Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Bathroom Remodeling: The Irvine Owner’s Guide
Bathroom remodeling around existing ES Windows units in Irvine runs $9,000 – $28,000 installed, and the number is driven mostly by what has to move around the window opening versus what can stay exactly where it is. If your ES Windows bathroom window has fogged glass, a sticky sash, or a frame that’s drawing moisture at the sill, those are the symptoms Irvine homeowners call us about most. The window itself is rarely the whole job; it’s usually the trigger that starts the remodel conversation, and we build the scope around keeping a sound ES unit in place or replacing it cleanly as part of the project. We’re an independent contractor, not affiliated with ES Windows, and we’ve been doing this work since 2014 under a 730-Day Done Right Promise.
Key Takeaways
- Full bathroom remodel with ES Windows integration: $9,000 – $28,000 in Irvine.
- Small bathroom remodel scoped around an existing ES unit: $5,000 – $12,000.
- The window opening is the single biggest cost driver: keeping it means keeping tile and waterproofing intact.
- Live person answers our line, 24/7, and estimates are free.
Which ES Windows Models This Applies To
ES Windows is a California manufacturer, so most of what we encounter in Irvine bathrooms is a vinyl-framed unit built for coastal and inland CA conditions: fixed picture windows over tubs, single-hung and double-hung sashes in shower-adjacent walls, and casement or awning units with crank operators. The exact model line matters less than what’s stamped on the glass: pull the lower sash or shade and look for a permanent etch with the manufacturer name, a model or series code, and the glass build (tempered, Low-E, laminated). Bathroom units must be tempered by code in most jurisdictions because they sit low or near wet surfaces, so verify the “tempered” stamp before you assume any replacement glass will match.
Here’s the compatibility gotcha most Irvine owners don’t know: ES Windows changed its frame profile at least twice across product generations, so a replacement sash pulled for a 2008 unit typically won’t seat in a 2016 unit even when the nominal size matches. Measure the visible glass, the rough opening, and the frame depth, not just the width-by-height on the label. On the OEM-versus-aftermarket call, ES-branded sashes carry the exact profile; a quality aftermarket sash can match dimensional fit but often differs slightly in weatherstripping and hardware pattern. We source what actually fits your unit rather than forcing a generic part.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Bathroom Remodeling Is Failing
- Fogging between the panes. Seal failure in the insulated glass unit, common after 10 – 15 years of Irvine’s hot-dry summers cycling against shower humidity. The glass itself isn’t broken; the argon seal is.
- Water staining at the sill or drywall below the window. Usually failed flashing or caulk at the exterior sill, not the window frame. Left alone, it rots the rough-opening framing.
- A sticky or hard-to-crank sash. Worn balance springs on a single-hung or a stripped crank operator on a casement. Repairable if the frame is sound.
- Condensation on the inside glass in winter. Often points to bath ventilation failing, not the window. An underpowered exhaust fan dumps moisture the ES unit can’t handle.
- Draft or daylight at the frame edge. Failed perimeter seal or compressed weatherstripping. In shower-adjacent ES Windows, this is also where mold shows up first.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Bathroom remodeling built around your ES Windows in Irvine lands in these ranges. Each quote is line-item and the number you see is the number you pay.
| Scope | Installed Range |
|---|---|
| Full bathroom remodel (window integration) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
| Window replacement (single unit) | $4,500 – $15,000 |
What drives the range: whether the ES unit stays in place (cheapest, protects tile and waterproofing) or gets replaced (adds framing, flashing, glass, finish). Tile selection, plumbing relocation, and venting upgrades move the number too. All work is covered by our 730-Day Done Right Promise, and 0% financing for 18 months with $1,000 off projects over $10,000 is available.
DIY or Call Us?
An owner can safely check the glass stamp, measure the opening, re-caulk a failed exterior bead, and verify the bath fan actually exhausts. Those are smart, low-risk steps. What goes wrong on DIY ES Windows bathroom work is the part homeowners underestimate: cutting into a waterproofed shower surround to swap a window or re-flash a sill breaches the membrane and hides the failure behind tile until it’s a much bigger repair. And anything involving tempered glass replacement or wall opening should be pulled by a licensed pro who verifies the tempered stamp and pulls the permit. If your window and remodel are tied together, that’s a job for the crew. Call the team at Groundwork Construction Co. of Irvine at (888) 578-4462 for a free estimate. Live person, 24/7.
FAQs
A quality ES Windows vinyl-framed unit typically runs 15 – 20 years in Irvine before seal failure or hardware wear shows. The insulated glass usually fails first, around year 10 – 15, because the seal degrades faster than the frame under SoCal UV and heat cycling. If fogging has started, call (888) 578-4462 for an exact quote on repair versus replace; estimates are free.
Often yes. A fogged insulated glass unit can be re-glazed without replacing the whole window, and worn balances or crank operators on an ES unit are replaceable. Structural frame damage or rot at the rough opening means replacement. We assess which side of that line you’re on before recommending anything. Call (888) 578-4462 for a straight answer.
A single window re-glaze is usually a short visit; a bathroom remodel scoped around keeping your ES unit runs a few weeks depending on tile and plumbing. We give you the real timetable in the written quote, not an optimistic one. Call (888) 578-4462 to schedule your free estimate and design consult.
We match the exact model and glass build from the stamp on your unit, then source an OEM replacement or a verified aftermarket match, and confirm fit before install. We don’t claim to stock ES parts or carry them on a truck; sourcing is done per job so it’s right the first time. Call (888) 578-4462 to start.
When your ES Windows bathroom project is ready, we also work with trusted partners like KraftMaid, Cambria, and Silestone for cabinetry and surfaces. Call Groundwork Construction Co. of Irvine at (888) 578-4462 for your free estimate. Upfront pricing, no surprises, and a 730-Day Done Right Promise on every job.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.