A Groundwork company - serving Irvine, CA

Delta Windows & Doors in Irvine, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Windows & Doors: The Irvine Owner’s Guide

We install Delta-compatible windows and doors across Irvine, and a typical full replacement runs $4,500 – $15,000 for standard windows or $8,000 – $25,000 for impact-rated units, with most single-unit swaps finished in one visit. Owners usually land here the same way: a bedroom window that won’t latch in the evening heat, a patio slider grinding on its track, or a fogged double-pane they noticed when the marine layer finally cleared. The part itself is almost never the mystery. Matching it to the exact Delta model is.

Call (888) 578-4462

Which Delta Models This Applies To

Delta has sold a wide spread of window and door lines over the years, and the same part can change spec between product families. Before anything gets ordered, we pull the manufacturer label from the window sash edge, the door jamb, or the frame head and read the model code, series prefix, and glass date. At least once a month we get called out to an Irvine home where a homeowner ordered a roller or sash balance off a measurement alone and it didn’t fit. The label is the difference between one trip and three.

Sizing is where most online orders fail. Vinyl and aluminum Delta sliders from different production runs can differ by a quarter inch on the same nominal width, and balances come in length and weight classes that look identical until you install them. For OEM versus aftermarket: original Delta parts guarantee fit, but a quality aftermarket balance or roller from a known manufacturer is fine on older units where OEM pieces are discontinued. For Irvine homeowners, we usually lean OEM on anything installed in the last fifteen years and aftermarket on legacy stock. This is an independent service, not a Delta-affiliated program. We also handle KraftMaid, Cambria, and Silestone for other parts of the home.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Windows & Doors Is Failing

Windows and doors rarely fail all at once. They fail in ways that show up in a specific order, and the order tells us what to replace.

  • Fog or condensation between glass panes. The sealed unit’s perimeter seal has failed and moisture is inside the airspace. Replacing just the glass unit is often cheaper than the whole window if the frame is sound.
  • Window won’t stay up, or slams down. The sash balance has lost tension or the coil spring has broken. Common on double-hung and single-hung units after extended use.
  • Patio door scrapes the track or grinds when sliding. The roller assembly has worn, flattened, or seized. On Irvine’s inland-side homes with hard water staining, we also see mineral scale building up in the track channel.
  • Drafts, whistling, or rattling at the frame. Weatherstripping has compressed, cracked, or pulled loose, or the door sweep has hardened. Cheap to fix, expensive to ignore in a coastal wind corridor.
  • Latch or lock won’t engage cleanly. The multipoint lock or keeper has slipped out of alignment, often after ground settling or a slightly out-of-square frame. Sometimes it’s a five-minute adjustment, sometimes a hardware swap.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Window replacement in Irvine runs $4,500 – $15,000 for a typical home, and impact window installation runs $8,000 – $25,000 where the owner wants glass rated for the conditions. For a single part swap (one balance, roller, or weatherstrip), we price parts plus labor line by line, and most single-part jobs land well under the whole-window numbers. Here’s what drives the range:

  • Number of units and whether glass goes with the part or the whole sash is replaced.
  • Whether the frame is sound or the opening needs reframing.
  • OEM part availability versus aftermarket equivalent.
  • Glass spec (standard, low-E, impact-rated).

Every job carries the 730-Day Done Right Promise, backed in writing. Upfront pricing means the number we quote is the number you pay, with no change orders once work starts. Financing at 0% for 18 months is available, and projects over $10,000 qualify for $1,000 off. Call (888) 578-4462 for exact pricing.

DIY or Call Us?

Some checks are safe to do yourself. You can inspect the weatherstripping for cracks, clear mineral scale from a door track with a plastic scraper, tighten visible hinge screws, and read the manufacturer label. That’s where most Irvine owners should stop.

Balance and coil spring replacement is where DIY goes wrong. The mechanism is held under tension, and releasing it without the correct tool or technique can send parts flying at speed or drop a sash suddenly. That’s a real injury risk, not a scare tactic. Roller replacement on a patio slider looks simple until the door needs lifted out of the frame, and doing it wrong strips the frame channel. A trained, background-checked technician carries the right parts and does the swap safely on the first visit. Call (888) 578-4462 to schedule a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch