A Groundwork company - serving Irvine, CA

Unilock Roofing in Irvine, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Roofing: The Irvine Owner’s Guide

Unilock is a hardscape and segmental retaining wall brand, so the “Unilock roofing” question in Irvine almost always comes from an owner with a Unilock paver roof system, a Unilock-capped parapet or trim detail, or a paver-to-shingle transition where a cap, edge restraint, or flashing component has failed. Replacing that failed piece as part of a repair runs $400 – $1,800 for a localized fix and $8,000 – $20,000 when the failure has spread into a full roof replacement. Older Irvine roofs are typically discovered mid-rain, when a stain blooms on a ceiling in Northwood or a piece of cap edging drops into a planter in Turtle Rock.

Call (888) 578-4462

What follows is the honest version: which pieces actually exist, what fails first in Irvine’s sun and marine air, and what a real repair costs before you sign anything.

Which Unilock Models This Applies To

Unilock makes segmental paving, wall block, and edging products, not a shingle or tile roofing line. That means there is no single “Unilock roofing part number” to look up. What Irvine owners are usually hunting is one of three things, and each has a different sourcing path.

  • A paver roof or paver-capped parapet: the pieces are Unilock paving units (Brussels Block, Beacon Hill, and similar profiles) set on a waterproof membrane. Match by unit dimensions and thickness, not by name alone, because Unilock has retired and revised profiles over the years.
  • Edge restraint and trim: Unilock’s edge restraint products have specific profiles and heights. A generic paver edge from a box store often won’t seat the same way against a membrane or fascia detail.
  • Flashing and counterflashing at the transition: this is metal, not Unilock, but it’s where the leak usually starts. The paver above it just gets blamed.

To identify what you have, measure the length, width, and thickness of the unit in millimeters and photograph the profile from the end. A caliper and a phone photo settle the OEM-vs-aftermarket question in about five minutes. On these systems, a correct-profile aftermarket unit of matching thickness is fine structurally; what matters is the bedding and the membrane under it, not the badge on the block.

One compatibility gotcha worth stating plainly: Unilock has changed the dimensions on some of its block profiles over the years, so a “same name” replacement pulled from current stock can sit a few millimeters off the original and telegraph a lip at the joint. Measure your existing units before ordering anything.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Roofing Is Failing

In Irvine, these systems fail from sun and thermal cycling more than from rain. UV degrades sealants and bedding long before water finds the gap.

  • Interior ceiling or wall stains after rain: water is tracking under the paver field and through a membrane breach or failed flashing. The stain location is rarely directly under the breach.
  • Loose, rocking, or displaced units: bedding has broken down or a fastener has backed out. Rocking units grind the membrane below them with every temperature swing.
  • Visible gaps at edges, caps, or the parapet: edge restraint or sealant has failed. This is the most common entry point on Irvine roofs and the easiest to catch early.
  • Granule loss or surface spalling on the units: UV and age are breaking down the surface, and the unit is now holding water instead of shedding it.
  • Moss, dark streaking, or efflorescence that keeps returning: moisture is sitting where it shouldn’t, usually a drainage or slope problem upstream of the visible symptom.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A localized Unilock-compatible roof repair in Irvine runs $400 – $1,800, and a tile roof repair of the same scope runs $600 – $2,500. If the failure has reached the membrane or spread across the field, a full roof replacement runs $8,000 – $20,000, and a metal roof installation starts at $15,000 – $40,000.

Scope Installed Price Range
Roof repair (localized) $400 – $1,800
Tile roof repair $600 – $2,500
Roof replacement $8,000 – $20,000
Metal roof installation $15,000 – $40,000

What drives the range: how much membrane is exposed once the failed units come up, whether flashing needs to be remade, roof pitch and access, and whether matching units are still available. Our written estimate breaks out parts, labor, and any membrane work as separate line items. The number you see is the number you pay. Every repair carries our 730-Day Done Right Promise on the workmanship, so if a repair fails inside that window, we come back and make it right.

DIY or Call Us?

An owner can safely do two things: photograph and measure the failed unit, and check for loose pieces from the ground with binoculars. Both help us price the job accurately before anyone gets on the roof.

Roof work is where DIY goes wrong. Irvine roofs are steep and hot, and the real danger isn’t the paver repair itself, it’s the fall and the membrane damage. Lifting a paver to look underneath can tear a membrane that was still watertight, and re-bedding a unit wrong can trap water in a spot that stays hidden until the next storm. A capped edge or parapet detail also has to be tied in correctly, and that’s a membrane-and-flashing job, not a block job. Call (888) 578-4462 and we’ll walk you through what you’re seeing before you climb anything.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch