Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Irvine, CA
A fence gate in Irvine typically costs $650 to $2,400 installed, depending on width, material, and whether we’re hanging it on an existing fence line or building it as part of a new run. A gate is the one part of your fence you touch every day, so it has to swing clean, latch firm, and hold square through Irvine’s dry summers and the Santa Ana winds that push hard against anything not braced right. We build and hang gates as the finishing piece of every Fence Installation in Irvine project, and we back the work with our 730-Day Done Right Promise. Call (888) 578-4462 and a live person picks up, any hour.
Groundwork Construction Co. of Irvine connects homeowners with independent local crews who set posts in concrete, frame gates square, and hang hardware that actually lines up. Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives in uniform. This page covers what a gate costs here, what goes into the build, and what to watch for in Irvine’s particular climate and neighborhoods.
Key Takeaways
- Most single-walk gates in Irvine run $650 to $1,400; double-drive gates and custom designs run higher.
- Gate failure is usually a post, hinge, or bracing problem, not a gate problem. Get the posts right and the gate stays true.
- We hang gates in wood, vinyl, composite, aluminum, and ornamental steel, matched to the fence line.
- Every gate we install is covered by the 730-Day Done Right Promise, and estimates are free.
When You Need Fence Gates
Gates wear out faster than the fence they hang on. They carry more load, get slammed more often, and take the brunt of weather on the move. Here’s what we hear from Irvine homeowners before they call us:
- The gate drags on the ground or won’t latch. In Irvine’s dry season, wood fence posts can shrink and shift slightly, and a gate that closed fine in spring starts catching by August. A gate that won’t latch is a symptom of a post settling or a hinge pulling loose, not the gate itself going bad.
- The wind has pulled it loose. Santa Ana winds push sideways stress on a gate that a fence panel never sees. If you’re in a spot that catches those gusts – open lots near the Great Park, hillside lots in Turtle Rock, or a side yard that funnels wind – a gate hung without proper diagonal bracing will sag within a year or two.
- You’re adding a dog run or securing a pool area. Irvine homeowners with pools need a self-closing, self-latching gate to keep the yard compliant and safe for kids and pets. We hang gates with spring hinges and latches rated for that job.
- The old gate is rotted at the bottom rail. Wood gates rot from the bottom up, where moisture sits against the ground. A gate can look fine at the top and be soft enough to break free at the hinges.
- You want a walk gate plus a drive gate. Corner lots and larger properties in Irvine often need a pedestrian gate on the side yard and a wider double gate for vehicle access. We build both to match.
- The fence is going up new. When we run a new fence line, we plan the gate openings, posts, and hardware from the start, so everything lines up and swings right the first time. You can see that full scope on our home page, or read the specific Fence Installation page for the broader service.
Our Fence Gates Process
A gate is only as good as the posts it hangs from. Here’s how we work:
- Walk the line and measure. We size the opening, check grade, note where the gate needs to swing, and confirm post placement. We also look at what the gate has to coordinate with – a driveway, a walkway, a side-yard easement – so you don’t end up with a gate that opens into a wall or blocks a path.
- Set posts deep and brace them. Gate posts carry a lot more load than fence posts, so they get set deeper and in concrete. We brace gate frames with diagonal supports so the gate holds square as the wood or composite moves with the seasons.
- Frame and hang the gate. We frame the gate true, hang it on heavy-duty hinges sized for the weight of the material, and set the latch to close clean with a small gap. Self-closing and self-latching hardware is available for pool and pet areas.
- Check the swing and the fit. Before we leave, we open and close the gate a dozen times, confirm it doesn’t bind, drop, or hit the fence, and make sure the latch catches every time. A gate that works on day one but not day 200 isn’t finished work.
- Back it in writing. Every gate we install is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right – the guarantee is on paper, not in a pitch.
Material choices matter too. For gates that have to match a home’s exterior, we work with brand partners like James Hardie for composite and fiber-cement surfaces, and we coordinate hardware and finishes so the gate looks built-in, not bolted on. If your project also touches roofing or structural work, our Roofing in Irvine and Home Additions & ADU in Irvine teams coordinate so one project doesn’t fight another.
Fence Gates Pricing in Irvine
Gate pricing depends most on width, material, and hardware. Here’s a realistic range for Irvine:
| Gate type | Typical installed range |
|---|---|
| Wood walk gate (3-4 ft), hung on existing posts | $650 – $1,100 |
| Wood double drive gate (10-16 ft) | $1,400 – $2,400 |
| Vinyl or composite walk gate | $900 – $1,600 |
| Ornamental aluminum or steel gate | $1,200 – $2,800 |
| New gate posts set in concrete (each) | $250 – $450 |
| Self-closing / self-latching hardware upgrade | $150 – $400 |
A few things push cost up: wider openings need heavier frames and hinges; a gate on a sloped side yard needs custom fitting; and custom designs or matched finishes cost more than a standard panel. Replacing just a gate on sound posts is the cheapest job. Building a gate on new posts is the most durable. Free estimates are always available, and our no-hassle upfront pricing means the number you see is the number you pay. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months if your gate is part of a larger fence or yard build.
If you’re also reworking a driveway approach, our Driveway & Pavers in Irvine page covers how gate placement lines up with a new driveway or paver apron.
What affects the price most
- Material. Wood is the most economical. Composite and aluminum last longer and cost more up front.
- Width and weight. A wide double gate needs heavier hardware and stronger posts than a 3-foot walk gate.
- Existing posts. If the old posts are sound, we can often reuse them. If they’re rotted or undersized, they get replaced.
- Hardware. Self-closing hinges, pool-rated latches, and decorative hardware add cost.
FAQs – Fence Gates
How much does a fence gate cost in Irvine?
A basic wood walk gate in Irvine runs $650 to $1,100 installed, and a wider double drive gate runs $1,400 to $2,400. Custom designs, aluminum or steel gates, and new posts push the total higher. Call (888) 578-4462 for an exact quote – estimates are free.
Can you fix a gate that won’t latch or is dragging?
Yes. A gate that drags or won’t latch usually has a settled post, a loose hinge, or a frame that has gone out of square, and we fix all three. Most repairs are done in a single visit. Call (888) 578-4462 and we’ll set up a time to look at it.
Is it cheaper to repair or replace a gate?
Repairing a gate on sound posts is almost always cheaper, often $200 to $600 for hinge, latch, or bracing work. If the posts are rotted or undersized, replacement makes more sense because a new gate on bad posts will fail again. We’ll tell you straight which one you need.
Do you install self-closing gates for pool areas in Irvine?
Yes. We install self-closing, self-latching gates with hardware rated for pool and pet areas, which is what most Irvine homeowners want for safety and code compliance. Call (888) 578-4462 to talk through what your pool enclosure needs.
Which Irvine neighborhoods do you serve?
We serve homeowners across Irvine, including Woodbridge, Turtle Rock, Northpark, Westpark, Quail Hill, and Great Park, along with nearby communities like Tustin and Lake Forest. See our Fence Installation in Tustin and Fence Installation in Lake Forest pages if you’re just outside Irvine.
What materials do you use for fence gates?
We build gates in wood, vinyl, composite, aluminum, and ornamental steel, and we match the gate to your existing fence or home exterior. For hard, weather-resistant surfaces we work with brand partners like James Hardie, and for related exterior work we draw on GAF and CertainTeed products on the roofing side. The right material depends on your fence, your climate exposure, and how much traffic the gate gets.
How long does a fence gate last in Irvine?
A well-built wood gate typically lasts 10 to 15 years with basic maintenance, while vinyl, composite, and aluminum gates last longer. Irvine’s dry summers and occasional winds are the main wear factors, which is why we brace frames and set posts deep.
Can you match a new gate to an existing fence?
Yes. We match height, spacing, material, and finish so the gate looks like it was always part of the fence line. If the existing fence is a brand or profile we can still source, we match it; if not, we tell you and show you the closest options.
If your project touches more than the fence line, we can look at the whole scope. Our Kitchen Remodeling in Irvine, Bathroom Remodeling in Irvine, and Windows & Doors in Irvine teams work alongside the fence crew so schedules line up and you’re not juggling multiple contractors. Homeowners in nearby areas like Fence Installation in Orange, Fence Installation in Anaheim, Fence Installation in Santa Ana, Fence Installation in Huntington Beach, and Fence Installation in Costa Mesa can read the local details on those pages.
Whether you need one gate rehung or a whole new fence line with matching gates, our crews are ready. Call Groundwork Construction Co. of Irvine at (888) 578-4462 for a free estimate – a live person answers around the clock, and the number you see is the number you pay.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine.