Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Home Additions & ADU: The Irvine Owner’s Guide
If your ES Windows-built addition or ADU has a failing component – a door that won’t seal, glass fogging between the panes, a window that’s drifted out of square – we install ES Windows-compatible replacements and glazing for Irvine homeowners, with installed home addition work running $45,000 – $130,000 and ADU construction $90,000 – $220,000 depending on scope and finish level. We’re an independent service provider, not affiliated with ES Windows, and we don’t claim to have an ES dealer relationship. Most Irvine owners find out something’s wrong the same way: a foggy pane they can’t see through, a patio door in the addition that sticks every summer, or a draft along the new wall they only feel once the marine layer rolls in.
That discovery almost always starts small. A dual-pane seal fails and the glass goes cloudy. A slider in the ADU starts catching on its track. Then it becomes obvious the addition’s envelope has a weak point, and it needs to be addressed before it spreads into the framing or the drywall.
Which ES Windows Models This Applies To
ES Windows made a wide range of aluminum and vinyl-framed products, and the framing changed across eras. Before anything gets ordered, we measure the rough opening, note the frame material and depth, and check the manufacturer’s label on the glass edge or the frame head for the series and date. That label is often the fastest way to match a compatible replacement for your specific ES Windows unit in an Irvine addition, because sizing specs shifted between product lines.
Here’s the model-specific part: ES Windows units installed during California’s Title 24 efficiency push used different glazing specs than earlier ones, so a “matching” window isn’t always a match on U-factor or SHGC. That’s a code question as much as a parts question. On a permitted Irvine addition, the new window or door has to hit current energy requirements, not just fit the hole.
OEM versus aftermarket: for glass units, a quality aftermarket insulated glass assembly matched to the right thickness and low-E coating is often the practical route when the original ES Windows part is discontinued. For the frame and hardware around it – rollers, locks, weatherstripping – we match what fits rather than forcing a brand-specific part that no longer exists.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Home Additions & ADU Is Failing
- Fogging or condensation between panes. The seal on the insulated glass unit has failed and moisture is trapped inside. It won’t clear, and the only fix is a new glass assembly.
- A door or window that sticks in summer and frees up when it cools. The addition has shifted slightly with heat, or the frame is out of square. Common in Irvine where sun exposure varies street to street.
- Drafts or water staining along the addition’s wall. Weatherstripping has flattened or a flashing detail around the new opening has started to fail. Small leaks here travel into framing fast.
- A slider that grinds or needs a lift to close. Failed rollers or a worn track. Cheap to ignore now, expensive once it damages the sill.
- Visible cracks in the glass or a loose pane. Impact or thermal stress. This one is a safety issue and shouldn’t wait.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for the ES Windows components on an Irvine addition or ADU lands mostly in line with our window and door work: window replacement runs $4,500 – $15,000 for a set, and impact-rated window installation runs $8,000 – $25,000 for a full project, with individual door and glass replacements priced within those bands. The full addition scope itself starts at $45,000 and can reach $130,000; a detached or attached ADU runs $90,000 – $220,000.
What drives the range: number of openings, whether you’re replacing a single glass unit or the whole frame, the energy code tier being met, and finish level. We quote parts and labor as a written line item so you see exactly what the ES Windows-compatible hardware and glass cost versus the install labor. Every project carries our 730-Day Done Right Promise – if it’s not done right, we make it right. The number you see is the number you pay.
DIY or Call Us?
There’s a safe half and an unsafe half. You can measure the rough opening, photograph the manufacturer’s label, clear a stuck track, and note where a draft comes from. What you shouldn’t tackle yourself is glass replacement, a full window or door swap, or anything involving a failed seal on a unit that’s part of your addition’s envelope – a bad install here means water intrusion into framing and drywall, and that gets expensive. Tall glass, second-story openings, and anything electrical on a powered unit are where it turns dangerous; that’s trained-professional territory.
Here’s where DIY goes wrong most often: a homeowner buys an aftermarket window that fits the hole but misses the energy spec, and the permitted Irvine addition doesn’t pass inspection. We pull the permits and stand behind the install. Call (888) 578-4462 for a free estimate – a live person answers around the clock.
FAQs
How long should ES Windows units in an Irvine addition last? Most insulated glass units give 10 – 20 years before a seal fails, and frames can last considerably longer with maintenance. Irvine’s coastal humidity and summer sun shorten the glass side of that. Call (888) 578-4462 for an exact assessment – estimates are free.
Can the part be repaired instead of replaced? Sometimes. Hardware, rollers, locks, and weatherstripping are usually repairable; fogged glass and cracked panes are replacement-only. We’ll tell you honestly which one you’re facing before quoting.
How long does the swap take? A single glass or hardware job is typically a short visit; a full window or door replacement on an addition usually takes a day per opening once the correct part is on site. Timing depends on lead time for the matched ES Windows-compatible unit.
How do you source the part? We measure, read the label, and match the glass or frame specs to what’s currently made – aftermarket where the original is discontinued, always to the current energy code for permitted Irvine work. No guessing on fit.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.