Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Irvine Homeowners Choose ECO Window Systems Construction
We provide independent ECO Window Systems construction, repair, and service across Irvine, from single window tune-ups to full replacement projects on the 2000, 3000, 5000, and 7000 Series lines. What makes our work different is familiarity: we’ve handled these specific windows and sliding doors across hundreds of homes, so we recognize their failure patterns before the damage spreads. We’re not authorized by ECO Window Systems, and we don’t claim to be. We’re just very good at them. Live person, 24/7 at (888) 578-4462.
Why Trust Groundwork Construction Co. of Irvine for Your ECO Window Systems Construction?
Our technicians have up to 12 years of experience, and a good share of that has been spent working on ECO Window Systems products specifically. That matters with windows. A 3000 Series aluminum slider and a 5000 Series vinyl casement fail for completely different reasons, and the repair that fixes one can make the other worse.
We source OEM-compatible parts and follow warranty-safe service practices, which means we don’t do anything that hands a manufacturer grounds to void your coverage. Our approach is simple: figure out what actually failed, tell you honestly whether it’s worth repairing, and do the work right the first time we’re out there. Every job is covered by our 730-Day Done Right Promise, backed in writing. Most jobs are completed in a single visit. Every technician is background-checked and arrives in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ECO Window Systems Construction Problems We Fix in Irvine
These are the issues we see most often in Irvine homes, and each one traces back to a specific part and a specific cause. If any of these sound familiar, you’re not imagining it.
- Worn rollers and track misalignment on 3000 Series aluminum sliders. The window starts dragging, then it starts leaking air. Degraded rollers are the root cause, but accumulated debris in the track speeds up the wear, and Irvine’s dry, dusty summers push grit into that channel week after week. Replace the rollers, realign the track, adjust the sash, and the window glides again with its seal intact.
- Failed dual-pane seals on 7000 Series sliding glass doors. Fogging between the panes is the tell. The seal that holds the insulating gas has failed, and once moisture gets between the glass, no amount of cleaning fixes it. This shows up faster on doors facing the afternoon sun, where daily thermal cycling works the seal loose over time.
- Corrosion of vinyl casement hinges on 5000 Series windows. Irvine’s semi-arid basin still carries marine-influenced moisture, and that’s enough to corrode hinges on vinyl casements that face the weather. The window binds, then stops closing flush, then the seal fails. Cleaning and lubricating the hardware once or twice a year stops this before it starts.
- Water infiltration through deteriorated weatherstripping on 2000 Series single-hung windows. Worn weatherstripping lets wind-driven rain past the sill. Left alone, water reaches the frame and the interior wall, and frame rot follows. New weatherstripping is inexpensive. Rotted framing isn’t.
- Glass seal failure and sash damage on older impact-rated units. The laminated glass holds, but the edge seal and sash hardware age. If wind-driven rain is getting past the frame on an impact unit, the glazing isn’t usually the culprit. The perimeter seal is.
ECO Window Systems Parts & Our Repair-vs-Replace Approach
We source OEM ECO Window Systems parts whenever they’re available, because exact fit matters on rollers, hinges, and weatherstripping. When a part is discontinued or backordered, we use high-quality aftermarket equivalents that meet or exceed the original specification, and we tell you which one is going into your window before the work starts.
Repair versus replace is a decision we make with you, not for you. Worn rollers, failed weatherstripping, a sticking hinge, a misaligned track: these are repairs, and they’re usually the sensible call. A buckled frame, rot that reaches the structural components, or the same seal failing on the same door twice in a few years is the point where replacement often costs less than the cycle of fixes. We put the trade-off in writing with upfront pricing, so the number you see is the number you pay. If you’re weighing it, call (888) 578-4462 and we’ll walk through it.
Our ECO Window Systems Service Process – Step by Step
- 1
Diagnosis. We identify the exact series and configuration first, then test operation, check the seals, and inspect the frame and track. A 3000 Series slider that “sticks” gets a different diagnosis than a 5000 Series casement that “won’t close.”
- 2
Repair or install. For repairs, we replace the failed component (rollers, hinges, weatherstripping, glass unit) and re-align as needed. For replacement, we match the new unit to your opening and existing trim so the exterior finish stays consistent.
- 3
Test. Every window and door gets operated through a full cycle, checked for smooth travel and flush closure, and inspected at the seal. We do this with you present whenever possible.
- 4
Warranty. The workmanship is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterECO Window Systems Products We Service & Install in Irvine
We service and install the full range of residential ECO Window Systems lines in Irvine, including the 2000 Series single-hung windows, the 3000 Series aluminum sliding windows, the 5000 Series vinyl casement windows, and the 7000 Series dual-pane sliding glass doors. We handle hardware replacement, glass unit replacement, weatherstripping renewal, track and sash realignment, and full window and door replacement. If you’re not sure which series you have, the frame or the glass edge will usually tell us.
We Also Service These Brands
Our window and door work isn’t limited to one name. We also handle KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures and plumbing, along with a broader set of window and door lines. That range means we’re not tied to a single manufacturer’s parts chain. When one brand’s component is backordered, we have alternatives that serve the same purpose.
FAQs – ECO Window Systems Construction Service in Irvine
No. We are an independent service provider and have no affiliation with or authorization from ECO Window Systems. We’re a construction company that has installed and serviced their products across hundreds of homes in Irvine, and we make no claim to represent the manufacturer.
Yes, whenever they’re available. We source genuine ECO Window Systems parts first for exact fit and function, and when a part is discontinued or on backorder, we use high-quality aftermarket equivalents that meet or exceed the original specification. We tell you which one we’re using before we start.
Most jobs are completed in a single visit. A roller replacement or weatherstripping renewal on a 3000 Series or 2000 Series unit is usually a matter of hours. Full window replacement or a multi-unit installation runs longer, and we’ll give you a realistic timeline in the estimate rather than a number that sounds good.
We cover the 2000 Series single-hung windows, 3000 Series aluminum sliding windows, 5000 Series vinyl casement windows, and 7000 Series dual-pane sliding glass doors. If your unit isn’t one of those, send us a photo of the frame or glass edge and we’ll confirm.
Not when it’s done correctly. Our work is warranty-safe, meaning we follow practices that preserve your manufacturer coverage, and we don’t modify the window in ways that would void it. If a repair touches something your warranty covers, we tell you before we proceed. Call (888) 578-4462 with your model details and we’ll sort out what’s covered.
Window replacement in Irvine typically runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000, with smaller repairs like roller or weatherstripping replacement priced individually. Roof repair, which often comes up when window leaks have gone unaddressed, runs $400 – $1,800. The ranges below reflect Irvine market pricing:
| Service | Typical Irvine Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Call (888) 578-4462 for an exact quote. Estimates are free.
Book Your ECO Window Systems Service in Irvine, CA
If your ECO Window Systems windows are sticking, fogging, or leaking, we can take a look. Every estimate is free and comes with a design consultation on replacement work, plus $1,000 off projects over $10,000 and 0% financing for 18 months. Call (888) 578-4462 to schedule.
Written by the team at Groundwork Construction Co. of Irvine.