A Groundwork company - serving Irvine, CA

Schluter Roofing in Irvine, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Roofing: The Irvine Owner’s Guide

Schluter makes the waterproofing and drainage layer that sits under your roof covering: the KERDI and DITRA-family membranes, the KERDI-DRAIN and KERDI-LINE drainage bodies, the KERDI-BOARD panels, and the Schluter-DITRA matting that a lot of Irvine roofers now spec on flat and low-slope sections, balconies, and deck-over-garage assemblies. If a Schluter layer under your roof has failed, we install Schluter-compatible roofing and membrane assemblies across Irvine, and a full membrane-and-covering repair on an Irvine roof typically lands in our roof repair range of $400 – $1,800 for localized work, with larger repairs quoted line-item after an on-site look. Most owners discover the problem the same way: a ceiling stain that appears weeks after the first winter rain, a soft spot over a flat roof section, or grout and tile lifting where a deck membrane was never flashed correctly.

Call (888) 578-4462

Which Schluter Models This Applies To

Schluter is not a roof shingle brand, and that trips people up. The products you’ll actually find on an Irvine roof or roof deck are the waterproofing pieces: KERDI (the sheet membrane, most often the 5-mil and 8-mil roll goods), KERDI-BAND for seams, KERDI-FLEX for movement joints, DITRA and DITRA-XL uncoupling matting under tile, KERDI-BOARD building panels, and the KERDI-DRAIN and KERDI-LINE linear drain bodies. The right part depends on where it sits: a deck-over-garage assembly wants uncoupling matting plus a bonded flange drain; a flat roof section wants membrane with properly lapped seams and a termination bar at the wall. Identify what you have by the printed roll edge (Schluter prints the product name and mil thickness along the membrane), the drain flange label, or a measurement of the drain body’s outside diameter. On the OEM-versus-aftermarket question: Schluter-compatible equivalents exist and often cost 20 – 35% less, but the drain bodies and flanges are where the compatibility gotchas live. A third-party flange that’s close but not matched to your Schluter drain body will not seal, and that’s a leak waiting for the first Irvine rain.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Roofing Is Failing

These are the symptoms we actually see in Irvine homes, and what each one usually means underneath:

  • Ceiling stains that show up days after rain, not during it. Water is traveling along the membrane or the roof deck before it finds a path through. That lag is the tell that a seam or a termination point failed, not the covering itself.
  • Grout cracking or tile lifting on a roof deck or balcony. The uncoupling layer underneath has lost bond or was never lapped correctly at the edge. When the matting moves, the finish above it moves with it.
  • Soft spots or a spongy feel over a flat section. Moisture has been sitting between the membrane and the deck long enough to compromise the substrate. This is the one that gets expensive if you wait.
  • Visible bubbling, wrinkling, or lifting at the membrane edge. Usually a termination bar that was fastened into the wrong substrate, or adhesive that didn’t cure in Irvine’s cool, damp mornings.
  • A musty smell in the garage or the room below. The membrane is holding water instead of shedding it. Odor shows up long after the leak started, which is why we treat it as a late-stage symptom.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Localized membrane and flashing repair in Irvine runs $400 – $1,800. A tile roof repair where the failure traces back to the underlayment or a deck assembly runs $600 – $2,500. If the deck assembly has to come apart and be rebuilt, that’s a roof replacement conversation, and Irvine roof replacements run $8,000 – $20,000 using GAF or CertainTeed systems where the covering warrants it.

What drives the range: how much membrane has to come out to reach a sound substrate, whether a drain body or flange needs replacing, and access. Flat roof sections and deck-over-garage assemblies take longer than a simple slope repair. You get a written line-item quote before anyone touches the roof, and the number you see is the number you pay. Every repair is covered by our 730-Day Done Right Promise. We’re an independent contractor and not affiliated with Schluter; we work with the products and install them to spec.

DIY or Call Us?

You can safely check some of this yourself. Look at the roll edge for the printed product name and thickness, photograph the drain flange, and note where the stain on your ceiling sits relative to the roof above it. That’s useful information and it saves time on the estimate.

Where it goes wrong: getting on a roof at all. Irvine roofs are pitched, and the flat and low-slope sections that carry these membranes are the slickest surfaces on the house, especially with morning marine layer still on them. Beyond the fall risk, membrane work is unforgiving. A lap that’s off by a quarter inch, a termination bar set into the wrong substrate, or adhesive applied outside its temperature window will look fine and leak for a year. We’ve pulled apart plenty of homeowner attempts where the materials were right and the sequence was wrong. If you’re unsure, call us at (888) 578-4462 and we’ll tell you honestly whether it’s a repair or a watch-and-wait.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch