Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Fence Installation: The Irvine Owner’s Guide
IKO fence installation in Irvine typically runs $3,500 to $9,000 installed, and most residential fence runs are measured, permitted if required, and finished within a few working days. We install IKO-compatible fencing materials and match your existing product line so the new section blends with what’s already standing. Our technicians have up to 12 years of experience with wind-rated and HOA-compliant fencing throughout Irvine.
Owners usually figure out something’s wrong the same way: a gate that drags and won’t latch, a post that’s begun to lean after a windy spring, or a run of boards that has cupped and grayed while the rest of the fence still looks fine. In Irvine’s inland heat and clay soils, the failures show up in predictable spots, and the fix is usually a targeted section replacement rather than the whole perimeter. Upfront pricing means you’ll know that number before we touch a post.
Which IKO Models This Applies To
IKO fencing products cover the vinyl privacy, ornamental aluminum, and composite runs common on Irvine lots, and each line uses its own post spacing, rail profile, and hardware. The part-level details matter: a vinyl privacy panel sold for a 6-foot run with 8-foot post spacing won’t match a system built on 6-foot centers, and swapping rails between lines is where most mismatches happen. Before we quote anything, we measure the existing run post-to-post and confirm the rail and cap profile against the product label or a sample panel you can point to.
On the OEM-versus-aftermarket decision, IKO-branded components are worth matching when the surviving sections are in good shape and you want a clean visual seam. A quality aftermarket equivalent works well when the run is being replaced end to end, because nothing is left to mismatch. We source what fits your actual installation rather than pushing a brand over a spec. For Irvine properties under HOA review, we confirm the approved color and height first, since no parts swap fixes a board that the architectural committee won’t approve.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Fence Installation Is Failing
Fence failures in Irvine follow a pattern. Here’s what to look for and what’s actually going on underneath.
- Posts leaning after heavy rain or wind: the concrete footing has shifted or the post is sitting in soil that swells and shrinks seasonally. A post that pulls away at the base needs to be re-set, not straightened and braced.
- Gate sagging and dragging on the ground: hinges have loosened into the post or the gate frame has racked. Left alone, the drag wears the gate frame and eventually the latch won’t align at all.
- Boards cupped, warped, or splitting: sun exposure on the western and southern runs does this fastest. UV-damaged composite and vinyl both cup when the material reaches the end of its service life.
- Rails popping out of the post: the rail insert has worked loose or the post has spread. This is the earliest sign the run is under stress, and it’s worth checking the footing while it’s still a small job.
- Rust or corrosion on metal components: hinges, brackets, and post caps corrode faster on the coastal side of Irvine where salt air reaches inland properties. Staining and pitting mean the hardware is due for replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Irvine fence installation pricing depends mainly on linear footage, material, height, and site access. Here’s where the market sits:
- Vinyl fence installation: $3,500 to $9,000
- Aluminum fence installation: $4,000 to $10,000
What moves the number: total linear feet, whether the old fence and footings come out, grade changes along the run, and gate count. Steep or tight-access lots take longer and cost more to work around. What’s included in every quote: old fence removal, new posts and footings, panels, hardware, gate hanging, and cleanup. Parts and labor sit in the same line-item number so you can see exactly what you’re paying for. Every job carries the 730-Day Done Right Promise. If it’s not done right, we make it right. No-hassle upfront pricing means the number you see is the number you pay, and there’s $1,000 off projects over $10,000 plus 0% financing for 18 months available.
DIY or Call Us?
A homeowner can safely check a fence: walk the line after a rain and note where posts are loose, confirm post spacing, measure your gate opening, and read the product label on the back of a panel or under a post cap to identify the IKO line. That information makes the quote accurate.
The part that goes wrong is the deep work. Setting posts in Irvine’s clay requires footings below the frost line at the correct depth and width to hold long term, and a post set shallow will lean again within a season. Removing a failing post that’s already in concrete without damaging the run next to it takes the right tools. And gate alignment, once a post has shifted, is a structural fix rather than an adjustment. Our technicians have up to 12 years of experience and arrive background-checked and in uniform. Call (888) 578-4462 for a free estimate.
FAQs
How long does an IKO fence installation last in Irvine? A properly installed IKO fence on good footings typically lasts 15 to 20 years, with hardware and gate components needing replacement sooner. Irvine’s sun and seasonal soil movement are the main drivers, and footings set at the right depth are what separate a 20-year fence from a 7-year one. Call (888) 578-4462 for an exact assessment of your run.
Can the failing section be repaired instead of replaced? Yes, when the posts are sound and only a panel or a gate has failed, a targeted repair is the better call. If two or more posts in the run have shifted, replacing that section is more economical than chasing repairs. Call (888) 578-4462 and we’ll tell you plainly which it is.
How long does a section replacement take? A single failed section, gate, or run of panels is usually a one-day job once materials are on-site. A full perimeter replacement runs two to four working days depending on footage, removal, and access. Call (888) 578-4462 to schedule your free estimate.
How do you source the IKO part? We confirm your exact IKO line by profile and post spacing, then source the matching component through our brand partners. We don’t carry stock and don’t keep parts on a truck; each part is ordered to your installation. We also work with KraftMaid, Cambria, and Silestone on the interior side. Call (888) 578-4462 for a quote.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.