavers rocking or shifting underfoot. That movement almost always points to a failed bedding sand layer or a base that wasn’t compacted to depth, not the paver itself.
  • Sand washing out at the edges and joints. Irvine’s winter rain events push joint sand out fast when the edge restraint is missing or loose, and once the sand is gone the pavers start to spread.
  • Hairline cracks widening after rain. Cracks that grow season to season usually mean the subgrade is settling, and repointing alone won’t stop it.
  • Sunken sections near the garage apron or street. This is often a drainage problem where water ponds against the slab, and it needs the base corrected, not just the surface.
  • Color fading or efflorescence (white chalky film). Some fading is normal in Irvine’s strong UV, but heavy efflorescence points to moisture trapped under the pavers.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Irvine homeowners actually pay for this work, and what’s inside each number:

Service Installed Price Range (Irvine)
Paver Driveway Installation $7,000 – $18,000
Concrete Driveway Installation $4,500 – $12,000
Asphalt Driveway Paving $3,500 – $9,000
Driveway Replacement $5,000 – $14,000
Driveway Sealing $250 – $700

The range is driven by square footage, base depth, edge restraint, and whether we’re matching an existing paver or replacing a full run. What’s included in our numbers: the base excavation and compaction, the paver or slab material, edge restraints, joint sand, and cleanup. We quote parts and labor as separate lines so you can see exactly what the American Standard-compatible material costs versus the install. Every job is backed by our 730-Day Done Right Promise, and if it’s not done right, we make it right.

DIY or Call Us?

You can safely check a few things yourself: pull up a loose paver to look at the sand bed underneath, measure the thickness with a tape, and photograph the joint pattern so we can match the unit. What goes wrong with DIY on a driveway is the base. Homeowners routinely reset pavers on a fresh layer of sand without compacting the subgrade to depth, and the same rocking comes back after the first rainy season in Irvine. If you’re seeing widespread settlement or cracks that keep widening, stop and let us look. Call (888) 578-4462 for a free estimate, and a live person answers, 24/7.

FAQs

How long do American Standard driveway pavers last in Irvine? A properly installed paver driveway with a compacted base typically lasts 25 to 30 years or more in Irvine’s climate; the pavers themselves outlast the base, which is what usually fails first. Call (888) 578-4462 for an exact quote, estimates are free.

Can a failing driveway be repaired instead of fully replaced? Yes, in many cases a section repair, re-sanding and re-securing the edge restraint will fix it, if the base under that section is still sound. If settlement is widespread, a full replacement is the honest recommendation. Call (888) 578-4462 for an exact quote, estimates are free.

How long does the replacement take? A typical residential paver driveway in Irvine takes a few working days from base prep through joint sand, depending on square footage and site access. Call (888) 578-4462 for an exact quote, estimates are free.

How do you source the American Standard-compatible part? We match the paver family, dimensions, thickness and finish from your original spec sheet or from measurements and photos of the existing unit, then order through our vetted supplier network. Call (888) 578-4462 for an exact quote, estimates are free.

Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with American Standard. We also work with KraftMaid, Cambria, and Silestone on the interior side, but our driveway and paver work is built around American Standard-compatible systems backed by our 730-Day Done Right Promise and upfront pricing with no surprises. From foundation to finish line, we handle the whole job in one contract. Call (888) 578-4462 for a free estimate and design consult.

Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch