A Groundwork company - serving Irvine, CA

James Hardie Kitchen Remodeling in Irvine, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

James Hardie Kitchen Remodeling: The Irvine Owner’s Guide

James Hardie-compatible kitchen remodeling in Irvine runs $14,000 – $45,000 installed for a full kitchen, with cabinet-only scopes landing between $4,000 and $13,000. The fiber-cement product line that matters most in an Irvine kitchen is HardieBacker board, the substrate that carries tile backsplashes, floors and shower walls. Owners usually discover a failure the same way: a hollow thud behind a backsplash tile, a hairline crack that reappears after grout repair, or water staining along the countertop seam after a slow leak under the sink.

Call (888) 578-4462

Which James Hardie Models This Applies To

HardieBacker comes in 1/4-inch and 1/2-inch panels, in 3-by-5-foot and 4-by-8-foot sheets, and the thickness choice is where most Irvine installs go wrong. Floor tile over a wood subfloor needs 1/2-inch; wall and backsplash work typically takes 1/4-inch. The panel stamp matters. Look for the printed HardieBacker marking on the face and a date code at the edge – counterfeit or generic cement board often gets substituted by crews hunting a cheaper sheet, and it doesn’t carry the same compressive strength or moisture resistance.

There’s no OEM-vs-aftermarket decision here the way there is with a mechanical part. HardieBacker is a commodity sheet good, and the real question is whether your installer used genuine James Hardie product at the specified thickness versus a thinner generic board. If your failed substrate came out in crumbly chunks instead of breaking cleanly, that’s the tell.

Groundwork Construction Co. of Irvine is an independent service provider, not affiliated with James Hardie.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your James Hardie Kitchen Remodeling Is Failing

  • Tiles popping loose behind the backsplash. Usually a thin thinset layer over the board or a panel that flexed because it was fastened on 12-inch centers instead of the 8-inch pattern James Hardie specifies.
  • Grout cracks that keep coming back. Movement in the substrate, not bad grout. A 1/4-inch panel installed on a floor where 1/2-inch belonged will deflect underfoot and crack every joint above it.
  • Soft or swollen board edges near the sink and dishwasher. Long-term moisture wicking from a slow supply-line drip. HardieBacker handles vapor well but sitting water at an unprotected cut edge will still break it down.
  • Efflorescence or white powder at the base of a tiled wall. Moisture moving through the assembly. In Irvine we see this most in kitchens backing onto exterior stucco walls where the WRB was lapped wrong.
  • Hollow sound when you tap the wall. The panel has separated from framing or never bonded to the thinset. Tap across the tile field; a consistent hollow ring over a 2-foot area means the sheet is unbonded.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for the kitchen scopes that involve James Hardie substrate in Irvine:

Scope Installed Range
Kitchen remodel (full, substrate included) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

The range is driven by square footage of tile, whether cabinets and counters come out, and whether the wall behind the backsplash needs reframing. Our quotes are line-itemed: substrate, thinset, tile, labor, demo and disposal each get a number, so you see exactly what the James Hardie portion costs. Every job carries the 730-Day Done Right Promise, and the number you see is the number you pay.

DIY or Call Us?

You can safely check a few things yourself: tap the tile for hollow spots, look under the sink cabinet for staining, press a putty knife into any exposed board edge to test for softness, and photograph the panel stamp if you can see it. Reading the board is easy. Replacing it is where DIY goes sideways.

Cutting out bonded HardieBacker means removing tile, cutting a cement board that throws silica dust (a respirator is not optional), and re-establishing a flat, properly fastened substrate before any new tile goes down. A board that’s 1/8-inch proud of the surrounding field will telegraph through the new backsplash within a season. Call us at (888) 578-4462 for a free estimate and design consult – we’ll tell you honestly whether the substrate needs replacement or just the tile above it.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch