Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Irvine: What They Cost and How the Work Runs
Custom and geometric windows in Irvine typically run $8,000 to $25,000 for a multi-opening project, with most single feature windows landing between $2,500 and $6,500 each once templating, fabrication and stucco integration are included. Lead time is the real story: six to twelve weeks for fabrication, then two to four days on site per opening cluster. Call (888) 578-4462 and we’ll walk your plan through it, permit path included, at no charge.
Arched, round, trapezoid, angled eyebrow and full-height radius units behave differently from a rectangle. Nothing is off the shelf, nothing gets swapped from a warehouse rack, and every unit is measured to your actual opening. Here’s how that plays out in Irvine’s planned-community housing.
How we build Custom & Geometric Windows in Irvine, stage by stage
Geometric units fail or leak for one reason more than any other: somebody templated off a drawing instead of the framed opening. Our sequence is built to prevent that, and it costs you a little patience up front.
Stage 1: Site measure and field template (day 1, 2 to 3 hours)
We come out, pull trim where needed, and check the opening for square, plumb and true. On arched or angled openings we build a physical template of the radius or pitch and photograph the rough opening with a tape in frame. This is when you decide the operable-versus-fixed question and whether the unit is a picture feature or a venting window.
Stage 2: Specification and written quote (days 2 to 5)
You pick frame material, glass package, grille pattern and finish. We put the whole thing in a line-item quote: unit cost, templating, fabrication, flashing, stucco patching, permit fees and inspection. The number you see is the number you pay. If the opening needs structural work once we’re inside it, that gets flagged and priced before anyone swings a hammer, not after.
Stage 3: Permit and HOA submittal (weeks 1 to 4)
This is the slow stretch and it’s mostly paperwork. Irvine requires a permit for window replacement that changes the opening size or the egress configuration, and a radius or geometric unit almost always qualifies. If you’re in a village with a design-review board, the architectural submittal runs in parallel. We handle both packages.
Stage 4: Fabrication (weeks 4 to 12)
Custom units are built to order. Andersen and Marvin both build radius and polygon units, and lead times move around with glass packages and finish choices. You’ll get a fabrication update, not silence. This is the point where a change to the grille pattern or finish is still possible but adds time.
Stage 5: Installation, flashing, stucco and inspection (days on site, 2 to 4 per cluster)
Old unit comes out, opening gets prepped and squared, new unit sets into a bed of sealant with proper head flashing and a drainage plane. Stucco patching and finish blending follow, then the city inspection. Final walkthrough covers operation, screens, and the warranty paperwork. Everything falls under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between on a geometric window
Every one of these decisions changes both the price and how the window behaves in Irvine’s dry heat. Here’s the honest read on each.
- Frame material: vinyl vs. fiberglass vs. wood-clad. Vinyl is the budget path and handles a radius fine, but color options are limited and it can’t be painted. Fiberglass holds shape better on large arched units and takes paint. Wood-clad (Andersen’s 400 Series, for example) is the premium look for a Spanish-revival facade, at the top of the price band.
- Glass package. Dual-pane low-E is the baseline for Irvine’s UV load. Tempered glass is required where a unit is close to a floor or a door, and laminated glass is worth considering on any opening facing the wildland edge. Each step up adds cost.
- Grille pattern and divided lites. A true divided-lite arch is hand-built and priced accordingly. Simulated divided lites give the look for less; a clean single pane is the cheapest and the most modern.
- Fixed vs. operable. Most geometric units are picture windows. Making one operable adds hardware, a screen and real cost. Ask whether you actually need it.
- Trim and interior finish. Drywall return, wood casing or a stained jamb. Simple decision, real visual difference.
What Custom & Geometric Windows cost in Irvine, CA
For a typical project of three to five feature openings, budget $8,000 to $25,000. That range holds because the variables are knowable once we’ve templated your opening. Here’s what pushes a job to the low or high end.
- Unit geometry and count. One arched unit is a modest job. Six trapezoids around a great room is a production. Every opening carries its own template, fabrication and install labor.
- Opening condition. A clean, square rough opening costs less. Rot, sag, or a previous window installed without flashing adds demo and framing work.
- Material grade. Vinyl sits at the low end. Fiberglass and wood-clad move toward the high end.
- Stucco and finish integration. A radius in a stucco wall needs careful patching and blending. On a Spanish-revival facade this is where craftsmanship shows, and it’s priced accordingly.
- Permit and HOA scope. Structural changes, egress changes or a design-review resubmittal add time and fees.
A written estimate includes units, templating, fabrication, flashing, installation labor, stucco patching, permit fees and inspection. It does not include structural repairs discovered mid-job, HOA resubmittal fees if the design changes, or interior paint touch-up beyond the immediate opening. We spell out the exclusions so there are no surprises. Call (888) 578-4462 for an exact quote on your Irvine project.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine homes specifically do to this job
Irvine is a master-planned city, and that shape shows up in the paperwork before it shows up in the framing. Most of our custom and geometric window work happens inside village-specific HOAs and design-review boards, not across a patchwork of independent jurisdictions. The architectural standards here are uniform and strict, and the city’s building division runs a plan check that neighbors like Tustin or Santa Ana rarely match. A radius unit that would sail through elsewhere can stall for weeks on an HOA submittal if the grille pattern or finish color doesn’t line up with the village palette.
The housing stock is overwhelmingly post-1965 planned-community construction: Mediterranean and Spanish-revival stucco tract homes in Woodbridge, Northwood and Turtle Rock, plus the dense 2000s-era condo clusters near the Spectrum and UCI. On the 30-to-50-year-old tract homes we’re often replacing an original arched unit that has fogged, lost its seal, or opened a stucco crack above the header. Along the city’s eastern and southern edges, where homes abut open space and the Santa Ana foothills, WUI fire-hardening rules apply: ember-resistant vents, Class A assemblies, noncombustible detailing. A geometric window on that edge wants a tempered or laminated glass package and a fire-rated assembly that a contractor from outside Irvine often misses on the first plan check. We cover Irvine village by village.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Custom & Geometric Windows in Irvine
Plan on ten to sixteen weeks from signed contract to final inspection. Fabrication alone takes six to twelve weeks, and permit plus HOA review runs three to six weeks in parallel. Installation itself is two to four days per cluster. Call (888) 578-4462 and we’ll map the timeline for your specific openings.
Yes, in nearly every case. Irvine requires a permit when a window replacement changes the rough opening, the egress configuration, or the structural header, and a radius or polygon unit almost always does. We pull the permit and manage the inspection. Call (888) 578-4462 to confirm your scope.
Usually yes, if the unit fits the existing opening. The exceptions are an arch that needs a taller rough opening, an angled unit that requires a new header, or a change from fixed to operable that needs new framing. We identify those at templating, before fabrication begins.
Most multi-opening projects land between $8,000 and $25,000. Individual feature units typically run $2,500 to $6,500 once templating and stucco work are included. Material grade, opening condition and geometry are the main drivers. Call (888) 578-4462 for a free, written line-item estimate.
Our 730-Day Done Right Promise covers workmanship for two full years, and the manufacturer’s warranty covers the unit itself. If something isn’t right inside that window, we make it right. Every project carries the same guarantee, no exceptions.
Get a free estimate on Custom & Geometric Windows in Irvine
If your Irvine home has an arched, round, trapezoid or angled opening that needs a real window, call (888) 578-4462. A live person answers around the clock. We’ll schedule a free on-site estimate, template your opening, and hand you a written line-item quote with permits, HOA submittal and stucco work already in the number. No sales pressure. Just a straight answer on cost and timeline.
Written by the team at Groundwork Construction Co.