A Groundwork company - serving Irvine, CA

Schluter Kitchen Remodeling in Irvine, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Kitchen Remodeling: The Irvine Owner’s Guide

Schluter kitchen remodeling in Irvine typically runs $14,000 to $45,000 installed, depending on tile scope, square footage, and whether the project includes a full tear-out or a refresh over sound substrate. Small kitchen projects fall between $9,000 and $20,000. We install Schluter-compatible systems in Irvine kitchens and can usually get a crew out the same week you call. Groundwork Construction Co. of Irvine is an independent installer, not affiliated with Schluter.

Call (888) 578-4462

Owners usually find a problem the same way: a hairline crack spreading across three or four grout lines, a hollow thud when they tap a tile near the sink, or a faint mildew smell coming from under the kitchen peninsula after a dishwasher leak. The tile itself is almost never the failure. It’s the system underneath it – the uncoupling membrane, the waterproofing layer, or the bonding flange at a shower or sink penetration – and that’s where the real diagnosis starts.

Which Schluter Models This Applies To

Schluter isn’t one part. It’s a family of tile installation systems, and knowing which one is under your kitchen floor changes how the repair gets scoped. The most common in Irvine kitchens are DITRA uncoupling membrane (the most common under floor tile), DITRA-HEAT for heated kitchen floors, KERDI waterproofing membrane (used behind backsplash and any wet penetration), KERDI-BOARD foam backer panels, and SCHIENE or JOLLY profile strips at exposed tile edges.

To identify what you have, pull a floor register or the vent by the toe kick and look at the edge of the tile assembly. DITRA reads as an orange plastic mesh mat roughly 1/8-inch thick with square dimples. KERDI is a flat orange fleece-backed sheet. DITRA-HEAT has the same orange dimples plus a visible matte-black heating cable woven through it. If you can’t see a cross-section, a small test cut under a cabinet toe kick usually tells you in five minutes.

On the OEM-versus-aftermarket question: for Schluter specifically, there is no true aftermarket equivalent for DITRA and KERDI that carries the same certification. Generic uncoupling membranes exist at half the price, but they don’t carry the same ANSI A118.10 waterproofing or A118.12 crack-isolation ratings, and using them can void a tile manufacturer’s warranty. The membrane itself is a small fraction of the total labor line, so the savings rarely justify the risk.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Kitchen Remodeling Is Failing

  • Hollow-sounding tile underfoot. Tapping a few tiles near the sink or dishwasher with a coin should sound solid. A dull “thunk” means the membrane has debonded from the substrate or the thinset under it has lost grip – often from migrational moisture pushing up through a concrete slab in Irvine’s older ranch homes.
  • Grout cracks in straight, repeating lines. Cracks that follow a consistent direction across three or more tiles usually mean deflection in the subfloor, not just a failed grout joint. DITRA is designed to absorb deflection up to a point – past that point, the membrane separates.
  • Mildew smell near the base of cabinets or the peninsula. That’s trapped moisture under a KERDI or DITRA layer that wasn’t properly sealed at a penetration. In Irvine’s dry climate, smells coming through a kitchen floor are almost always supply-line or dishwasher leaks, not humidity.
  • Loose tile at the base of a Schluter profile edge. SCHIENE and JOLLY profiles need full thinset coverage behind the anchoring leg. A tile that rocks or lifts along a counter edge or threshold usually points to a profile that was set with too little mortar.
  • A heating mat that trips a GFCI. DITRA-HEAT cable faults are usually caused by a nick during tile setting, not a cable defect. Tripping GFCIs should stop all use of the mat until it’s diagnosed.

Replacement Cost & What’s Included

Full kitchen remodel with a Schluter tile system in Irvine runs $14,000 to $45,000. A small kitchen refresh falls in the $9,000 to $20,000 band. Those numbers are installed, not just materials. For context on line items:

  • Backsplash installation: $800 to $2,500
  • Countertop installation: $2,000 to $6,500
  • Cabinet installation: $4,000 to $13,000
  • Kitchen island installation: $3,000 to $10,000

The range is driven by square footage of tile, whether the substrate is a slab or raised wood subfloor, whether old tile has to be demoed and hauled, and whether DITRA-HEAT is being installed as new construction. What’s included at our price: Schluter materials sourced at job-spec quantity, proper substrate prep, and every project covered by our 730-Day Done Right Promise – if the installation fails, we make it right, in writing. Our technicians have up to 12 years of experience.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some of this you can safely check yourself. Lift a floor register to confirm what membrane is installed. Tap a few square feet of tile with a coin. Look under the sink and dishwasher for signs of an active leak. Feel the floor near the perimeter of the room for soft or spongy spots.

Where DIY goes wrong: replacing a Schluter membrane is not a patching job. It requires demoing down to substrate, re-leveling, resetting thinset to Schluter’s specified coverage, and re-waterproofing any wet-area penetration. A patched membrane over a wet substrate will fail again – usually within a year – and DIY patching also voids whatever warranty the original install carried. If you don’t know whether you have DITRA or DITRA-HEAT, don’t pull up a tile to find out. Call our team at (888) 578-4462 and we’ll walk you through identification and give you a free estimate.

FAQs

Get a Free Estimate in Irvine

Whether you’re facing a single cracked tile or a full kitchen rebuild, the diagnosis has to come first. Groundwork Construction Co. of Irvine answers every call with a live person, 24/7, and every estimate is free with upfront pricing – the number you see is the number you pay. We’re running $1,000 off projects over $10,000 and 0% financing for 18 months on approved projects, and every kitchen we build is covered by our 730-Day Done Right Promise. Call (888) 578-4462 today to schedule your free estimate and get a straight answer on what’s under your tile.

Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch