Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Windows & Doors: The Irvine Owner’s Guide
If a GAF window or patio door in your Irvine home has fogged glass, a draft you can feel across the room, or a sash that won’t sit flush, we can help. Groundwork Construction Co. of Irvine installs and replaces GAF-compatible windows and doors, and most Irvine window replacement projects land between $4,500 and $15,000, while impact-rated installs run $8,000 to $25,000. GAF’s roots are in roofing, so the window and door products tied to the GAF name are typically specified through a builder or supplier rather than sold off a shelf. That’s why Irvine owners usually discover the problem the same way: a foggy pane in a north-facing bedroom, a door that swells and sticks after a Santa Ana heat spell, or a contractor who can’t match the unit because the label is gone. The good news is that matching the right unit is a measurement job, not a mystery.
Which GAF Models This Applies To
Before anyone orders parts, we identify what’s actually in the wall. GAF window and door units show up in Irvine homes under a few common identities: a GAF-branded label on the glass spacer or frame, a builder-series stamp from the original tract construction, or a supplier spec sheet left with the closing documents. The fastest way to sort this out is to find the manufacturer’s label, usually on the top or side of the sash or the door jamb, and photograph it before it fades further. That label gives you the series, the glass package, and often the original order date.
Here’s the compatibility gotcha most homeowners miss: GAF windows and doors are frequently built to a regional supplier’s spec, which means the rough opening and the frame profile can differ from the national catalog even when the label looks identical. A unit that measures 35 1/2 by 59 1/2 inches from one production run may not swap cleanly into an opening built for a 36 by 60. We measure the opening, not just the old unit, and we confirm the series before we quote. On the OEM-versus-aftermarket question: a genuine replacement sash or door panel keeps you locked to the original frame and glass package, which matters if you’re matching an existing elevation. A quality aftermarket unit, properly sized and rated, often costs less and performs the same or better in Irvine’s climate, especially when you’re upgrading to impact-rated glass. We’ll lay out both paths with real numbers so you can decide, and we’re upfront that we’re an independent installer, not affiliated with GAF.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Windows & Doors Is Failing
Windows and patio doors rarely fail all at once. They give you signals for months first. Here’s what Irvine owners report most often, and what’s actually going on underneath.
- Fog or condensation trapped between the panes. The sealed glass unit has lost its gas fill because the perimeter seal failed, usually after years of thermal cycling in direct afternoon sun. Once moisture is inside the unit, no amount of wiping fixes it.
- A draft you can feel with the back of your hand. Worn weatherstripping, a failed sweep on a sliding door, or a frame that has shifted out of square. In Irvine’s inland heat, door frames expand and contract enough to compress seals over time.
- The sash won’t close flush, or the door sticks in summer. Usually a hardware or alignment problem, sometimes a sign the frame itself has moved. A door that sticks only in August and swings free in January is telling you something.
- Water staining on the interior jamb or sill. Failed flashing or sealant at the exterior, not the window itself. This is the one that causes rot if it’s ignored through a rainy season.
- Glass that’s cracked, chipped, or no longer rated for impact. Older single-pane or non-rated units in Irvine homes are common, and a failed impact rating is a real concern during fire season and high-wind events.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Window and door pricing in Irvine comes down to unit size, glass package, and how many openings you’re doing at once. Here’s what we see on real projects, installed:
| Project | Installed Range (Irvine) |
|---|---|
| Window replacement (standard, multi-unit) | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
What drives the range: the glass package (impact-rated versus standard), frame material, whether the unit is a direct replacement or requires opening work, and the number of openings. A single foggy sash swap costs far less than a whole-elevation replacement. Our quotes are line-item and upfront, so you see the unit cost, the labor, and the disposal separately. Every install is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, which puts a full-house window project within reach for most Irvine budgets.
DIY or Call Us?
Some things you can check yourself, and some you shouldn’t touch. Safe to do: find and photograph the manufacturer’s label, measure the opening (not just the glass), feel for drafts around the perimeter, and check exterior sealant for cracks. What goes wrong on a DIY window or door job is almost never the glass itself; it’s the flashing, the shimming, and the square. A unit set even a quarter inch out of level will leak, stick, or both within a season, and by then you’ve paid for the unit twice. On sliding patio doors and larger units, the weight and the risk of a dropped panel make it a two-person professional job. We’d rather you call us for a free estimate than wrestle a 200-pound slider on a Saturday. Call (888) 578-4462 and we’ll walk you through what you’re looking at before you spend a dollar.
FAQs
A well-installed vinyl or aluminum window in Irvine typically lasts 20 to 30 years, and a sealed glass unit usually fails somewhere between 10 and 20 depending on sun exposure and how well the unit was installed. Inland Irvine homes that face west take more heat, so their seals tend to fail sooner than a shaded north-facing unit. If your units are past 15 years and you’re seeing fog, it’s worth having them looked at. Call (888) 578-4462 for a free assessment.
Yes, sometimes. If the frame and hardware are sound and only the sealed glass unit has failed, we can often replace just the glass unit rather than the whole window. That’s a real cost savings on a unit you’d otherwise replace entirely. It depends on whether the frame is still in good shape and whether the original glass spec is still available. We’ll tell you honestly which path makes sense for your Irvine home. Call (888) 578-4462 for a free estimate.
Most single window replacements are completed in a single visit, and a full-house project usually runs one to three days depending on the number of openings and whether any framing work is needed. We schedule around your day and clean up before we leave. Because we answer calls with a live person 24 hours a day, seven days a week, you can reach us when it’s convenient for you, not when it’s convenient for a voicemail box. Call (888) 578-4462 to get on the schedule.
We start with your label and your opening measurements, then match the series, glass package, and frame profile to what’s actually there. If the original spec is no longer produced, we identify a properly rated equivalent and show you the numbers before you commit. Our technicians have up to 12 years of experience with window and door work, and our brand partners include Andersen, Pella, and others alongside the materials we use in kitchens like KraftMaid, Cambria, and Silestone. We’re upfront: we’re an independent installer and not affiliated with GAF. Call (888) 578-4462 for a free estimate and we’ll do the matching for you.
Groundwork Construction Co. of Irvine has been in business since 2014 and serves homeowners across Irvine and the surrounding communities. We handle the full scope of a home improvement project, from windows and doors to roofing, kitchens, bathrooms, and additions, so you work with one contractor from foundation to finish line. Calls are answered by a live person 24/7, our technicians are background-checked and arrive in uniform, and our pricing is upfront with no surprises. For your free project estimate and design consult, call (888) 578-4462 today.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.