A Groundwork company - serving Irvine, CA
C

CWS Construction Service in Irvine, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Irvine Homeowners Choose CWS Construction

We provide independent CWS construction service in Irvine, connecting homeowners with vetted local professionals who install and repair CWS (Cabinet Works Surfaces) cabinetry and surfacing across the city. What sets our CWS work apart is a crew that knows the actual failure points of CWS frameless boxes, thermofoil doors, and dealer-channel quartz, not a generic installer swapping parts. To be clear: Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with, authorized, sponsored, or endorsed by CWS. CWS products reach Irvine kitchens and baths through dealers and builders, never factory-direct, so independent pros who work these lines daily understand the hinge, finish, and surface quirks better than any warranty desk. Call (888) 578-4462 to schedule a free estimate.

Call (888) 578-4462

Why Trust Groundwork Construction Co. of Irvine for Your CWS Construction?

Our technicians have up to 12 years of experience working with CWS cabinet and surfacing product lines across Irvine. That means they recognize the difference between a CWS Euro-style frameless box that just needs a hinge reset and one where the MDF panel has swollen past the point of a clean fix. They know which concealed European hinges CWS specifies on full-overlay doors and which aftermarket equivalents hold the same screw pattern, so hardware and finish stay consistent from run to run.

Every job is covered by our 730-Day Done Right Promise. If a door front we set isn’t seating right, or a countertop seam we helped place opens up, we make it right within that window. Technicians arrive background-checked and in uniform, and our line is answered by a live person 24/7.

We keep the work warranty-safe by matching OEM-compatible hardware where CWS parts are available and documenting the components we replace, so an Irvine homeowner’s CWS warranty on the box or slab isn’t put at risk by a repair. Most jobs start with a diagnosis that tells you what’s actually failing, not a sales pitch for a full tear-out.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common CWS Construction Problems We Fix in Irvine

CWS cabinetry and surfacing are built to a price and a spec, and the failure modes are predictable once you’ve seen enough of them. Here’s what we run into most in Irvine:

  • Thermofoil and laminate door faces lifting at the edges – On CWS shaker and slab-front cabinets in thermofoil finish, the edges near the dishwasher and range curl first. Heat-and-steam cycling breaks down the adhesive that bonds the foil to the MDF core, and once the edge lifts, moisture gets behind the face. Irvine’s dry summers don’t cause this. Steam from the appliances does.
  • Concealed European hinges working loose – The full-overlay concealed hinges on CWS frameless doors anchor into particleboard or MDF door panels. Over years of opening and closing, the screw threads strip out of the panel, the door sags, and it rubs against the adjacent cabinet. A door that won’t close flush is usually this, not a bent hinge.
  • Quartz slab seams and edge chips at the sink cutout – CWS quartz supplied through dealer and fabricator channels shows hairline cracks or chips when the fabricator cut the sink opening too close to the edge or skipped proper support under the cutout. The seam near the sink is the first place it shows. This is a fabrication issue, not a material defect.
  • Painted shaker doors cracking at stile-and-rail joints – Painted CWS shaker doors develop hairline cracks where the stiles and rails meet, and the paint yellows near windows as UV exposure builds. A joint that moves seasonally will always crack the paint film over it. It’s cosmetic until it isn’t.
  • Drawer boxes and runners wearing out – Frameless CWS boxes use side-mount or undermount runners that wear and start to stick or drop. A drawer that drags or sags is usually a runner replacement, not a whole-box rebuild.

A typical CWS service call starts with a homeowner noticing the cabinet doors along the dishwasher run no longer close flush, and the thermofoil edge is curling off the door face. The usual cause is heat-and-moisture cycling degrading the foil adhesive while the concealed hinges have stripped out of the door panel. A qualified local pro replaces the affected door fronts, re-bores or reinforces the hinge plates, checks the adjacent boxes for swelling, then refaces the run and resets the quartz countertop over it.

CWS Parts & Our Repair-vs-Replace Approach

We match CWS-specific hinges, drawer boxes, door fronts, and edgebanding wherever the OEM part is available, so hardware and finish stay consistent. We don’t claim to stock CWS parts locally. For each job, the pro on it sources the correct component through dealer and fabricator channels and confirms the match before installation. When a CWS door style has been discontinued, a qualified pro sources a close-match door and blends it onto the less-visible runs rather than replacing an entire kitchen.

The honest call is usually repair or reface when the boxes and layout are sound. Full replacement only makes sense when water damage or sagging box construction turns refacing into a cosmetic patch over a structural problem. Call (888) 578-4462 for a free estimate and we’ll tell you which side of that line your CWS kitchen or bath falls on.

Our CWS Service Process – Step by Step

  1. 1
    Diagnosis. We open the doors that won’t close, pull the drawers that drag, and inspect the thermofoil edges and box seams. We identify whether the failure is a hinge, a door face, a runner, a slab seam, or the box itself, and we tell you which CWS component is actually failing.
  2. 2
    Repair or install. The pro sources the OEM-compatible part or close-match door front, then sets hinges, resets drawer runners, refaces the run, or installs the new cabinet or countertop. Every step follows the spec for the CWS product line involved.
  3. 3
    Test. Doors get opened and closed across the full swing, drawers get loaded and run, and countertop seams and sink cutouts get checked for movement or gap. Nothing gets called done until it operates the way it should.
  4. 4
    Warranty. Work is backed by our 730-Day Done Right Promise, and we document what we replaced so your CWS warranty on the box or slab stays intact.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CWS Products We Service & Install in Irvine

We service and install across the CWS line: Euro-style frameless cabinetry with full-overlay doors and concealed European hinges; shaker and slab-front cabinet door styles in painted and thermofoil finishes; quartz and granite countertop slabs supplied through dealer and fabricator channels; and vanity and bath cabinetry lines for powder rooms and master baths. Sub-services include cabinet installation and refacing, quartz and granite countertops, and tub-to-shower conversion. On the shower side, a CWS bath vanity and the new shower surround get planned together so the footprint, plumbing wall, and cabinet clearance work as one layout, not two separate jobs.

We Also Service These Brands

Groundwork Construction Co. of Irvine isn’t tied to a single brand. We also work with KraftMaid, Cambria, Silestone, and Kohler, so a CWS kitchen can pair a CWS cabinet box with a Cambria or Silestone slab and Kohler fixtures without a second contractor. The multi-brand capability means one team coordinates the trades and the timelines.

FAQs – CWS Construction Service in Irvine

Service Irvine Price Range
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Kitchen Island Installation $3,000 – $10,000
Tub-to-Shower Conversion $3,500 – $10,000
Bathroom Vanity Installation $800 – $3,000
Full Kitchen Remodeling $14,000 – $45,000
Full Bathroom Remodeling $9,000 – $28,000

Pricing is upfront, and the number you see is the number you pay. Call (888) 578-4462 for an exact quote on your Irvine job, estimates are free.

Book Your CWS Service in Irvine, CA

If a CWS cabinet door won’t close, a thermofoil edge is peeling, or a countertop seam is opening at the sink, we can diagnose it. Groundwork Construction Co. of Irvine connects you with vetted local professionals who know the CWS line and back their work with our 730-Day Done Right Promise. Call (888) 578-4462 for a free estimate and design consult.

Written by the team at Groundwork Construction Co. of Irvine.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch