Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Midway City, CA: What to Expect
New cabinets and countertops in Midway City usually run $14,000 to $45,000 for a full kitchen package, and most jobs take three to five weeks from demo to final caulk. You’re looking at roughly one week for cabinet install, a few days of countertop templating and fabrication, then a day for the countertop set and a day for backsplash trim-out. Call (888) 578-4462 and we’ll walk your kitchen and put a real number on it, free.
How We Run a Cabinet and Countertop Job in Midway City
Every kitchen we do in Midway City follows the same five stages. What changes is how much prep your particular 1950s ranch needs once the old boxes come out.
Stage 1: Measure, templating plan, and material lock-in (1 – 2 days)
We measure every wall, check for out-of-square corners, and note where the floor dips. On Midway City homes that dip is common, so we plan for shims and a possible floor patch before a single cabinet gets ordered. You decide cabinet door style, finish, and box construction grade here, plus countertop material. Lead time on semi-custom cabinets is typically three to five weeks, so this decision sets the whole schedule.
Stage 2: Demo and tear-out (1 – 2 days)
Old cabinets, countertops, and backsplash come out. We shut off water and gas at the fixtures and cap lines. This is the day we find out what’s behind the wall: old galvanized supply lines, a receptacle without a box, or a vent stack in the wrong spot. We photograph everything and send it to you the same day so there’s no mystery later.
Stage 3: Rough-in and wall prep (2 – 3 days)
If we’re moving the sink, adding a dishwasher, or adding outlets for a microwave hood, the electrical and plumbing rough-in happens now. Drywall gets patched, corners get squared, and the floor gets leveled where the cabinets will sit. You decide appliance specs at this stage, because a slide-in range and a freestanding range need different cabinet clearances.
Stage 4: Cabinet installation (3 – 5 days)
Base cabinets set first, leveled and shimmed, then uppers hung to a laser line. Crown and light rail go on after. We set the cabinet boxes plumb even when the wall isn’t, and that’s most of the reason a finished kitchen looks right. You confirm hardware placement here, and this is when pulls and knobs get drilled. Semi-custom KraftMaid cabinetry fits this stage well because the fillers and moldings are sized to the actual opening.
Stage 5: Countertop template, fabrication, and set (5 – 10 days total)
We template the counters after the cabinets are in, which is the only way to get a tight seam. Fabrication takes five to seven business days for most stone. The set day is one day: counters, sink, faucet, and sealant. Then a half-day for backsplash trim and a walkthrough. If you’re replacing the whole kitchen rather than just the boxes and counters, that’s a bigger scope and you’ll want our Kitchen Remodeling in Midway City page for the full picture.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Cabinet boxes: stock vs. semi-custom. Stock cabinets are cheaper and ship fast, but they come in fixed widths, and a Midway City kitchen with a 50-foot lot width rarely has a straight 24-inch run. Semi-custom is the practical pick here because you can order the filler and the odd-size box you actually need.
- Door style and finish. Painted shaker holds up well and looks at home in a mid-century ranch. Thermofoil is the budget option but it peels at the edges in a hot kitchen. Real wood veneer needs more care but ages gracefully.
- Countertop material. Quartz is the default for good reason: no sealing, consistent pattern, and it handles heat better than laminate. Granite costs similar and gives a one-of-a-kind look but needs sealing once a year. Butcher block is warm and repairable but needs oiling and doesn’t like a wet sink area.
- Edge profile and thickness. A standard eased edge is included in most quotes. A thick mitered edge on an island reads as high-end and adds cost on the stone side.
- Hardware and drawer boxes. Soft-close and full-extension drawers are worth the upgrade. It’s the difference between a cabinet that lasts ten years and one that lasts twenty.
We keep curated brand partners on the material side so you’re choosing quality, not whatever’s in stock. If your scope grows into the wider project, our Kitchen Remodeling service covers the full trade stack.
What Cabinets & Countertops Costs in Midway City, CA
The full package lands between $14,000 and $45,000. Here’s how the line items break down for a typical Midway City kitchen:
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash trim: $800 – $2,500
- Island if you’re adding one: $3,000 – $10,000
Five things push you toward the high end. Kitchen size and cabinet count is the biggest lever. Moving the sink or range to a new wall means plumbing and electrical rough-in, which adds days and dollars. Material grade, especially quartz vs. a budget laminate, swings the counter budget by thousands. Out-of-square walls and dip in the floor on an older Midway City ranch mean more prep time. And if your project triggers a panel upgrade or a permit for structural work, that’s a separate line.
Your written estimate lists cabinet brand and box spec, counter material and edge, sink and faucet, demo and haul-away, and permit costs. It won’t include appliance purchase, and it won’t include surprises we can’t see until demo, which is why we photograph and price anything found behind the wall before we proceed. Upfront pricing, no surprises, is the whole point.
See the difference
Before
After
Before
After
Before
AfterWhat Midway City Homes Do to This Job
Midway City is a small, landlocked unincorporated slice of Orange County in ZIP 92655, and that shapes the work in ways you don’t see two miles away. There’s almost no vacant land, so most of what we touch is a teardown rebuild, a second-story addition, or an ADU conversion on a tightly packed 1950s lot. Permits run through the County of Orange building department rather than a city office, which changes plan-check timing and how we schedule inspections. On a narrow original street with no alley access, getting materials in and debris out means planning the delivery window, not winging it.
The housing stock explains most of what we find behind the cabinets. These are small post-WWII single-story ranches on 5,000 to 6,000 square foot lots, many with original stucco, single-pane aluminum windows, and older electrical panels. Pull the boxes and you’ll often find no dedicated circuit for the microwave and a receptacle or two that fails a code check. That’s normal here, and it’s why we scope the electrical rough-in before we order cabinets. On the positive side, the coastal-adjacent basin means no freeze days to worry about, so cabinet install and countertop cure schedules stay predictable year-round. Santa Ana wind events do kick up dust during demo, so we seal off the rest of the house and run negative air on tear-out days.
We work all over Midway City, from Bolsa Avenue and Hazard Avenue down through the interior streets where concrete and material trucks have to stage off-peak. If you’re also planning a bath project, homeowners often pair this with Walk-In Showers & Shower Remodeling in Midway City or a Tub-to-Shower Conversion in Midway City to keep one crew on site. You can see everywhere we cover on the Midway City service-area page.
Serving Midway City, CA – Our Local Coverage Area
We serve Midway City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Midway City
Plan on three to five weeks from demo to final walkthrough, with the biggest variable being cabinet lead time. Semi-custom cabinets typically take three to five weeks to arrive, so the clock starts the day you sign off on the door style. Install itself is about a week for cabinets plus a few days for countertops. Call (888) 578-4462 for a schedule built around your specific kitchen.
Straight swap of cabinets and counters in the same footprint usually doesn’t need a permit, but moving plumbing, adding circuits, or knocking out a wall does. Because Midway City is unincorporated and permits go through the County of Orange, the scope of your permit matters. We tell you upfront which parts of your job will pull one, and we handle the paperwork. Call us for a free scope review.
Yes, and that’s the most common job we do in Midway City. Keeping the sink and range in place keeps the price closer to the $14,000 end of the range. Moving either one means rough-in work and adds cost. Ask us for both versions of the quote so you can see the difference.
Most full kitchen packages run $14,000 to $45,000, with cabinet install at $4,000 – $13,000 and countertops at $2,000 – $6,500 before island and backsplash. Your final number depends on kitchen size, material grade, and whether plumbing or electrical gets relocated. Call (888) 578-4462 for an exact quote, and the estimate is free.
Every project is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship on cabinet install and countertop set. Manufacturer warranties on cabinets and stone ride on top of that. We put it in writing so there’s no fine print to argue about later.
Get Your Free Cabinets & Countertops Estimate in Midway City
We’ll come out to your Midway City kitchen, measure every wall, and hand you a line-item estimate within a few days. No pressure, no vague range that changes once work starts. Call (888) 578-4462 and a live person picks up. Tell us the rough size of the kitchen and what you’re replacing, and we’ll book the on-site visit.
Key Takeaways
- Full cabinets and countertops packages in Midway City run $14,000 to $45,000, with install taking three to five weeks.
- Cabinet lead time drives the schedule more than labor does.
- County of Orange permitting, not a city office, governs what needs a permit here.
- Older 1950s electrical often needs a code upgrade once the old boxes come out.
- Every job is covered by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.