Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Most concrete driveways in Irvine are poured between late spring and early fall, and a typical two-car driveway runs $4,500 – $12,000 depending on square footage, thickness, reinforcement, and finish. Standard pour-and-finish work takes 4 to 6 working days from demo to first drive-on, and Irvine’s plan-check adds time before the crew ever arrives. Call (888) 578-4462 for a free on-site estimate on concrete driveways & concrete work in Irvine.
Concrete Driveways & Concrete Work in Irvine: what the job actually involves
Concrete driveways & concrete work in Irvine means removing or forming over an existing slab, grading and compacting the base, setting forms and rebar or mesh, placing and finishing the concrete, and cutting control joints so the slab cracks where you want it to instead of where it wants to. Most Irvine driveways are 4 to 6 inches thick, broom-finished for traction, and sized between 400 and 700 square feet. Budget $4,500 – $12,000 for a full concrete driveway installation, or $5,000 – $14,000 if the old slab has to come out first. Irvine’s village HOA design review and the city’s building division both get a look at the plan before the first shovel goes in, and that approval step is usually what eats the calendar, not the pour itself.
How the work moves from demo to drive-on
Concrete work is a sequence, and each stage has a fixed duration the rest of the schedule hangs on. Here’s what actually happens on an Irvine driveway job.
Stage 1: Site walk, measure, and plan submission (days 1 – 2)
We measure the existing drive, note the slope away from the garage, check where the downspouts and utility boxes sit, and photograph the current surface. You decide the finished dimensions, the finish (broom, exposed aggregate, or a light texture), and whether any widening or apron changes are part of the scope. If your village association requires design review, that packet goes in here.
Stage 2: Demo and haul-off (1 day)
A 400-square-foot slab comes out in a single day with a skid-steer and a jackhammer, and the debris goes straight into a dumpster on site. Roots, old base material, and any failed subgrade get removed, not buried. If the existing drive is asphalt over concrete, that’s a two-layer removal and adds half a day.
Stage 3: Grading, base, and forms (1 – 2 days)
We cut the subgrade to depth, compact it in lifts, and bring in class II base to build a stable platform, usually 4 inches compacted. Forms go up, rebar or mesh gets tied and chaired off the ground, and the slope is checked so water runs to the street and not toward the garage door. This is also where you confirm expansion joint locations and any decorative border layout.
Stage 4: Inspection and pour (1 day)
Where a permit is required, the city inspects the forms and reinforcement before concrete goes in. The pour itself happens early in the morning to beat the heat. Finish, broom texture, and control joints all get cut the same day, and the crew stays on site until the surface is set enough to walk away from.
Stage 5: Cure and drive-on (3 – 7 days)
Concrete reaches useful strength in about 7 days and full design strength around 28. You can usually walk on it after 24 hours and drive on it after 7, but heavy loads wait longer. We come back at day 7 to check joints, seal if the schedule calls for it, and walk the finished surface with you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between on a concrete job
- Standard broom finish – the default for Irvine driveways. Good traction, hides tire marks reasonably well, and keeps the cost at the low end of the range. Best for a car-and-garden-hose driveway that just needs to work.
- Exposed aggregate – the top layer is retarded and washed to show the stone. Grippier and slightly cooler underfoot than broom, but it holds dirt and costs more in labor. It suits sloped drives and shaded entries.
- Decorative borders and scoring – a simple score pattern or a contrasting border band adds a finished look without a stamped surface. Adds a modest amount to the line item and no maintenance burden.
- 4-inch vs. 6-inch slab – a 4-inch slab is fine for passenger vehicles; a 6-inch pour with heavier reinforcement is the honest choice if a truck, RV, or trailer parks on it regularly.
- Reinforcement – welded wire mesh is the baseline; #3 or #4 rebar on a grid costs more but handles settlement better on Irvine’s clay-heavy soils. Rebar is worth the upcharge on any drive over 500 square feet.
- Base depth – 2 inches of base is thin and 4 inches compacted is standard. Deeper base costs a little more in material and hauling and pays it back in a slab that doesn’t heave or crack at the edges. Belgard pavers are an option if you’d rather go that route instead of concrete, and their color range works with Irvine’s Mediterranean palettes.
See the difference
Before
After
Before
After
Before
AfterWhat concrete driveways & concrete work costs in Irvine, CA
A new concrete driveway in Irvine runs $4,500 – $12,000. A full replacement where the old slab comes out runs $5,000 – $14,000. Patios, walkways, and backyard slabs sit in the $3,500 – $11,000 range for paver work, and concrete flatwork lines up similarly on the low end. Five things push a job up or down:
- Square footage – a single-car drive at 250 square feet is at the low end; a 700-square-foot curved drive with a widened apron is at the top.
- Existing condition – a clean asphalt curb cut and existing base are cheap to work over. A failed slab with root intrusion, a broken apron, or asphalt over concrete adds demo labor and disposal.
- Site access and slope – a tight side yard or steep grade that needs extra grading and retaining detail costs more than a flat, open frontage.
- Reinforcement and finish – rebar and exposed aggregate are the two biggest line-item swings.
- Permit and design review scope – a driveway repair or like-for-like replacement may not need a permit; a widening, new approach, or change to the street apron usually does.
A written line-item estimate breaks out demo, haul-off, base, rebar, concrete, finishing, and permit fees, plus a fixed total. What it typically doesn’t include: any landscape repair around the edges, driveway sealing in the first year, or work uncovered after the slab comes out (buried utilities, unexpected subgrade failure). Those get quoted and approved before we build them into the job.
What Irvine’s master-planned villages do to a concrete job
Irvine was built almost entirely by the Irvine Company beginning in the 1960s, so most of the driveways we replace sit inside village associations with their own architectural standards and their own design-review process. That changes this job in ways it doesn’t in Santa Ana or Tustin, where independent parcels and a patchwork of jurisdictions mean less uniform plan-check. In Woodbridge and Northwood, neighborhood driveways share a consistent color, apron treatment, and width, and your village board will want the replacement to match. A widening or a change of finish usually needs association approval before the city will issue a permit, and the city’s own building division is strict about form inspection, slope, and drainage details on every concrete pour.
Homeowners in Turtle Rock and the older parts of the village see the same pattern: concrete poured in the 1970s and 1980s that’s now spalling at the edges and cracking through the middle from root heave. Trees have grown, the original base has failed, and the slab is past salvage. Along the eastern and southern edges near the Santa Ana foothills, the slabs also take more summer UV and shrink-and-swell from dry heat than a coastal lot, and the wildland-urban interface areas carry fire-hardening expectations that extend to noncombustible site details. If you’re covering all of the paving scope from front drive to back patio, it’s part of a full Driveway & Pavers in Irvine project, and homeowners often pair a new concrete drive with a Garage Conversion ADU in Irvine since both projects touch the existing slab and apron. We cover the whole city on our Irvine service page, and a new drive is often the first piece of a larger plan that includes a New Detached ADU in Irvine out back.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: concrete driveways & concrete work in Irvine
A standard Irvine driveway takes 4 to 6 working days from demo to walking surface, plus 7 days before you drive on it. The variable is plan review and village design approval, which can add several weeks if your association requires architectural sign-off. Call (888) 578-4462 and we’ll tell you what your specific village will need.
Like-for-like replacement often doesn’t require a permit, but any change to the apron, a widening, a new driveway, or a structural slab usually does. Irvine also runs most of these decisions through village association approval, which is separate from the city permit. We pull permits and handle the inspection when one is required, and we’ll tell you up front whether yours needs one.
Yes, in almost every case. The driveway slab sits on its own base, so plumbing and structure stay untouched unless the demo uncovers a buried utility line or a failed subgrade under the drive. If that happens, we stop, show you what we found, and quote it before we build. The number we quote is the number you pay.
No. A written line-item estimate is a fixed price. The only thing that changes it is work you approve in writing after demo uncovers something nobody could see, like a collapsed base or a broken water line. Your estimate holds everything else, and all work is covered by our 730-Day Done Right Promise.
Every concrete job we do is covered by the 730-Day Done Right Promise: if the work isn’t right, we make it right. That covers workmanship, finish, and the details we control. Normal hairline cracking at control joints is expected behavior, not a defect, but a finish that fails or a joint cut in the wrong place is on us. Call (888) 578-4462 with any question about warranty coverage.
For a free on-site estimate on concrete driveways & concrete work in Irvine, call (888) 578-4462. A live person answers, day or night, and we’ll schedule a walk at your property, measure the drive, and talk through finishes, permits, and the village review your association may require. You’ll get a written line-item quote with a fixed price and a clear timeline before any concrete gets poured.
Written by the team at Groundwork Construction Co.