Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Driveway & Pavers: The Irvine Owner’s Guide
If a paver, driveway panel, or the aggregate base under your Mighty Buildings driveway has cracked, settled, or heaved, we install and repair Mighty Buildings-compatible driveway and paver systems across Irvine. Most paver driveway work runs $7,000 – $18,000 installed, and a concrete driveway replacement typically lands between $5,000 and $14,000 depending on slope, drainage, and square footage. Owners usually discover the problem the same way: a hairline crack in the driveway that widens over a dry Irvine summer, pavers that rock underfoot after winter rain, or a section near the garage slab that sinks a quarter inch and starts puddling.
We’re an independent service provider. We work with Mighty Buildings homeowners, we know how their exterior hardscape assemblies go together, and Groundwork Construction Co. of Irvine isn’t affiliated with Mighty Buildings itself.
Which Mighty Buildings Models This Applies To
Mighty Buildings builds panelized and 3D-printed accessory dwelling units and single-family homes, and the driveway and paver scope on those properties depends less on the model name than on the site package that shipped with it. What matters for parts matching is the exterior finish schedule attached to your unit: paver series and color, nominal size (common profiles run roughly 4×8, 6×6, and 6×9 inch units in thicknesses around 2⅜ inches), laying pattern (running bond, herringbone, or ashlar), and the sub-base spec – typically a compacted aggregate base of 4 to 6 inches over native soil in Irvine. Pull the as-built drawings or the hardscape schedule from your build documents before ordering anything. The label on the underside of an existing paver or the stamp on the concrete mix ticket is the surest identifier you’ll get.
On the OEM-versus-aftermarket question: Mighty Buildings paver lines are supplied through established hardscape manufacturers, and matching color and profile is entirely achievable through those channels. We don’t carry stock – we don’t claim to – and we won’t tell you a truck is loaded with your exact paver. What we do is source the correct series, confirm thickness and color lot, and handle substitutions in writing if a factory batch has been discontinued. That’s the honest version of the parts conversation.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Driveway & Pavers Is Failing
- Hairline cracks spreading across a poured concrete panel. Irvine’s shrink-swell clay soils flex seasonally, and a slab poured without proper control joints or rebar spacing will crack along the weakest line. Cracks wider than a credit card usually mean the base gave way, not just the surface.
- Pavers rocking or dipping underfoot. This is almost always base failure – the aggregate wasn’t compacted in lifts or the joint sand washed out. Rocking pavers left alone will chip at the edges within a season.
- Puddling near the garage slab or driveway apron. Poor slope or a settled panel directs water against the foundation, and in Irvine that means water finding a path into the unit’s base. Standing water after a rain is a slope problem that won’t fix itself.
- Joint sand eroding or weeds pushing through seams. Erosion lets the pavers shift laterally and lets moisture reach the base. A dry Southern California spring followed by winter rain is when this accelerates.
- Efflorescence or white staining on pavers. Salt migrating to the surface signals moisture trapped in the base layer. It’s cosmetic at first and a structural warning later.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Irvine, here’s what the work actually runs, installed:
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Driveway replacement: $5,000 – $14,000
- Driveway sealing: $250 – $700
- Paver patio installation: $3,500 – $11,000
What moves you up the range: square footage, paver series and color premium, demolition and haul-off of the old surface, sub-base depth needed over Irvine’s clay, and drainage corrections. What you get in the quote is line-item transparent – we give you the number up front and the number you see is the number you pay. Every job carries our 730-Day Done Right Promise: if it’s not done right, we make it right. No conditional fine print.
DIY or Call Us?
You can safely check a lot yourself: measure the driveway, photograph the failing section with a tape for scale, note whether pavers rock under foot, and confirm slope by watching where water pools after a rain. Pull your build documents and get the paver series and thickness on record.
Where DIY goes wrong is the part almost nobody enjoys hearing: replacing a driveway panel is heavy structural work with a genuine injury risk, from slab lifting to paver tamper operation to cutting with a wet saw. We’ll say it plainly – a driveway replacement isn’t a weekend project, and a poorly compacted base will fail you in one Irvine rainy season. That’s why we send background-checked, uniformed technicians and back the work in writing. Call (888) 578-4462 for a free estimate and a straight read on whether you need a repair or a full replacement.
FAQs
A properly installed paver driveway in Irvine should last 25 to 30 years, and a good poured concrete driveway 20 to 25 years – but base prep is the deciding factor. Irvine’s clay soil and seasonal moisture swings will shorten that lifespan considerably if the aggregate base was too thin or under-compacted. Call (888) 578-4462 and we’ll assess yours honestly.
Often yes. A single cracked panel, a few rocking pavers, or eroded joint sand can typically be repaired in isolation for a fraction of a full replacement. Structural base failure across the whole drive is the case where replacement is the more economical call. A free estimate tells you which side you’re on.
A repair or partial section replacement is usually a single-day job; a full paver or concrete driveway replacement generally runs 2 to 4 days depending on square footage, demolition, and base work. We schedule the work and give you a realistic timeline before we start – no surprise schedule slips.
We match your existing paver by series, profile, thickness, and color lot using your build documents and physical samples from the site, then source through the original hardscape manufacturer where possible. We don’t claim to carry stock – we confirm availability and pricing before you commit.
Groundwork Construction Co. of Irvine also installs and services KraftMaid, Cambria, and Silestone products across our other trades, so the same crew and the same standard carries into kitchens and baths if your project expands.
When your Mighty Buildings driveway needs a real fix, call (888) 578-4462 for a free project estimate and design consult. Live person, 24/7 – no voicemail, no delays. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, so a full driveway replacement is budgetable without a surprise. Upfront pricing, no surprises, backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.