A Groundwork company - serving Irvine, CA
E

ES Windows Windows & Doors in Irvine, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Windows & Doors: The Irvine Owner’s Guide

We install ES Windows-compatible windows and doors throughout Irvine, and most full window replacement projects run $4,500 to $15,000 installed, with impact-rated units climbing to $8,000 to $25,000 when you need the whole-house package. Single failed units, hardware swaps, and sash repairs usually land in a single visit once we’ve matched the part. Our technicians have up to 12 years of experience tracing ES Windows profiles and sourcing the right match, and the work is backed by our 730-Day Done Right Promise. Groundwork Construction Co. of Irvine is an independent service provider, not affiliated with ES Windows.

Call (888) 578-4462

Owners in Irvine usually find the problem the same way: the window that used to glide now needs a palm to close, or a door starts scraping the sill by August. It creeps up on you. A draft in the family room in January becomes a whistle in March. The glass doesn’t fog, the frame looks fine, and yet something has clearly shifted.

Which ES Windows Models This Applies To

ES Windows builds vinyl and aluminum lines that show up in a lot of Irvine housing stock, particularly in newer builds around Great Park and Stonegate, and in mid-2000s townhomes near Woodbridge. The part that fails is different depending on the series. Sliding windows and patio sliders wear out rollers and roller tracks first. Casement and awning units fail at the operator arms, the hinges, and the weatherstripping. Hung windows go at the balance shoes and the sash pivot bars.

Before you order anything, find the manufacturer’s label. It’s usually etched on the glass in the top corner of the fixed pane, or printed on a silver sticker tucked in the head jamb or the sill pocket. Note the series, the glass date code, and the rough opening if you can get it. Measure the sash height and width to the nearest sixteenth of an inch and write down the frame depth. This is the part most Irvine owners get wrong: ES Windows used more than one roller and balance profile across its production lines, so a generic replacement from a big-box rack will often fit the track but ride wrong, bind on the jamb, or pop out under load.

On the OEM-versus-aftermarket question, our honest answer is that a quality aftermarket match is fine for rollers, weatherstripping, and screens. For operators, hinges, and balance assemblies on newer ES Windows units still in their original warranty window, OEM is the safer call because it preserves the original fit and keeps you from voiding coverage.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Windows & Doors Is Failing

Irvine sits in that dry, dusty inland climate zone where Santa Ana winds and hard summer sun do a number on window hardware, and the symptoms tend to show up in a predictable order:

  • The sash drags or won’t slide without force. That’s usually a flattened roller, a bent track, or a nylon roller that has gone brittle from UV exposure and heat cycling. Most Irvine sliders we see fail on the bottom track first.
  • You feel a draft or hear a whistle along the jamb. Worn or compressed weatherstripping and a shrunken sweep seal let air in, and it gets worse near exterior corners where the wind hits hardest.
  • The window won’t stay open, or slams shut. A broken balance spring or a snapped balance shoe in a hung window. Sometimes you’ll hear it snap before you notice the sash won’t hold.
  • A casement crank spins without moving the sash. The operator arm has stripped its gear teeth or the hinge has pulled loose from the frame. Common on west-facing units after several summers.
  • Water shows up on the interior sill after rain. Failed weep holes, a cracked glazing bead, or a worn sill sweep. Caught early this is a cheap fix; ignored, it becomes a drywall and framing problem.

Replacement Cost & What’s Included

Here’s what ES Windows window and door work actually runs in Irvine, installed:

Job Installed Price Range
Window replacement (full project) $4,500 – $15,000
Impact-rated window installation $8,000 – $25,000
Single sash or unit swap, parts and labor Quoted per unit after site measure
Hardware, roller, balance, or operator replacement Quoted per unit after site measure

The range is driven by unit count, glass type, whether we’re doing a full-frame replacement or a pocket install, and how many units need trim and stucco repair on the exterior. Every quote is written line by line so you see the part cost and the labor separately, and the number you see is the number you pay. No change orders halfway through. All work carries the 730-Day Done Right Promise, and we pull permits and coordinate inspections where the scope requires it.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely do a few things yourself. Clean and lubricate the tracks with a silicone spray, not oil. Swap out weatherstripping if it’s a simple peel-and-stick sweep on a slider. Inspect for cracked glazing bead and re-caulk where you see a gap. Those are homeowner tasks.

What you shouldn’t attempt is pulling a sash out of the frame to change a balance or an operator. Hung window balances are under real spring tension, and when they let go, they let go hard. There’s also a frameless glass or large fixed unit problem: those are heavy, and a dropped pane is a genuine injury risk. On top of that, buying the wrong profile from a home center and forcing it in can crack the frame or the glass, which turns a $60 part into a $600 unit. If you’ve gotten as far as “I think this is the balance” or “the crank is dead,” call (888) 578-4462 and we’ll match the part. Live person, 24/7.

FAQs

Ready to Price a Repair or Replacement in Irvine?

Call Groundwork Construction Co. of Irvine at (888) 578-4462 for a free estimate on your ES Windows windows and doors. We answer with a live person, 24/7, every estimate is written line by line with no surprises, and every job is covered by our 730-Day Done Right Promise. Windows & Doors is one of seven trades we run from foundation to finish line, alongside Kitchen Remodeling, Bathroom Remodeling, Roofing, Fence Installation, Driveway & Pavers, and Home Additions & ADU, with brand partners that include KraftMaid, Cambria, Silestone, Andersen, Pella, GAF, and James Hardie. From the first call to the final walkthrough, you’re working with background-checked, uniformed technicians and a number that doesn’t move.

Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch