Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The Irvine Owner’s Guide
We install CWS-compatible bathroom remodeling for Irvine homeowners, and a full bathroom remodel here typically runs $9,000 to $28,000 installed, depending on scope, fixtures, and layout changes. Most jobs are quoted with a written line-item breakdown and scheduled in a single coordinated sequence rather than pieced across multiple trades. Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with CWS.
Irvine owners usually land here after something stops working the way it should. A CWS vanity starts wobbling off the wall. Caulk lines around a CWS shower pan crack and pull away within months. The tile at the shower curb darkens and never fully dries. A tub-to-shower conversion that looked fine at handover starts showing movement at the drain collar. These aren’t cosmetic complaints. They’re clues about how the original install was done and what it will take to correct it.
Which CWS Models This Applies To
CWS bathroom products show up in Irvine homes in several configurations: prefab shower and tub surrounds, vanity bases, shower pans, and tile-ready wall systems. The compatibility questions we see most often aren’t about the brand name at all. They’re about the model line stamped on the unit, the drain center-to-center measurement, and the rough opening the wall was built to.
Before we quote anything, we identify the part three ways:
- The label. CWS model and series tags are usually stuck to the back of a vanity cabinet, the underside of a pan, or the inside face of a surround panel. If the label is gone, the measurement does the work.
- The drain and rough-in dimensions. Shower pans in particular are not interchangeable. A pan that’s off by half an inch at the drain collar will leak under a finished floor, and you won’t see it until the ceiling below stains.
- The wall substrate. A surround built for a specific backer thickness won’t sit flush on a wall framed to a different spec. Irvine homes built in the 1990s and 2000s often carry a different framing tolerance than newer builds in the same tract.
On OEM versus aftermarket: for structural pieces like pans and surrounds, matching the CWS series matters more than saving on a generic part. For trim, valves, and hardware, quality aftermarket equivalents hold up fine and often cost less. We’ll tell you which side of that line each part falls on before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Bathroom Remodeling Is Failing
These five symptoms account for most of the CWS bathroom calls we get in Irvine. Each one points to a specific cause, not a vague “it’s worn out.”
- Caulk and grout lines cracking at the shower base. Movement between the pan and the wall, usually from a pan set on an uneven subfloor or a surround that wasn’t shimmed correctly. Left alone, water tracks behind the wall.
- Water staining on the ceiling below the bathroom. The drain collar connection has failed or the pan membrane was compromised at install. Irvine’s older tract plumbing is often the culprit as much as the pan itself.
- A vanity pulling away from the wall or sagging at the front. The cabinet wasn’t anchored into studs, or the wall behind it wasn’t solid enough for the weight. CWS vanities are heavy, and the fastening method matters.
- Tile or surround panels lifting at the edges. Adhesive failure from a substrate that wasn’t properly prepped, or moisture getting behind the panel through a failed seal.
- A persistent musty smell that returns after cleaning. Moisture trapped behind the surround or under the pan. This one is worth checking quickly because it can mean hidden damage to framing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full CWS bathroom remodel in Irvine runs $9,000 to $28,000. A small bathroom remodel lands at $5,000 to $12,000. Individual pieces price out like this:
- Walk-in shower installation: $4,500 to $12,000
- Tub-to-shower conversion: $3,500 to $10,000
- Shower replacement: $3,000 to $8,500
- Bathroom vanity installation: $800 to $3,000
What drives the range: whether the pan or drain has to move, whether the wall substrate needs replacing, fixture grade, and tile selection. We quote parts and labor as separate line items so you can see exactly where the money goes. No-hassle upfront pricing means the number you see is the number you pay. All work is covered by our 730-Day Done Right Promise, and we pull permits and pass inspection where Irvine code requires it.
DIY or Call Us?
Some checks are safe to do yourself. Look for the CWS model label on the vanity back or pan underside. Measure the drain center-to-center distance. Photograph any cracked caulk or lifting panel edge. Those photos and numbers make a quote faster and more accurate.
Where DIY goes wrong: shower pans, drain collars, and anything behind a finished wall. Setting a pan incorrectly means a slow leak you won’t find until the drywall below is ruined. Replacing a surround over a wet substrate traps the moisture and the problem returns. And if a leak has already reached framing, opening it up yourself risks missing the real source. These are the repairs where the cost of getting it wrong is far higher than the cost of getting it done right. Call us at (888) 578-4462 and we’ll tell you honestly whether you’re looking at a repair or a replacement.
FAQs
A properly installed CWS shower pan and surround typically holds up 15 to 20 years in Irvine’s climate, though the caulk and seal lines need attention every 3 to 5 years given the seasonal humidity swings. The parts themselves outlast the seals, which is why seal maintenance matters more than most owners expect. Call (888) 578-4462 for an inspection if you’re past that window.
Sometimes, yes. Cracked caulk, a loose vanity anchor, or a single failed seal can often be repaired without replacing the unit. A compromised pan, a failed drain collar, or water behind the wall means replacement. We’ll give you the honest answer after we look at it, not a sales pitch. Call (888) 578-4462 for a free estimate.
A vanity swap or shower replacement usually takes one to two days. A full remodel with layout changes runs one to three weeks depending on permit timing and material lead times. We schedule the full sequence up front so you’re not waiting on a call-back between trades. Call (888) 578-4462 to get a timeline for your project.
We identify your CWS series from the label or from field measurements, then match the replacement to the exact drain and rough-in dimensions. If the OEM part is discontinued, we source a quality equivalent that meets the same spec and tell you plainly what changed. We don’t carry parts on a truck; every part is ordered and confirmed before install day. Call (888) 578-4462 to start with a free estimate.
We also work with KraftMaid, Cambria, and Silestone when a CWS bathroom project extends into cabinetry or countertop work. Our technicians have up to 12 years of experience, and calls are answered by a live person 24/7. Financing is available at 0% for 18 months, plus $1,000 off projects over $10,000. Call (888) 578-4462 to schedule your free estimate and design consult in Irvine.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.