Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Westminster, CA: What the Job Really Involves
Impact windows and doors in Westminster typically run $8,000 to $25,000 for a full-house package, and most single-story tract homes we see finish in 2 to 4 working days once the order lands. The work is a swapped assembly, not a remodel: old frames come out, the rough opening gets squared and flashed, and laminated glass units rated for wind-borne debris go in. Call (888) 578-4462 for a free on-site estimate and a written line-item quote.
How We Run an Impact Window & Door Job, Stage by Stage
Most companies describe this as “we handle everything.” Here’s what actually happens, and when you have to make a decision.
Day 1 morning: measure and confirm
We template every opening, check sill heights and wall thickness, and photograph the existing frames. Westminster stucco homes from the 1950s through the 1970s often have uneven openings from settling, so we measure the rough opening, not just the visible window. You sign off on the final unit schedule here: which openings get fixed vs. operable, and which swing.
Days 2 to 4: fabrication and permit
Impact units are built to order, so this window is for paperwork. We pull the permit and, where required, submit product approval documentation showing the glass and frame assembly meets the applicable wind-borne debris standard. You’ll confirm glass tint (clear, bronze, or low-E) and frame color during this stage. Lead time on custom sizes runs longer; standard sizes move fastest.
Install day 1: demo and prep
Old sashes and frames come out, and we cut back stucco only as far as the nailing flange needs. Rough openings get squared, shimmed, and flashed. On a typical Westminster single-story home we open 6 to 10 windows in a day. Doors take longer because of threshold and sill prep.
Install days 2 to 3: setting and sealing
Units get set plumb and level, fastened through the flange, and sealed with flashing tape and exterior sealant. Interior trim goes back on the same visit. You’ll walk the openings with us before we close out, checking operation and latch alignment.
Final day: inspection and punch list
The city inspects, we touch up stucco and paint at the perimeter, and you get a punch list walkthrough. Any adjustment to a sash or lock happens before we leave. Our 730-Day Done Right Promise covers the installation; if something isn’t right, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Impact-rated products aren’t one thing. These are the decisions that shape both the price and how the house feels afterward.
- Frame material: vinyl vs. aluminum vs. wood-clad. Vinyl is the value pick and holds up well in our climate, but colors are limited. Aluminum is slimmer in profile and takes a wider color range, at roughly 15 to 25 percent more. Wood-clad (we install Andersen and Marvin lines) gives the best interior look and the highest cost.
- Glass package. Laminated impact glass is the point of the job. Adding low-E and argon between panes helps with heat gain, which matters on west-facing walls along Beach Blvd where afternoon sun is brutal.
- Fixed vs. operable. Big fixed picture units cost less per square foot and carry the strongest rating. Operable units (casement, awning, slider) cost more because of the hardware and gasketing.
- Doors: hinged vs. sliding. Hinged impact doors are simpler and seal tighter. Sliding impact doors are what most patios here have, and they cost more because of the track and roller system.
- Finish and trim. Standard interior trim is included in most quotes. Matching a specific 1960s casing profile costs extra, and we’ll tell you upfront whether it’s worth chasing.
What Impact Windows & Doors Cost in Westminster, CA
Plan on $8,000 to $25,000. That’s the honest range for a whole-house impact package in Westminster, and it covers supply, permit, installation, and finish work.
| Line item | Typical range |
|---|---|
| Single impact window (standard size) | $550 – $1,100 |
| Large fixed or picture unit | $1,200 – $2,200 |
| Impact entry door | $1,800 – $3,500 |
| Impact sliding patio door | $2,500 – $5,500 |
| Full-house package (10 to 16 openings) | $8,000 – $25,000 |
What pushes a job to the high end: number of openings, oversize units, stucco repair scope, second-story access, and frame material upgrades. Low end means standard sizes, vinyl frames, and single-story access.
A written estimate should list every opening, the unit spec, glass package, frame color, and the permit line. What it usually won’t include: interior repaint beyond the trim, blind or shutter replacement, and any rot discovered behind the old frame once it’s out. We flag that last one before we demo, not after.
See the difference
Before
After
Before
After
Before
AfterWhy Westminster Housing Stock Changes This Job
Most of the housing between Beach Blvd and Brookhurst St was built in the 1950s through the 1970s as single-story stucco tract homes. That era means original single-pane aluminum sliders and narrow rough openings, and we routinely find that a previous owner swapped one window without flashing it correctly. Opening a wall here often reveals framing that needs sistering before a new impact unit can be fastened properly. The city’s permitting process for these homes is straightforward but requires product approval documentation on the impact assembly, so we submit that with the application. Santa Ana wind events at the city’s edges are the practical reason homeowners here ask about impact glass in the first place, and the dry-season gusts are when old frames and lock hardware fail on their own. HOA rules vary block to block, and we check color and visible-profile restrictions before the order goes in.
Serving Westminster, CA – Our Local Coverage Area
We serve Westminster and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Impact Windows & Doors in Westminster
Most whole-house jobs finish in 2 to 4 working days once materials arrive, plus 2 to 4 business days for fabrication and permit. Single-room jobs are often done in a single visit. Call (888) 578-4462 for a scheduling estimate based on your opening count.
Yes. Replacement windows and doors here require a permit, and the impact assembly needs documentation showing it meets the wind-borne debris standard. We pull the permit and handle the inspection. Call (888) 578-4462 with questions on your specific openings.
In most cases yes, because a replacement unit fits into the existing rough opening. If the opening is out of square or the framing is soft, we address that before setting the new unit. That scope gets priced in writing before work starts.
Budget $8,000 to $25,000 for a whole-house package, depending on opening count, unit size, frame material, and stucco repair. Call (888) 578-4462 for an exact quote; estimates are free.
Our installation is covered by the 730-Day Done Right Promise, and the manufacturer’s product warranty covers the glass and frame. Both are documented in your estimate. Homeowners often pair this work with an Aluminum Fence in Westminster or an Iron Fence in Westminster to finish the exterior. For broader scope, see our Windows & Doors service, or the full Windows & Doors in Westminster page.
Get a Free On-Site Estimate
We measure every opening, walk the exterior, and hand you a written line-item quote with no surprises built in. Calls are answered by a live person around the clock at (888) 578-4462, and we cover Westminster including the 92683, 92685, and 92684 ZIP codes. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.