Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Driveway & Pavers: The Irvine Owner’s Guide
If you’re pairing a Therma-Tru entry door system with a driveway or paver surface in Irvine, we handle both the door-side hardware and the hardscape that ties the front of your home together. Paver driveway installation in Irvine typically runs $7,000 – $18,000, and we can usually schedule a free estimate within a couple of days. Therma-Tru is a door and entryway brand, so on hardscape projects the Therma-Tru element is almost always a threshold, sill pan, or entry landing detail that has to shed water correctly against the pavers. Owners usually notice the failure as a damp spot inside the door after rain, a soft or settled paver right at the threshold, or a thin crack working its way out from the door frame into the driveway surface.
Which Therma-Tru Models This Applies To
Therma-Tru builds fiberglass and steel entry doors across several product lines – Classic Craft, Fiber-Classic, Smooth-Star, and the higher-end Signet and Pulse series. Each line uses its own threshold geometry: Fiber-Classic and Smooth-Star doors commonly sit on adjustable aluminum or composite sills in the 4-9/16″ to 6-9/16″ jamb range, while Signet and premium lines often use low-profile sills built for flush or near-flush stone and paver transitions. Get the sill height wrong and the pavers hold water against the frame.
To identify your setup, open the door and look for the sticker on the hinge jamb or the top of the door slab – the Therma-Tru model code and fire label sit there on most units. Measure the rough opening width and the sill-to-finish-floor height; those two numbers tell us which threshold and landing assembly your Irvine hardscape needs to meet. On OEM versus aftermarket: Therma-Tru replacement sills are worth sourcing when you’re within roughly 15 years of the door’s install, since aftermarket thresholds rarely match the original sill angle and weep-hole pattern. For pavers and hardscape material we don’t chase OEM at all – we source from Belgard-grade manufacturers whose thickness and compressive specs we verify against your door’s sill height.
Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Driveway & Pavers Is Failing
The failure usually shows up where the entry system and the hardscape meet. These are the symptoms we see most in Irvine:
- Water pooling at the threshold after rain. The sill is sitting below the paver surface or the landing pitch runs toward the door instead of away. Irvine’s infrequent but heavy winter storms expose this fast.
- Soft, settled, or rocking pavers at the entry landing. Base compaction under the landing was shallow to begin with, and a decade of foot traffic plus irrigation runoff hollows it out.
- A hairline crack radiating from the door frame into the driveway. Typical of concrete aprons or a poured transition strip moving independently of the paver field when the sub-base wasn’t tied in.
- Weep holes in the Therma-Tru sill draining onto pavers that can’t move the water. The door is doing its job; the hardscape directly below is trapping moisture against the frame instead of grading it away.
- Efflorescence or persistent damp patches on pavers at the door. Moisture is wicking up through a base layer that never fully drains, which is common on Irvine lots with heavy clay under the topsoil.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s where the numbers land for Irvine, with parts and labor listed together because that’s how we quote:
| Work | Installed Range (Irvine) |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Paver entry landing / threshold reset | quoted as part of the driveway scope |
| Driveway sealing | $250 – $700 |
What drives the range: total square footage, whether the existing surface has to be demoed and hauled, sub-base depth and compaction, drainage correction, and paver selection. A Therma-Tru threshold reset or sill-pan correction is folded into the driveway scope rather than priced as a separate line. You get a written line-item quote before we start, no change orders after. Every job carries our 730-Day Done Right Promise – if it’s not done right, we make it right. And there’s no-hassle upfront pricing: the number you see is the number you pay.
DIY or Call Us?
What you can safely check yourself: open and close the Therma-Tru door to confirm the sill isn’t binding, run a hose at the base of the door and watch where the water goes, and press down on pavers right at the entry landing to feel for hollow spots. If water runs back toward the threshold or a paver rocks, you’ve found your problem.
Where DIY goes wrong: resetting a paver landing means removing the pavers, re-excavating the base, recompacting in lifts, and re-grading the pitch so it drains away from your Therma-Tru sill – all without disturbing the door frame or the sill pan. Homeowners who skip the compaction or the grading step are back to pooling water within a season. This isn’t a dangerous job, but it’s a fussy one. Call (888) 578-4462 and we’ll take a look – our technicians have up to 12 years of experience on hardscape and entryway work like this in Irvine.
FAQs
How long does a paver driveway with an entry landing last in Irvine? A properly installed paver driveway lasts 25 to 50 years, and the entry landing at a Therma-Tru door is usually the first section to need attention at the 10 to 15 year mark if the base wasn’t deep enough. Irvine’s clay-heavy soil and seasonal irrigation make drainage the deciding factor, not the paver itself. Call (888) 578-4462 for an inspection and a free estimate.
Can the entry landing be repaired instead of replacing the whole driveway? Yes, most of the time. If the pavers themselves are sound and only the landing or the transition at the Therma-Tru threshold has settled, we lift, re-base, and re-lay that section and re-grade it to drain away from the sill. Full replacement only comes up when the base under the main field is failing. Call (888) 578-4462 to find out which one you’re looking at.
How long does the swap take? An entry landing reset is typically a one to two day job. A full paver driveway installation in Irvine runs three to five days depending on square footage, demo, and whether drainage corrections are needed. We give you the schedule in writing before we start.
How do you source the part? Therma-Tru thresholds and sill components come through authorized door and entryway suppliers, and we match them to your model code before ordering. Pavers and base materials come from manufacturers whose thickness and compressive strength we verify against your door’s sill height. We don’t stock parts and we don’t carry inventory on a truck – everything is sourced to your specific project. We also work with KraftMaid, Cambria, and Silestone on the interior side of Irvine homes, but for this job it’s the hardscape and entryway suppliers that matter.
Will the price change once work starts? No. Our upfront pricing means the written quote is what you pay. If we open up the base and find something that genuinely changes the scope, we stop and talk to you before we touch it – no surprise line items after the fact.
Whether your entry landing has settled against a Therma-Tru sill or you’re ready to replace a worn driveway outright, we’ll walk your Irvine property, tell you honestly what needs fixing, and put a line-item number in writing. We’re a full-scope partner from foundation to finish line, backed by the 730-Day Done Right Promise, and our calls are answered by a live person 24/7. Call Groundwork Construction Co. of Irvine at (888) 578-4462 for a free estimate.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.