Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The Irvine Owner’s Guide
Fence installation using Tamko building materials in Irvine typically runs $3,500 – $9,000 installed, depending on linear footage, height, gate count, and what’s being replaced. We repair and rebuild failing fence sections year-round, and most single-visit repairs can be scheduled within days – not weeks. To be clear about who we are: Groundwork Construction Co. of Irvine is an independent contractor and is not affiliated with Tamko.
Irvine owners usually discover the problem the same way. A winter storm pushes through, a post leans, a gate starts dragging across the concrete, or a run of boards that looked fine in October is warped and splitting by March. In neighborhoods like Woodbridge and Northwood, where HOA rules govern fence height, color, and material, a failing fence also becomes a compliance issue – letters start arriving. That’s usually the moment people call us.
Which Tamko Materials This Applies To
Tamko is best known for roofing and waterproofing, and they also make composite decking, railing, and some fence-adjacent products. So the first thing we do on any call is figure out exactly which product you have, because “Tamko fence” can mean a couple of different things. The fastest way to pin it down: check the original build or permit paperwork, look for a stamp or label on the back of a board or post, and measure the actual board dimensions.
A few practical realities we run into in Irvine:
- Composite products aren’t all interchangeable. Board thickness and tongue-and-groove profiles vary by line and year, and mixing them produces gaps that show.
- Color lots shift. Even within the same product line, ordering new boards to match a sun-faded run is unreliable. You’ll often get a closer match by replacing a full continuous section than by patching individual boards.
- OEM vs. aftermarket is a real decision. For structural pieces – posts, rails, hardware – we match specifications precisely rather than substituting on price. For non-structural boards, a quality equivalent can make sense and save money, and we’ll tell you honestly which is which.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Fence Installation Is Failing
- Posts leaning or rocking. Water has gotten into the footing or the post base has rotted. In Irvine’s clay-heavy soils, drainage around posts matters more than most people realize.
- Boards warping, cupping, or splitting. This is usually sun exposure plus moisture cycling, and it shows up first on south- and west-facing runs that take the most afternoon heat.
- Gates dragging or sagging. Almost always hinge hardware loosening or a post that’s shifted. A gate that drags is telling you the structure moved, not just the gate.
- Loose rails and wobbly panels. Fasteners have backed out or corroded. Left alone, the whole panel works loose.
- Visible rot, soft spots, or termite damage at the base. Termites are active in this climate, and the bottom foot of a fence is where they start. If a board crumbles when you press a screwdriver into it, the material is gone.
Replacement Cost & What’s Included
Installed fence work in Irvine runs $3,500 – $9,000 for typical residential projects. What drives the number:
- Linear footage and height – a standard run versus a tall privacy fence
- Post and footing conditions – replacing posts is more labor than replacing boards
- Gates – every gate adds hardware, alignment, and labor
- Material choice – composite runs higher than wood or vinyl for the same footage
- Removal and haul-away of the old fence
We give you a written line-item quote before any work starts: what’s being removed, what’s being replaced, material spec, labor, and disposal. The number you see is the number you pay. If we open something up and find a surprise – like a rotted post footing – we stop and tell you before we add anything. All fence work is covered by the 730-Day Done Right Promise, one of the longer workmanship guarantees in residential construction. If we build it and it fails, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s an honest split. You can safely check a few things yourself: walk the fence line and push on each post to find movement, press a screwdriver into the base of boards to test for rot, check hinge screws on gates, and note which sections face the most afternoon sun. That tells you how bad it is.
What we’d steer you away from: digging out and resetting posts on your own. Post footings need proper depth and drainage, and a post that’s set wrong will lean again within a season – which is exactly what we see on fences that were DIY’d in Irvine’s soil. And if a post is in rocky ground or near a utility line, call before you dig. We’re happy to be the second set of eyes. Call (888) 578-4462 for a free estimate and we’ll tell you what actually needs replacing versus what can wait.
FAQs
Plan on 15 – 20 years for wood fencing and 25+ years for composite or vinyl, though Irvine’s inland heat and sun exposure shorten that on west-facing runs. We see more premature failure from footing problems than from material wear. Call (888) 578-4462 for an exact quote – estimates are free.
Often, yes – if the posts are sound, individual boards and rails can be replaced section by section. Once multiple posts are moving, replacement usually costs less than repeated repairs. Call (888) 578-4462 and we’ll give you a straight answer on which is the better call.
A single repair section or gate fix is typically completed in a single visit. A full fence replacement usually takes a few days depending on footage and gate count. We confirm the schedule in writing before we start. Call (888) 578-4462 for a free estimate.
We identify your existing product line and spec first, then source matching materials through our verified brand partners so dimensions and profiles line up. We don’t claim to carry parts on hand – we order what your specific fence requires, and we tell you upfront when a quality equivalent is the smarter buy. Call (888) 578-4462 to get started.
If you’re planning a larger project alongside fence work, we also install and service KraftMaid cabinetry, Cambria and Silestone countertops, and every other trade under one roof – from foundation to finish line, with one contractor and one written guarantee.
Get a Free Estimate
Whether you’ve got one sagging gate or a full fence that’s reached the end of its run, we’ll look at it, tell you what genuinely needs replacing, and put a written number in front of you with no surprises. Our technicians have up to 12 years of experience, and every project is backed by our 730-Day Done Right Promise. Calls are answered by a live person, 24/7 – no voicemail, no waiting until Monday. Call (888) 578-4462 today to schedule your free estimate and design consult, and ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.