Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Irvine Homeowners Choose Dvele Construction
We provide independent Dvele construction service in Irvine: factory-built modular wall, floor and roof assemblies coordinated with on-site finish work, roof tie-ins, seam repairs and kitchen and bath remodels. What sets our Dvele work apart is that we treat the module joints and the roof-to-module interface as the actual risk area, not an afterthought. Irvine has thousands of post-1965 planned-community homes, and the modular and high-performance segment grows every year; we work on the site-side build-out these assemblies require.
Groundwork Construction Co. of Irvine is an independent Dvele service provider. We’re not affiliated with, authorized by or endorsed by Dvele. Call (888) 578-4462 and a live person answers, day or night.
Why Trust Groundwork Construction Co. of Irvine for Your Dvele Construction?
Dvele’s proprietary modules, panel connections and envelope components aren’t off-the-shelf. Working on them means understanding how a factory drawings set meets an Orange County roof plane after a Santa Ana wind season. Our technicians have up to 12 years of experience, and every job starts with tracing how the building actually performs, not with a sales sheet.
Where a connection or panel is genuinely Dvele-specific, we source it through Dvele or the component suppliers behind their assemblies. For finishes and fixtures – quartz, tile, cabinet hardware, roofing accessories – we use spec-matched quality aftermarket products that meet or exceed the original. Roof, envelope and kitchen work is handled to manufacturer and code specification, documented in writing, and covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Pricing is upfront and confirmed before we open anything up. Background-checked, uniformed technicians show up on every Irvine project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Irvine
Most Dvele service calls in Irvine come down to a short list of places where a prefabricated assembly meets the site. Here’s what we actually find, and why:
- Module joint and seam failure. Where two factory boxes marry on site – two-story modular residences especially – weatherproofing and flashing at the wall and roof seams is the recurring weak point. If it wasn’t detailed correctly at assembly, water shows up as staining along the junction line, not as a broad roof leak.
- Roof-to-module interfaces under-detailed for site conditions. A detail that looked fine on the factory drawing can leave standing water, misaligned gutters or sealant failing early on low-slope sections. This is designed-in vs. built-in: the fix is rebuilding the flashing and drainage path, not slapping new sealant on top.
- Factory millwork out of alignment after settling. Prefinished kitchen runs and shower pans in single-story modular homes need scribing and re-fit once modules settle onto their foundation. Cabinet doors stop lining up, countertop seams go uneven, shower pans sit proud of the tile. Usually a re-shim and re-scribe, not a replacement.
- Thermal-envelope penetrations. In Passive House-level Dvele homes, high-performance walls and roofs are sealed to factory specs – until on-site trades cut vent boots, conduit and dryer vents through them. Those penetrations are where air sealing quietly degrades and where we start an energy-loss diagnosis.
- Stucco and wall-interface cracking at the perimeter. Irvine’s hot dry summers and dry-heat UV exposure work stucco and sealant joints hard. On module-built homes, movement at the module boundary concentrates cracking at seams. We repair the substrate and joint, not just the paint film over it.
Dvele Parts & Our Repair-vs-Replace Approach
Factory-built doesn’t mean easy to source. Dvele’s proprietary modules, panel connections and envelope components come only from Dvele or the component suppliers behind their assemblies. We don’t claim to stock Dvele parts; we diagnose first, then source what’s needed and tell you the lead time before we order.
Our honest stance: repairs at module seams, roof-to-module junctions and envelope penetrations are almost always worth doing correctly the first time – premature replacement just re-exposes the same detail. Wholesale module replacement is rare and justified only when the issue is structural, not cosmetic. Finish work (quartz, tile, cabinet hardware, roofing accessories) gets spec-matched quality aftermarket products that meet or exceed the original. Call (888) 578-4462 for a free estimate on Dvele roof repair or kitchen work in Irvine.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We trace the actual water path or movement source – opening a module seam carefully to protect the high-performance envelope, or checking foundation settling before blaming factory millwork. No guesswork.
- 2
Repair or install. We rebuild flashing, weatherproofing and seam detailing to spec, or install new roofing, kitchen or bath systems coordinated with the module layout so we don’t compromise the thermal envelope.
- 3
Testing. We water-test roof seams and junctions and check air sealing at penetrations. Cabinets and shower pans get checked for level and flush after re-fit.
- 4
Warranty. Every Dvele job in Irvine is covered by our 730-Day Done Right Promise – in writing – on top of any applicable manufacturer warranty.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Irvine
We service and install across the Dvele line: two-story modular single-family residences with stacked box modules, single-story modular homes with prefinished kitchens and baths, Dvele ADU modular units, and high-performance homes built to Passive House-level envelope standards. On the site side that means roof repair and roof replacement at the module interface, full kitchen remodeling and cabinet re-fit, walk-in shower and tub-to-shower work in prefinished baths, and envelope detailing at penetrations. We serve these across Irvine, from Woodbridge and Northwood to the Spectrum and UCI-adjacent condo clusters.
We Also Service These Brands
We work across the brands Irvine homeowners actually have in their homes, not just Dvele. That includes KraftMaid and Cambria in kitchens, Silestone and Kohler in baths and countertops, plus roofing and window lines from GAF, CertainTeed, Andersen and Pella. One trusted crew, multiple trades, no single-brand dependency.
FAQs – Dvele Construction Service in Irvine
Yes – an independent contractor can work on your Dvele home as long as they understand how the modular assemblies behave on site and source genuine components where required. We coordinate factory-built wall, floor and roof modules with on-site trades and protect the high-performance envelope during every repair. Call (888) 578-4462 for a free estimate.
At the module-to-module seam and the roof-to-module junction, not the broad roof membrane. Under-detailed flashing or early sealant failure on low-slope sections lets water track in at the junction line. We trace the path, rebuild the flashing and weatherproofing, then repair finishes. Call for a free Irvine roof repair estimate.
Usually not a defect – it’s modules settling on their foundation. Factory cabinet runs and countertop seams shift, and they need re-scribing, re-shimming and re-sealing. We do that rather than replace, and the same applies to shower pans that no longer sit flush. Call (888) 578-4462 to schedule an assessment.
No. We’re an independent Dvele service provider and aren’t affiliated with, authorized by or endorsed by Dvele. We work to manufacturer and code specifications on every job and back our work with our own 730-Day Done Right Promise.
Yes, in most cases. Bath remodels involve the prefinished wet areas and finishes, not the structural modules, so we coordinate around the module layout and protect the envelope. Walk-in shower installation runs $4,500 – $12,000 in Irvine and tub-to-shower conversion runs $3,500 – $10,000. Call (888) 578-4462 for an exact quote – estimates are free.
Dvele-specific pricing in Irvine depends on the scope: roof repair runs $400 – $1,800, roof replacement $8,000 – $20,000, full kitchen remodeling $14,000 – $45,000, and walk-in shower installation $4,500 – $12,000. Here are the standing ranges:
| Service | Irvine Price Range |
|---|---|
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Call (888) 578-4462 for an exact quote – estimates are free.
Book Your Dvele Service in Irvine, CA
Whether it’s a seam leak at a module junction, a roof tie-in that needs rebuilding, or a kitchen re-fit after settling, we’ll diagnose it, quote it upfront and back the work with our 730-Day Done Right Promise. Call (888) 578-4462 for a free estimate on Dvele construction service in Irvine.
Written by the team at Groundwork Construction Co. of Irvine.