A Groundwork company - serving Irvine, CA

Dvele Bathroom Remodeling in Irvine, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Bathroom Remodeling: The Irvine Owner’s Guide

We install Dvele-compatible bathroom remodeling in Irvine, with full bathroom projects typically running $9,000 – $28,000 installed depending on scope, fixtures and finish level. Small bathroom remodels land in the $5,000 – $12,000 range. Bathroom work is planned, permitted and scheduled, not same-day, so you’ll get a firm start date rather than a rushed promise.

Call (888) 578-4462

The failures we see on Dvele bathroom builds tend to surface slowly. A vanity cabinet door that won’t stay aligned. A tile grout line cracking along a shower wall in the third or fourth summer. A shower pan that flexes when you step near the drain. Owners usually call after they’ve noticed three or four small issues that all point back to the same install detail or moisture problem.

Which Dvele Models This Applies To

Dvele builds its homes around a pre-fabricated structural core, and the bathroom assemblies are built to that core’s dimensions, not to standard stick-built framing. That matters when you’re replacing a vanity, a shower valve surround or a tile substrate: the wall cavity depth behind a Dvele bathroom wall can differ from a conventional 2×4 frame with drywall, and backer board thickness varies with how the module was finished at the factory.

Before we quote anything, we measure three things: the cabinet opening width at the floor and at the counter line (they’re often within 1/8 inch on a factory module, which leaves little fudge room), the drain center-to-wall distance behind the toilet or shower, and the finished wall depth around the shower valve. A Dvele modular label and a serial plate are usually inside the main electrical panel door or near the water heater closet; that label tells us the model year and which module spec was used. From there we match OEM Dvele trim and cabinet components when available, or specify a quality aftermarket equivalent sized to that cavity.

Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with Dvele. We also source Kohler, KraftMaid, Cambria and Silestone components for Irvine bathroom remodels when an owner wants to upgrade beyond the original factory spec.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Dvele Bathroom Remodeling Is Failing

  • Grout cracking along the shower wall or floor corners. Moisture is getting behind the tile and the substrate is moving, usually because the module’s wall panel wasn’t fully sealed at the factory joint. Left alone through two Irvine summers, that becomes a soft spot behind the tile.
  • Vanity doors that drift out of alignment or rub the frame. On a Dvele vanity, the cabinet box is set against a wall that can be straighter than a traditional framed wall, so the hinge adjustment range gets used up fast. It’s either a hinge issue or the box wasn’t shimmed true at install.
  • A shower pan that flexes or sounds hollow near the drain. That’s a bedding failure under the pan, and it’s the one sign we don’t advise ignoring. Flexing pans crack at the drain collar and start leaking into the floor assembly below.
  • Peeling paint or bubbling drywall on the wall opposite the shower. This is the classic sign of a slow leak behind the valve wall. It shows up on the bedroom or closet side long before it shows up in the bathroom itself.
  • A toilet that rocks or a floor tile that lifts at the flange. Either the closet flange wasn’t set flush to the factory subfloor, or the wax seal has failed and water has softened the tile bed.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Irvine owners actually pay for Dvele-compatible bathroom work, installed, with parts and labor together. These are the ranges we quote and the ranges we hold.

Scope Installed Range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What pushes a quote toward the top of the range: a shower pan rebuild that requires re-bedding and new waterproofing, tile that has to be matched to an existing pattern, or a valve replacement that means opening the factory wall panel. What keeps it low: a straight vanity swap or hinge and hardware replacement. Every quote is line-item and upfront. The number you see is the number you pay, backed by our 730-Day Done Right Promise on the workmanship.

DIY or Call Us?

You can safely do a few things yourself. Check that vanity doors are square by holding a level against the frame. Look behind the shower valve wall for soft drywall or paint bubbling. Press a hand firmly around the shower drain to feel for flex. If you find flex in the pan, stop there.

Shower pan rebuilds and valve work are where DIY goes wrong, and not because the homeowner lacks skill. Under a Dvele shower pan there’s a waterproofing layer and a drain assembly that has to be bedded and sealed to spec. Improper bedding is a slow leak that shows up as damaged flooring six months later, and by then you’re paying for both repairs. Bathroom tile demo also means cutting into a factory-finished wall panel, which is a one-way trip if the replacement sizing is wrong.

Call (888) 578-4462 to schedule a free estimate. We answer live, day or night, so you won’t be waiting on a callback.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch