A Groundwork company - serving Irvine, CA

CGI Roofing in Irvine, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Roofing: The Irvine Owner’s Guide

If your CGI roofing has failed, we install CGI-compatible replacement roofing in Irvine, and most residential roof replacements run $8,000 – $20,000 installed, with targeted repairs landing between $400 and $1,800. We quote upfront pricing with written line-item scope, and our team can walk your roof and give you a real number, not a phone estimate. Irvine homeowners usually find out the hard way: a brown water stain spreading across the ceiling drywall, granules collecting in the gutter at the end of the downspout, or a shingle edge lifting after a Santa Ana wind event. The part itself is rarely a surprise once you’re on the roof.

Call (888) 578-4462

CGI products on Irvine homes are most often tied to the original builder’s material spec from the 1970s through the 1990s tract builds that define neighborhoods like Woodbridge, Northwood, and Westpark. That matters for matching, not just replacing.

Which CGI Models This Applies To

CGI profiles vary by series, and a same-size shingle from a different series will not match your existing field. Before we quote, we identify the underlayment spec, the shingle profile, and the color lot from the attic-side stamp, a bundle label in the garage, or an original permit packet filed with the City of Irvine. That’s the fastest way to know whether we’re matching an existing course or replacing the whole slope.

On the OEM-versus-aftermarket question for CGI specifically: OEM material guarantees the profile and color match to your existing field but carries a premium and a lead time. A quality aftermarket equivalent from a comparable line often installs for 15-25% less on the material line and performs the same when the underlayment and flashing are done right. On a full replacement, matching stops mattering and aftermarket becomes the smarter call. On a partial repair, OEM usually wins.

One Irvine-specific compatibility gotcha: many tract homes in the older villages have a low-slope section over the patio or garage that originally used a modified bitumen or low-slope membrane, not the shingle used on the main roof. If your CGI product is specified for low-slope, that section cannot use the standard shingle profile. We check this before quoting.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Roofing Is Failing

Roofs don’t fail all at once. They give you signals first, and homeowners who read them early save thousands.

  • Granules in the gutter or at the downspout splash block. Granule loss means the shingle’s UV-protective surface is wearing thin. In Irvine’s inland heat, that wear accelerates.
  • Curling or lifting at the shingle edges. Most often caused by age combined with thermal cycling and Santa Ana wind uplift. Once edges lift, wind-driven rain gets underneath.
  • Dark streaks or discoloration on the field. Algae growth, common on shingles without an algae-resistant granule treatment. Cosmetic at first, but it signals the shingle is in its second half of life.
  • Water stains on ceiling drywall or attic sheathing. This is a flashing or underlayment failure, not always a shingle failure. The repair is often smaller than the stain suggests.
  • Loose or missing shingles after a wind event. Usually a nail-pop or failed seal strip at the course edge. Left alone, the exposed underlayment degrades within a season.

What you will not see: the flashings, valley, and pipe boots that account for most leaks. Those are checked on the roof, not from the ground.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s the honest Irvine pricing picture, upfront, no surprises:

Scope Installed Range
Targeted roof repair (flashing, boots, isolated field) $400 – $1,800
Tile roof repair $600 – $2,500
Full asphalt shingle replacement $8,000 – $20,000
Metal roof installation $15,000 – $40,000

What drives the range: roof square footage, pitch, number of stories, tear-off layers, deck condition, and whether the scope includes fascia and gutter work. Irvine homes often have tile on the main roof and shingle over the patio, which changes the blended number. Our quotes are written line-item: tear-off, underlayment, flashing, material, labor, dumpster, permit. The number you see is the number you pay. Work over $10,000 qualifies for $1,000 off, and 0% financing for 18 months is available. All work is covered by our 730-Day Done Right Promise.

DIY or Call Us?

Roof work is dangerous, full stop. Walking a pitched roof in Irvine summer heat, managing a fall hazard, and pulling shingles without a fall-arrest system is not a DIY project for a homeowner. This is one of the parts where we tell every customer the same thing: don’t get on the roof.

What you can safely do: check the attic after a rain for staining or damp sheathing, clear debris from gutters and downspouts, note exactly where a stain is on the ceiling so we can find the source, and take photos from the ground. That information saves time on the diagnostic. Everything past that point calls for a trained crew on a roof with proper safety gear.

We’re an independent service provider, not affiliated with CGI. We match your existing CGI product and install to spec. Call (888) 578-4462 to schedule your free estimate. Calls are answered by a live person, 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch