Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Irvine Owner’s Guide
We install CWS-compatible driveway and paver systems across Irvine, and a full paver driveway usually runs $7,000 to $18,000 installed, depending on square footage, base prep, and the pattern you choose. Concrete runs $4,500 to $12,000. If a paver, a border course, or a sealer coat has failed, we can usually schedule an evaluation within a few days – driveways aren’t an emergency, but a failing joint or lifted paver gets worse with every rain.
Most Irvine owners find out something’s wrong the same way. A paver on the apron rocks underfoot when they pull in. A hairline crack opens along the driveway’s edge after a summer. Or water starts pooling against the garage threshold after a winter storm instead of draining to the street. The part itself is rarely the whole story – in Irvine it’s almost always base, drainage, or a joint that opened before the pavers did.
Which CWS Models This Applies To
CWS paver driveways use interlocking concrete pavers in standard thicknesses, with edge restraint and a compacted aggregate base underneath. If you’re matching a paver to an existing run, the two specs that decide compatibility are thickness (most CWS driveways use 60mm pavers, not the 40mm used for patios) and the paver’s nominal face dimensions, which vary by series and color line. The underside or a corner stamp usually carries the model reference.
Measure before you order anything. A 60mm paver set into a 40mm field will sit proud of the neighbors and rock within a season. Thickness and joint spacing matter more than color for structural fit – color can be blended, thickness can’t.
On the OEM-versus-aftermarket question for CWS specifically: discontinued series are common, and matching an exact old paver is sometimes impossible. A quality aftermarket paver that matches thickness and joint system will perform fine. The trade-off is visual, not structural. The new paver may read a half-shade off the old ones, which is normal and fades as the field weathers.
One brand note: the company also sources KraftMaid, Cambria, and Silestone for interior remodel work. Driveway projects don’t touch those lines, but Irvine homeowners remodeling more than one part of the property appreciate keeping the same contractor “from foundation to finish line.” We’re an independent provider and not affiliated with CWS.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
- Rocking pavers on the apron or entry. The base has settled or wasn’t compacted to full depth. If the paver moves, water is getting under it, and the joint sand is gone.
- Joint sand washing out after storms. Missing sand means open gaps that fill with water. Left alone, the bedding layer erodes and neighbors start to shift.
- Efflorescence – white haze on the paver face. Mineral salts rising from moisture in the base. Usually a symptom of water staying under the pavers instead of draining away.
- Edge restraint lifting or separating. The paver edge has no lateral support left, and the outer course will keep spreading outward. Fix the restraint before you touch the pavers.
- Cracks along a linear joint or a sunken section. Often subgrade movement, especially on Irvine lots with expansive soils or on grades that don’t shed water.
Irvine’s dry summers and winter rain cycles are hard on paver joints. The clay-heavy soils in some neighborhoods swell when wet and shrink when dry, and once the base loses compaction, the pavers follow. We see more joint failures after the first January rainstorm than during summer.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how CWS-compatible driveway work prices in Irvine, installed:
| Work | Installed Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Asphalt Driveway Paving | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the range: square footage, existing base condition, whether the old pavers or concrete have to be removed and hauled, drainage corrections, edge restraint repairs, and paver pattern. Straight-lay runs cheaper than herringbone. A joint-wash and reseal on an otherwise sound driveway is a few hundred dollars; a full install with a new base and new restraint is at the top of the range.
We quote line by line – parts, base material, labor, haul-off, separately – so you can see what you’re paying for. Upfront pricing, no surprises: the number you see is the number you pay. Every install is backed by our 730-Day Done Right Promise.
DIY or Call Us?
An owner can safely check a few things: measure paver thickness with a tape at a lifted corner, sweep joint sand to see where the gaps are widest, and watch where water pools after a rain. That tells you whether you’re looking at a surface fix or a base problem.
Where DIY goes wrong: pulling a paver to see underneath and not being able to set and compact it back correctly, or adding sand to a joint that has no restraint holding the edge. If the base below is loose, more sand just disappears. Replacing a full run is heavy, precise work – pavers wrong-side-up in the pattern read as a mistake forever.
If you’re not sure whether you have a surface problem or a base problem, that’s the right moment to call us. We’ll tell you honestly. Call (888) 578-4462 and we’ll schedule a free estimate.
FAQs
A properly installed paver driveway typically lasts decades – 20 years or more with good base prep and attention to joint sand and sealing. The pavers themselves outlast the base; most failures we see in Irvine trace to base compaction and drainage, not the paver material. When the base is done right, the pavers hold. Call (888) 578-4462 for an exact quote – estimates are free.
Sometimes yes. If the failure is a small localized area – a settled apron, a lifted edge course, missing joint sand – we can lift, reset, and re-compact those pavers and restore the joint. Full replacement isn’t always the answer. The dividing line is base condition: if compaction is gone across the field, patching won’t last.
A typical residential drive runs three to five working days, weather permitting: day one for tear-out and grading, two to three days for base and compaction, one to two days for paver setting, cutting, and joint sand. Concrete and asphalt timelines differ. The schedule depends on square footage and whether drainage corrections are needed.
We match by thickness, face dimensions, joint system, and color line, then source from our supplier network. Exact OEM matches for discontinued CWS series aren’t always available, so we’ll show you the closest quality equivalent and explain the visual difference before you commit. We don’t carry parts on a truck – each order is coordinated to your project. Call (888) 578-4462 and we’ll walk through the specs with you.
730-Day Done Right Promise. If it’s not done right, we make it right. Calls are answered by a live person 24/7, our technicians have up to 12 years of experience, and every crew member is background-checked and arrives in uniform. We offer 0% financing for 18 months and $1,000 off projects over $10,000. The service being discussed in this guide is general curb and driveway work, and no pricing above is a formal bid – final numbers come from an on-site walk.
Call Groundwork Construction Co. of Irvine at (888) 578-4462 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.