A Groundwork company - serving Irvine, CA

PGT Kitchen Remodeling in Irvine, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Kitchen Remodeling: The Irvine Owner’s Guide

PGT kitchen remodeling in Irvine typically runs $14,000 – $45,000 installed, and the price depends mostly on cabinet line, countertop material, and layout changes. We work with PGT-compatible products and also service KraftMaid, Cambria, and Silestone, so you’re not locked into one catalog. Most Irvine owners discover a failing PGT kitchen product the way everyone does: a soft spot by the sink, a drawer that stops gliding, or a cabinet door that won’t stay shut after three years of Irvine’s dry summers and cool marine mornings. We’re an independent service provider, not affiliated with PGT.

Call (888) 578-4462

Which PGT Models This Applies To

PGT makes products across several lines, and the model number is usually stamped inside a cabinet door, on the back of a drawer box, or on a sticker under the sink base. Photograph that label before you call anyone. The common gotcha: PGT’s cabinet hardware and hinge specs vary by production year, so a 2016-era soft-close hinge won’t drop into a 2019 box without swapping the mounting plate too. Measure door width, height, and overlay (the amount the door covers the face frame) before you order anything.

On the OEM-versus-aftermarket decision, here’s the honest split. For structural cabinet components, PGT OEM or a certified equivalent makes sense because the box tolerances are tight. For hinges, drawer slides, and shelf pins, quality aftermarket parts are usually better than the original and cost less. We don’t stock parts and we don’t carry inventory on a truck. We source the right component for your model, bring it to the job, and install it correctly the first time.

What fails first on PGT kitchens in Irvine

Irvine’s indoor humidity swings between roughly 30% in a Santa Ana wind week and 60%+ during marine layer months. That cycle is hard on particleboard cabinet boxes and soft-close hardware. We see hinge fatigue and drawer slide wear far more often than cabinet failures on the higher-end PGT lines.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Kitchen Remodeling Is Failing

  • Doors that drift open or won’t sit flush. The soft-close hinge spring has lost tension or the mounting plate screws have stripped out of the box. Both are repairable without replacing the door.
  • Drawers that stick or grind halfway out. The under-mount slide has worn its nylon rollers or debris has packed into the track. A slide swap usually solves it in under an hour per drawer.
  • Swelling or soft spots around the sink base and dishwasher. Water intrusion has reached the particleboard core. This one doesn’t get better with time; it spreads.
  • Loose countertop seams or a backsplash pulling away. Adhesive failure from heat cycling near the range. Caulk alone won’t fix it if the substrate has moved.
  • Cabinet doors that rub the frame in summer and clear in winter. Wood and composite doors expand with humidity. If the rub only appears June through September, you have a seasonal fit issue, not a broken part.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here are real Irvine numbers, calibrated to this market. Every quote we write is line-item, and the number you see is the number you pay.

Scope Installed Range (Irvine)
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: cabinet line and box material, countertop edge and slab selection, whether plumbing or electrical moves, and disposal of the old materials. Parts and labor are quoted separately so you can see what the component costs and what the install costs. Every project is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right.

DIY or Call Us?

Here’s the honest line. You can safely check and swap a drawer slide, tighten a hinge plate, replace a shelf pin, or re-caulk a backsplash seam. Those jobs need a screwdriver and thirty minutes. Where DIY goes wrong on a PGT kitchen: lifting or rehanging a full-height cabinet door alone (they’re heavier than they look and a dropped door cracks the face frame), cutting a countertop for a new sink, and touching any gas line behind the range. Gas is not a homeowner job. Neither is moving a cabinet that hides a shutoff valve you didn’t know was there.

We’re a licensed and insured contractor, and our technicians have up to 12 years of experience. Call (888) 578-4462 if you’d rather have it diagnosed once and done right.

FAQs

How long do PGT kitchen cabinets and hardware last?
Quality cabinet boxes last 20-plus years; soft-close hinges and drawer slides typically last 8 – 12 years in Irvine’s humidity cycle. The hardware is what wears first, not the cabinetry, so a hardware refresh often buys you another decade.

Can the part be repaired instead of replaced?
Often, yes. Hinges, slides, shelf pins, and door alignment are all repair jobs. Cabinet box swelling or a cracked face frame is a replacement. We diagnose before we quote, so you’re not paying for a full cabinet when you needed a $15 hinge.

How long does the swap take?
Hardware swaps run one to three hours. A single cabinet replacement is a half-day. A full kitchen remodel is two to six weeks depending on scope and permitting, and we give you the schedule in writing before we start.

How do you source the part?
We identify your PGT model from the label and specs, then source OEM or a quality equivalent through our supplier network. We don’t stock parts locally and we don’t promise a part is on a truck. We confirm availability before we schedule, so you’re not waiting on a maybe.

Ready to stop guessing? Call (888) 578-4462 to schedule your free estimate. Live person, 24/7. No voicemail, no delays. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months, and every project comes with the 730-Day Done Right Promise behind it.

Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch