A Groundwork company - serving Irvine, CA

GAF Driveway & Pavers in Irvine, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

GAF Driveway & Pavers: The Irvine Owner’s Guide

We install GAF-compatible driveway and paver systems across Irvine, and a full paver driveway typically runs $7,000 – $18,000 installed, with concrete driveway installation at $4,500 – $12,000. Most Irvine owners don’t discover a GAF system failure all at once. It starts with a section of pavers sitting a few millimeters proud of the rest after a winter of rain, or polymeric joint sand washing out toward the street during the first big storm of the season. Then a hairline crack opens along a driveway edge, or the base under a high-traffic apron starts to settle. That settling is almost always the real story: the pavers aren’t the problem, the compacted base beneath them is.

Call (888) 578-4462

Which GAF Models This Applies To

GAF’s driveway and paver lines are sold through a specific distribution network, and the model compatibility question matters most when you’re matching replacement units to an existing installation. GAF paver and segmental systems are specified by profile, thickness, and finish series, and the profile names printed on the original project paperwork (or on the GAF spec sheet left with the homeowner at installation) tell you exactly what you’re matching. If the paperwork is gone, we measure the paver face dimensions and the joint spacing directly. GAF’s standard segmental profiles run in the 60mm and 80mm thickness classes, and mismatching thickness between old and new units is the single most common compatibility failure we correct in Irvine. A 60mm paver laid next to 80mm stock won’t sit flush no matter how careful the base prep is. On the OEM-versus-aftermarket decision: GAF original units give you an exact finish and color match to the existing field. Quality aftermarket equivalents in the same thickness and face dimension will fit correctly and cost less, but the color and texture can drift slightly from what’s already on the ground. For a full field replacement, aftermarket in the same spec class is a reasonable call. For a repair patch next to existing GAF pavers, OEM is usually worth the premium. We’re an independent service provider and not affiliated with GAF.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your GAF Driveway & Paver System Is Failing

  • Polymeric joint sand washing out after rain. Water is finding a low spot in the base and running through the joints instead of sheeting off the surface. Left alone, the paver field starts to shift and the joints open wider each season.
  • Pavers sitting proud or sunken in patches. Localized base settlement, usually where the subgrade wasn’t compacted to spec or where tree roots are lifting a section. The pavers themselves are fine; the support under them isn’t.
  • Hairline cracks along driveway edges and aprons. Edge restraint failure or vehicle load on an under-supported perimeter. Irvine’s clay-heavy soils expand and contract through the wet-dry cycle, and edge restraint that wasn’t pinned deep enough will let the field creep outward over time.
  • Color fade and surface pitting on the paver faces. Normal wear plus UV exposure, accelerated where irrigation overspray hits the same section daily. Pitting that appears only in one zone usually means water is pooling there.
  • Efflorescence (white chalky film) that keeps returning. Moisture migrating up through the paver and evaporating at the surface. A one-time bloom after installation is normal; recurring efflorescence means water is getting into the base from somewhere it shouldn’t.

Replacement Cost & What’s Included

For Irvine, a full paver driveway installation runs $7,000 – $18,000, and driveway replacement (removing the old surface and rebuilding) runs $5,000 – $14,000. Concrete driveway installation lands at $4,500 – $12,000, asphalt paving at $3,500 – $9,000, and driveway sealing at $250 – $700. Those ranges move based on square footage, whether the existing base can be salvaged or has to be excavated and re-compacted, the paver profile and thickness you choose, edge restraint and drainage work, and site access for equipment. Every quote we give is a written line-item breakdown: what’s coming out, what’s going in, the base prep scope, and the labor. No-hassle upfront pricing means the number you see is the number you pay. The work is covered by our 730-Day Done Right Promise, and if it’s not done right, we make it right. We also handle paver patio installation in Irvine at $3,500 – $11,000 when the driveway project expands into the backyard.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

An owner can safely check a few things. Walk the driveway after a rain and mark where water pools. Measure the face and thickness of a loose paver so you know what profile you’re matching. Photograph the joint sand pattern before it washes further. What goes wrong in DIY territory is the base: pulling up a settled section and re-setting pavers on the existing subgrade without proper excavation and compaction just moves the failure a few months down the road. Plate compactors, edge restraint pinning, and getting the base material to spec are where most homeowner attempts stall out. If a section has shifted more than a few millimeters or the edge restraint has let go, that’s a base repair, not a paver swap. Call (888) 578-4462 and we’ll look at it with you and tell you honestly whether it’s a patch or a rebuild.

FAQs

Ready to Get Your Driveway Priced?

Groundwork Construction Co. of Irvine has served local communities since 2014, handles the full scope from foundation to finish line, and works with a curated set of trusted brand partners that includes GAF, Belgard, KraftMaid, Cambria, and Silestone. Our technicians bring up to 12 years of experience, and every crew arrives background-checked and in uniform. Calls are answered by a live person 24/7, so you’re never stuck in a voicemail loop. Right now we’re offering a free project estimate and design consult, 0% financing for 18 months, and $1,000 off projects over $10,000. Call (888) 578-4462 to schedule your free estimate on your Irvine driveway project.

Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch