Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterIron Fence in Irvine, CA
An iron fence in Irvine, CA typically costs between $3,200 and $9,800 for a standard residential run, with most homeowners landing in the $4,500 to $7,200 range for 100 to 150 linear feet of ornamental steel or wrought iron. Iron fencing is the right call when you want a property line that reads as permanent, holds its finish through Irvine’s dry summers and Santa Ana wind seasons, and adds resale value that a wood or vinyl fence won’t match. Call (888) 578-4462 and a live person answers, day or night.
Groundwork Construction Co. of Irvine installs ornamental iron fencing as part of our full Fence Installation work, and we’ve done enough of it in this city to know the difference between a fence that looks good on install day and one that’s still solid after a decade of marine layer mornings and 95-degree August afternoons. Iron doesn’t rot, it doesn’t warp, and it doesn’t get chewed by termites the way a cedar or redwood fence in Irvine’s older neighborhoods will over time. What it does need is correct footings, proper rust protection at every weld and cut, and posts set deep enough to hold through the wind gusts that funnel down the canyons.
That’s where the details matter and where we put our name on the line. Every iron fence project we complete is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Our technicians have up to 12 years of experience with ornamental metal, and they arrive background-checked and in uniform. No unmarked trucks, no crew you’ve never been introduced to.
Key Takeaways
- Most Irvine iron fence projects run $32 to $65 per linear foot installed, all-in.
- Powder-coated steel is the standard choice for Irvine’s climate; wrought iron is the premium option.
- Irvine has specific fence height and setback rules through the city’s planning department – we handle the review.
- Iron fences outlast wood by 20-plus years and need recoating every 5 to 8 years in coastal air.
- We offer no-hassle upfront pricing, a free project estimate and design consult, and 0% financing for 18 months.
When You Need Iron Fence
Iron fencing isn’t the answer for every property line, but it’s the clear answer for these situations. Here’s when Irvine homeowners call us for it:
- You’re replacing a failing wood or vinyl fence along a busy street. Fences that face Irvine Boulevard, Culver Drive, or Jamboree Road take a beating from road grime, sun, and wind. Wood fences in these spots often need replacement in 8 to 12 years. Iron doesn’t. Homeowners in Woodbridge and Westpark regularly make this switch when their second or third wood fence gives out.
- You want security without a solid wall. In Turtle Rock and Shady Canyon, where lots back up to open space or shared greenbelt, an iron fence gives you a clear sightline while still defining the property edge. A 5-foot ornamental iron fence tells anyone approaching exactly where your yard starts without blocking the view you paid for.
- Your HOA requires a specific look. Many Irvine community associations – especially in newer villages like Great Park and Portola Springs – have architectural review requirements that call for ornamental iron or steel picket fencing along certain perimeter zones. We pull those guidelines before we build anything.
- You have a pool or spa and need a code-compliant barrier. California pool safety code requires a barrier that meets specific height and gap criteria. A properly built iron fence satisfies those requirements and looks better than a temporary mesh barrier. We build to the current code, not last year’s.
- You want a driveway gate that matches the fence. Iron gives you the option to run a matching pedestrian gate and a driveway gate that actually functions – welded frames, proper hinges, and swing clearance planned from the start. Doing this with wood or vinyl looks cobbled together.
- You’re fencing a corner lot where visibility matters. In Northwood and El Camino Real neighborhoods, corner lots need fencing that doesn’t block driver sightlines at the intersection. An open-picket iron fence handles that while a solid privacy fence can’t.
If you’re not sure iron is the right material for your property line, our Fence Installation in Irvine page walks through the comparison between wood, vinyl, block, and iron so you can see the tradeoffs side by side.
Our Iron Fence Process
We don’t guess at fence layouts and we don’t start digging before we’ve confirmed what’s underground. Here’s what a Groundwork iron fence project looks like from first call to final walkthrough:
- On-site estimate and design consult. We walk the property line with you, measure the run, confirm the fence height you want, and talk through material options. You get a written price with the scope spelled out – no vague “TBD” line items. This consultation is free.
- Underground utility check and permit review. Before anyone touches a shovel, we call 811 and have utilities marked. We also confirm what Irvine’s planning department requires for your specific lot, including HOA architectural review if applicable. Fence height limits and setback rules are enforced in Irvine, and we’d rather sort that out on paper than after posts are in the ground.
- Footing layout and post setting. Iron fence posts need concrete footings that go deeper than most fence installers bother with – usually 24 to 36 inches depending on soil and wind exposure. Irvine’s soil conditions vary from clay-heavy areas to sandy patches, and we size footings accordingly. We set posts plumb and at consistent depth, because a wavy fence top line is the first thing anyone notices.
- Panel fabrication and installation. Panels are cut to the exact run length, welded or assembled with proper hardware, and set level. We use powder-coated steel or wrought iron depending on what you’ve chosen, and we treat every cut edge and weld point with galvanized or cold-galvanized coating before touch-up paint goes on. That step is what prevents rust from starting at the joints two years down the road.
- Gate hang and hardware install. Any gates get heavy-duty hinges rated for the gate’s weight, and we set them so the gate swings clean without dragging. Gate hardware is where cheap fence jobs fall apart first – a gate that sags within a year is a warranty call waiting to happen, and we build so it doesn’t.
- Final walkthrough and warranty registration. We walk the full run with you, check every post for plumb, test every gate, and confirm the finish is intact. Then we register your project under our 730-Day Done Right Promise so the coverage is documented, not just promised.
Most residential iron fence runs in Irvine take one to three days from start to finish, depending on length, gate count, and whether the footings need extra cure time. We’ll give you the specific timeline with your estimate.
Iron Fence Pricing in Irvine
We price iron fence work with no-hassle upfront pricing – the number you see on your estimate is the number you pay. Here’s what iron fencing actually costs in Irvine’s market, by line item:
| Project type | Typical price range | What it covers |
|---|---|---|
| Standard ornamental steel, 4 ft tall | $32 – $46 per linear foot | Powder-coated steel picket fence, posts, concrete footings, install |
| Premium ornamental steel, 5-6 ft tall | $45 – $58 per linear foot | Heavier gauge, taller panels, stronger posts, decorative picket options |
| Wrought iron, custom design | $55 – $80+ per linear foot | Hand-welded wrought iron, custom picket spacing, scrollwork or finials |
| Pedestrian gate (matching fence) | $500 – $1,100 installed | Gate frame, hinges, latch, install |
| Driveway gate (manual swing) | $1,800 – $4,500 installed | Heavy-duty welded gate, hinges, posts, install |
| Removal of old fence | $300 – $700 | Demo and haul-away of existing wood, vinyl, or metal fence |
| Recoating or restoration (existing iron) | $8 – $14 per linear foot | Surface prep, rust treatment, new powder coat or paint |
For a typical 120-foot residential iron fence in Irvine with one pedestrian gate, expect to spend $5,000 to $7,500 all-in, including removal of the old fence. A 200-foot perimeter with a driveway gate pushes into the $10,000 to $15,000 range depending on material grade.
What affects the price in Irvine specifically:
- Footing depth and soil. Some Irvine properties have soil or subsurface conditions that require deeper footings or extra concrete, which adds to labor and material cost.
- Material grade. Powder-coated steel is the workhorse choice. Wrought iron costs more, lasts longer, and is what you want if you’re matching a historic or high-end architectural style.
- Height. Irvine code allows up to 6 feet in most residential zones, but HOA requirements can reduce that. Taller fences need heavier posts, which costs more.
- Gate complexity. A simple pedestrian gate is straightforward. A wide driveway gate with automation is a whole different project, and we quote it separately so you know exactly what each piece costs.
- Finish and detailing. Finials, scrollwork, custom picket spacing, and color matching all add cost. Talk through what you actually want with the design team before you commit.
We also offer 0% financing for 18 months and $1,000 off projects over $10,000, so if your iron fence project is part of a larger yard overhaul – say, a new fence plus driveway pavers plus a gate – you can bundle them and keep the budget in one place. The free project estimate and design consult is where we work all of that out.
If you’re also considering a roof or window upgrade while we’re on site, we’re the same contractor for those trades. Our roof work uses GAF and CertainTeed systems, and our window work includes Andersen and Marvin products. One crew, one phone number, one person accountable when something needs attention.
Frequently Asked Questions – Iron Fence
How much does an iron fence cost in Irvine, CA?
An iron fence in Irvine runs $32 to $80 per linear foot installed, depending on material grade and height. Most residential jobs land between $4,500 and $7,500 for 100 to 150 feet with a gate. For an exact price on your property line, call (888) 578-4462. Estimates are free and we don’t pad them with line items you didn’t ask for.
How long does an iron fence take to install in Irvine?
Most residential iron fence projects in Irvine take one to three days, weather permitting. Footings need cure time before panels go up, so a same-week install is typical once the final design is set. Longer runs with multiple gates or custom wrought iron work can stretch to four or five days. We’ll give you the exact timeline with your written estimate, and we show up when we say we will.
Does Irvine require a permit for an iron fence?
Irvine requires a permit for fences over 6 feet tall and for any fence in certain setback zones or on corner lots where sight distance matters. Many Irvine HOAs also require architectural review before installation, and those rules can be stricter than the city’s. We handle the permit and HOA review as part of the project, so you’re not stuck playing phone tag with the planning department. Call (888) 578-4462 and we’ll tell you what applies to your address.
How long does an iron fence last in Irvine’s climate?
A properly installed and finished iron fence lasts 25 to 40 years in Irvine’s climate, and often longer. Irvine’s coastal marine layer and dry summers are actually easy on iron compared to humid climates, but salt air from the coast and wind-blown dust can dull the finish over time. Plan on a recoat every 5 to 8 years, which runs $8 to $14 per linear foot. Our 730-Day Done Right Promise covers the installation workmanship for two full years, so if anything about the install fails early, we fix it at no charge to you.
Is iron fence cheaper to repair or replace?
Repair is almost always cheaper than replace if the fence is under 15 years old and the rust is surface-level, not structural. A single damaged panel typically costs $300 to $800 to repair. A full replace makes more sense when posts are rusted through, footings have shifted, or more than a third of the panels are compromised. Our team will tell you honestly which side of that line you’re on during the free estimate.
Can you install an iron fence along an existing property line with mature trees?
Yes, and it’s common in older Irvine neighborhoods like Woodbridge and Northwood where mature trees line the lot edges. We route the fence line around root zones rather than cutting through major roots, and we adjust footing depth and spacing to work with what’s there. It takes a bit more planning on the front end, but it saves you from a cracked trunk or a heaving panel a year later.
Do you offer financing for iron fence projects in Irvine?
We do. 0% financing for 18 months is available on qualified projects, and the $1,000 off projects over $10,000 applies to iron fence jobs that hit that threshold – a longer perimeter with a gate usually does. Your estimator will lay out the options in plain language with no hidden fees. Call (888) 578-4462 to get started.
What’s the difference between wrought iron and ornamental steel for an Irvine fence?
Wrought iron is a traditional low-carbon iron that’s heavier, more rust-resistant over a long horizon, and typically hand-welded for a custom look. Ornamental steel is a modern alternative that’s galvanized and powder-coated, costs 20 to 35 percent less, and performs well in Irvine’s climate. For most homeowners, ornamental steel is the practical choice. For high-end architectural work or historic properties, wrought iron is worth the premium. We’ll show you both during the estimate so you can compare against your actual property.
Ready to Get Your Iron Fence in Irvine?
If you’re tired of patching a fence every couple of years or you’ve got a property line that needs something built to last, an iron fence is the right move – and Groundwork Construction Co. of Irvine is the team to build it. Our technicians have up to 12 years of experience with ornamental metal work, every job is backed by our 730-Day Done Right Promise, and we answer the phone 24/7 with a live person on the other end. No voicemail, no waiting until Monday.
Call (888) 578-4462 for a free estimate and design consult. We’ll walk your property line, give you a written price with no-hassle upfront pricing, and tell you straight what you actually need. From foundation to finish line – and built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine.