Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Bathroom Remodeling: The Irvine Owner’s Guide
Boral bathroom remodeling in Irvine typically runs $9,000 – $28,000 installed, and most of that swing comes down to which Boral tile, trim and surface components you keep versus replace. We install and repair Boral bathroom systems across Irvine, from Turtle Rock to Woodbridge, with written line-item quotes and a 730-Day Done Right Promise on the workmanship. Owners usually find the problem the same way: a hollow tap over a loose floor tile, a grout line that keeps reopening at the shower curb, or a Boral ceramic floor tile that flexes underfoot after years of slab movement. Groundwork Construction Co. of Irvine is an independent service provider, not affiliated with Boral, and we tell you that up front so the estimate is judged on the work, not a logo.
Which Boral Models This Applies To
Boral’s residential bathroom line covers several product families, and matching the right one matters before anything gets ordered. Their tile and stone collections (including the Cultured Stone and natural stone veneers used on bath feature walls) carry series and color names on the carton end-tabs, not on the face of the tile. Their ceramic and porcelain floor and wall tiles are grouped by series, size and PEI wear rating, and older Irvine builds often carry a discontinued series that’s no longer stocked anywhere. The label lives on the original carton, on the thin-set bucket the installer left behind, or stamped on the back of a spare tile.
If you don’t have a carton, measure the tile face to the nearest eighth of an inch and photograph the back stamp; that’s how we identify a match. OEM Boral replacements give you an exact color and size match. Quality aftermarket equivalents (from makers like Daltile or Florida Tile) can cost 30 – 50% less on a partial re-tile but will not match a discontinued dye lot, so on a visible wall we flag the shade difference before you commit. For vanity and fixture work, we also source KraftMaid, Cambria and Silestone so the whole bathroom lines up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Bathroom Remodeling Is Failing
Boral bathroom installations in Irvine don’t fail all at once. They fail at the joints, the waterproofing and the substrate, and the symptoms show up long before a tile comes loose.
- Hollow or drumming floor tiles. A tap that sounds empty means the thin-set has debonded from the slab. Irvine’s expansive clay soils and slab movement are the usual culprits, and a hollow tile is already on its way to cracking.
- Grout cracking at the shower curb and corners. Movement at the framing, not bad grout, causes this. Every regrout that fails within a year is telling you the joint needs a flexible sealant and the substrate needs checking.
- Efflorescence or white powder on the tile face. Moisture is wicking through the grout and evaporating minerals onto the surface. That points to a failed waterproofing membrane behind the Boral tile, not a cleaning problem.
- Loose or lifting wall tile above the tub. Adhesive failure or moisture behind the tile board. On a 15-year-old Irvine bathroom, this is common after a slow tub overflow leak goes unnoticed.
- Warped or discolored vanity counter edges. Water sitting at an unsealed seam. If the counter is Cambria or Silestone, the stone is fine; the seal and the substrate under it are what need attention.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest Irvine pricing, with parts and labor broken out because we quote line by line, never as a lump:
| Scope | Installed Range (Irvine) |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
What moves you up the range: tile size and pattern (large-format Boral porcelain needs a flatter substrate and more cutting), whether the waterproofing membrane is being replaced, and whether we’re matching a discontinued series. What’s always included: permit coordination where Irvine requires it, removal and haul-away of the old material, and the workmanship warranty. Our technicians have up to 12 years of experience, and every job is covered by the 730-Day Done Right Promise. Upfront pricing, no surprises: the number you see is the number you pay. Active offers include $1,000 off projects over $10,000, a free project estimate and design consult, and 0% financing for 18 months.
DIY or Call Us?
Some checks are safe and smart to do yourself. Tap every floor tile with a coin and mark the hollow ones. Look for soft spots or discoloration at the caulk line. Photograph the back of a spare tile and the carton end-tab. Measure the tile face. That information makes our estimate sharper and costs you nothing.
Where DIY goes wrong: re-tiling a shower floor or wall without replacing the waterproofing membrane. The old membrane is already compromised, and setting new Boral tile over it traps moisture that will show up as mold within a year or two. Pulling a vanity or tearing out a tub surround also means moving plumbing and, in many Irvine homes, dealing with older galvanized or PEX supply lines that don’t like being disturbed. There’s also a genuine water-damage risk: an improperly flashed shower pan can leak into the framing and the unit below for months before you notice. The honest line is that surface checks are yours; anything involving the membrane, the plumbing or the substrate belongs to a trained professional.
Call (888) 578-4462 and we’ll tell you straight whether you’re looking at a repair or a replacement, before you spend a dollar on material.
FAQs
A properly installed Boral tile floor or shower wall lasts 20 – 30 years in Irvine’s climate, and the tile itself often outlasts the waterproofing behind it. The realistic replacement trigger is the membrane and grout at 15 – 20 years, not the tile. Irvine’s dry summers and mild winters are kind to tile, but slab movement and occasional plumbing leaks shorten that timeline. For a specific assessment on your Irvine home, call (888) 578-4462 – estimates are free.
Yes, in many cases. A handful of hollow tiles can be removed and reset, cracked grout at a curb can be cut out and replaced with flexible sealant, and a failing vanity top can be reseated without touching the floor. Repair makes sense when the waterproofing isn’t compromised and the Boral series is still available. Full replacement is the smarter call when you’re seeing efflorescence or soft substrate, because the damage is already behind the tile. We’ll tell you which one you’re looking at on the estimate. Call (888) 578-4462 to schedule it.
A single-tile or partial repair is often done in one visit, while a full Boral bathroom remodel typically runs one to three weeks depending on scope, tile pattern and whether plumbing is being moved. Walk-in shower replacements usually land in the one-to-two-week range. Irvine permit timelines for plumbing changes can add a few days to the schedule, and we build that into the written quote so there are no change orders. Call (888) 578-4462 for a realistic timeline on your bathroom.
We identify the exact Boral series from the carton end-tab, the back stamp or a face measurement, then order through Boral’s distribution network or an approved local supplier. We don’t claim to stock Boral parts or carry them on a truck; material is ordered to your project and delivered before demo starts. When a series is discontinued, we present an approved aftermarket match and a written color-difference note so you decide before anything is ordered. Call (888) 578-4462 to start the sourcing and get your free estimate.
If your Boral bathroom is showing hollow tiles, cracking grout or a shower that just doesn’t feel solid anymore, don’t wait for the water damage to make the decision for you. Call Groundwork Construction Co. of Irvine at (888) 578-4462 for a free estimate and design consult. Calls are answered by a live person, 24/7, and every project is backed by our 730-Day Done Right Promise, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.