Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Irvine Owner’s Guide
We install Oldcastle-compatible kitchen remodeling in Irvine, and most full kitchen projects here run $14,000 to $45,000 depending on cabinet layout, countertop material, and whether the island stays put or moves. Every job is quoted with upfront pricing so the number you see is the number you pay, and it’s all backed by our 730-Day Done Right Promise. Most Irvine owners discover something is wrong the morning a drawer no longer closes flush, a countertop seam starts collecting grit, or a cabinet face lifts away from the box after a humid stretch off the coast.
Those small failures almost always trace back to one worn component under stress: a hinge plate, a slide, a seam adhesive, or a substrate that swelled. We match the replacement to your exact Oldcastle build, not to whatever’s close on a shelf. Call (888) 578-4462 and a live person answers, any hour.
Which Oldcastle Models This Applies To
Oldcastle builds cabinetry and component lines across several series, and the part that fits one series will not fit another. Before you order anything, find the model label inside a cabinet door or on the back panel of a drawer box. It usually lists the series, cabinet width, and box depth. That label is the single most useful thing you can read off the cabinet, because Oldcastle changed hinge bore spacing and drawer slide mounting patterns between series generations, and a 32mm bore on one line does not line up on an older box.
The OEM-versus-aftermarket call is where Irvine owners lose time. OEM replacement hardware matches the original mounting exactly and keeps the cabinet’s factory alignment, but lead times run longer on discontinued series. Quality aftermarket slides and hinges (Blum and similar European-style equivalents) often fit with a plate swap and hold up better over the long haul. We quote both paths and tell you honestly which one makes sense for the cabinet you have. We’re an independent service provider and not affiliated with Oldcastle, so our loyalty is to the fit, not the logo.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Kitchen Remodeling Is Failing
- Doors that sag or rub the frame. The hinge cup screws have worked loose from the particleboard, which means the mounting holes have stripped and a longer screw won’t hold. The fix is a plate relocation or a fresh hinge mount.
- Drawers that stick or slide out crooked. The slide’s nylon rollers have flat-spotted or the rear mounting clip has fractured. You’ll hear the rattle before you see the sag.
- A countertop seam that opens or darkens. Seam adhesive has failed, letting moisture into the joint. In coastal Irvine humidity swings, that gap widens fastest over a dishwasher or sink run.
- Cabinet face or veneer lifting at the edges. A substrate that absorbed moisture is swelling. This is common on cabinets set near a poorly vented range or an under-sink cabinet with a slow drip.
- Soft or spongy cabinet bottoms. The under-sink base panel has water damage and has lost stiffness. Press near a corner: if it gives, the substrate needs replacing, not just resealing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Irvine kitchens, plan on these installed ranges. Each figure includes the part, labor, and cleanup, quoted upfront with no surprises once work starts.
| Item | Installed Price Range |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation / hardware refresh | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves with cabinet count, countertop material (Cambria quartz and Silestone sit at different price points than laminate), and whether the layout changes. We itemize parts and labor separately in the quote so you can see what the hardware costs versus the install. Where a refresh makes more sense than a full build, we say so. Everything carries the 730-Day Done Right Promise, plus 0% financing for 18 months and $1,000 off projects over $10,000.
DIY or Call Us?
You can safely check cabinet hardware yourself: open a door, look at the hinge cup, press on the cabinet bottom, and read the model label. Replacing a single drawer slide with a direct OEM match is within reach for a careful owner, and there’s no hazard in it. Where DIY goes wrong in kitchens is the countertop seam and any water-damaged substrate. Chasing a seam by adding adhesive over a moist joint traps the moisture and pushes the failure deeper. Swollen cabinet boxes need the base panel cut out and rebuilt, which means supporting the countertop above. We handle that work and stand behind it. If the damage goes past a hinge, call (888) 578-4462.
FAQs
Quality cabinet hardware typically holds up 10 to 15 years in normal use, and in Irvine’s coastal humidity, cabinet substrates that take on moisture can fail well before the hardware does. You’ll often see a drawer slide wear out before the wood does. Call (888) 578-4462 for a free estimate on replacement or repair.
Usually yes. Loose hinges, stripped mounting holes, and single failed slides are repairable without replacing the whole cabinet, and a countertop seam that’s still dry can often be re-bonded. Water-damaged cabinet boxes need more. We’ll tell you which one you’re facing before quoting.
A single hinge or slide swap is often done in one visit. A full hardware refresh across the kitchen or a countertop reinstall runs longer, and we give you the timeline in the upfront quote so there are no surprises. Call (888) 578-4462 to schedule a free estimate.
We start from your cabinet’s model label and series, then confirm mounting and bore spacing before ordering, choosing between OEM and verified aftermarket equivalents based on fit and lead time. We don’t guess from a photo. Call (888) 578-4462 with your model details and we’ll scope it out.
For a kitchen that outgrows the patch and needs the full build, we also work with KraftMaid, Cambria, and Silestone along with our Oldcastle-compatible work, from foundation to finish line. Ready to get a straight number on your Irvine kitchen? Call (888) 578-4462 for your free estimate and design consult, and a live person will pick up.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.