Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The Irvine Owner’s Guide
Tremron paver driveways in Irvine typically run $7,000 – $18,000 installed, depending on square footage, base prep, and which Tremron series you choose. We install Tremron-compatible driveway and paver systems across Irvine, and we can usually get an accurate quote to you without a second visit. Most owners discover a problem the same way: a paver the tires keep catching, sand washing out along the apron after a Santa Ana wind event, or hairline cracks spreading across the driveway after a hot August. Tremron makes a genuinely good product. The failure is almost always underneath it – base, drainage, or installation – not the stone itself.
Which Tremron Models This Applies To
Tremron manufactures several paver lines common on Irvine driveways. Oldcastle and Tremron’s Signature series, the Stonegate collection, and their larger-format slab pavers all show up in tracts built across Woodbridge, Northwood, and the newer villages around Great Park. Compatibility matters most when you’re matching an existing field, not repairing a “part” in the traditional sense. Paver color lots shift batch to batch, so a replacement run from a different production lot will read as a slightly different shade in Irvine’s hard afternoon sun even if it’s the exact same SKU.
How to identify what you have: pull one loose paver from a low-visibility edge, flip it, and look for the stamped Tremron mark and any series code on the underside. Measure the face length, width, and thickness – Tremron’s standard pavers and their larger slabs differ enough that guessing wastes a trip. Also check whether the driveway was laid in a running bond or herringbone pattern; that determines what a repair course looks like.
On the OEM-versus-aftermarket question: for pavers, there’s no real aftermarket equivalent in the way there is for a car part. You’re matching a specific Tremron series and a specific color lot. Where “equivalent” enters is base material and joint sand – a quality polymeric sand is the right call regardless of who made the paver. Groundwork Construction Co. of Irvine is an independent installer and is not affiliated with Tremron; we work with their product because it holds up in Irvine’s climate, not because of any dealer relationship.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Driveway & Pavers Is Failing
- Sand washing out of the joints after rain. Joint sand loss points to drainage running across the surface instead of off it – often a grading or slope problem, not the sand’s fault. Irvine’s clay-heavy soil under many older driveways holds water and pushes it up through the joints.
- Pavers rocking or settling unevenly. A single rocker usually means a failed base course or a void under that paver. If several are loose in one zone, the base compaction was likely inadequate from the start.
- Hairline cracks in the pavers themselves. Tremron pavers are dense concrete and don’t crack easily. When they do, it’s usually point-loading from a heavy vehicle on an unsupported paver, or freeze-adjacent thermal cycling in Irvine’s cool winter nights after hot days.
- Efflorescence – the white chalky haze. That’s mineral salt migrating to the surface, common in Irvine’s marine-influenced air. It’s cosmetic in most cases, but persistent efflorescence signals moisture trapped in the base.
- Heaving or a humped section near the garage apron or street transition. Tree roots, poor edge restraint, or a base that wasn’t dug deep enough. This is the one that most often drives a full tear-out and re-lay rather than a spot repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Irvine, paver driveway installation runs $7,000 – $18,000. A full driveway replacement – tear-out, haul-away, new base, edge restraint, and re-lay – typically lands $5,000 – $14,000 for the replacement scope alone, with the paver material added on top. Paver patio installation is $3,500 – $11,000. Driveway sealing, which is maintenance rather than repair, runs $250 – $700 and is worth doing every few years in Irvine’s sun.
What drives the range: square footage, how much base excavation is needed, whether old concrete or asphalt has to be broken out and hauled, drainage correction, and which Tremron series you pick. Our quotes are line-item and fixed – the number you see is the number you pay, with no change orders mid-job. Every driveway and paver we install is covered by the 730-Day Done Right Promise, and our technicians have up to 12 years of experience on hardscape installs. We also handle kitchen and bath work with the same crew standards, using KraftMaid, Cambria, and Silestone where those come up.
DIY or Call Us?
Spot repairs are within reach for a careful homeowner. Pulling and re-setting a single loose paver with fresh base material and polymeric sand is a weekend task, and re-sanding joints is straightforward. What goes wrong fast: assuming a rocker is just a bad paver when the real problem is six inches of failed base underneath, or re-setting a paver on top of wet clay without correcting drainage. That repair fails within a season and takes the neighboring pavers with it.
There’s no genuine safety hazard in paver work the way there is with a garage door spring – no high-tension component, no live electrical. The risk is a bad repair that costs more to fix than it would have to do right the first time. For anything beyond a single paver or a re-sand, call us at (888) 578-4462 and we’ll give you a straight read on whether it’s a repair or a re-lay.
FAQs
Tremron pavers themselves will hold 25 to 30 years or more with normal use; the pavers rarely fail. What determines real-world lifespan in Irvine is the base and the drainage under them – a well-built base can carry the pavers for decades, while a poorly compacted base starts showing rockers and settling within five to seven years. Call (888) 578-4462 for a look at your specific driveway.
Yes, in most cases. Individual pavers can be pulled, the base corrected underneath, and the paver re-set with fresh polymeric sand – no need to redo the whole driveway. Repair makes sense when the failure is isolated. When the problem is widespread settling or a failed base across the whole run, a partial repair just kicks the cost down the road. We’ll tell you which one you’re looking at.
A single-paver repair or joint re-sand is typically done in a single visit. A full driveway installation runs several days – base excavation and compaction, edge restraint, laying, cutting, and sanding – with the exact timeline set by square footage and how much old surface has to be removed. Schedule your free estimate at (888) 578-4462 and we’ll give you a real timeline, not a guess.
We identify your series and color from the paver itself, then source from Tremron’s current production for that series. The honest caveat: color lots shift between production runs, so a repair patch from a new lot can read slightly different from a ten-year-old field. Where a close match matters, we blend new pavers into the least visible area first. Call (888) 578-4462 to talk through your match.
Whether you’re patching one loose paver or rethinking the whole driveway, the first step is a real number. Call Groundwork Construction Co. of Irvine at (888) 578-4462 for a free estimate – upfront pricing, a live person on the line, and work backed in writing by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.