A Groundwork company - serving Irvine, CA
Iron Fence in Irvine, CA | Groundwork Construction Co. of Irvine

Iron Fence in Irvine - Written Price Per Foot, Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Irvine, CA: What the Job Actually Involves

An iron fence in Irvine, CA typically runs $3,500 to $9,000 for a residential property, installed over 2 to 4 weeks from first layout to final walkthrough. That price covers posts, panels, gates, concrete footings, and city inspection on a standard front or side-yard run. Most Irvine homeowners are choosing between aluminum and true wrought iron, and the gap between them is bigger than the price tag suggests. Call (888) 578-4462 for a free on-site measurement and a written line-item quote.

Call (888) 578-4462

How the Install Sequence Runs, Stage by Stage

Iron fencing is a posts-first job. The panels are simple. The posts and footings decide whether the fence is straight in five years or leaning after one Santa Ana wind season. Here is the sequence we run in Irvine, and what you’ll be asked to decide at each point.

Stage 1: Site walk and layout (day 1, 2 – 3 hours)

We mark the property line, confirm setback from the sidewalk, and check for irrigation lines, low-voltage landscape lighting, and any buried utilities before a shovel hits dirt. In Irvine’s tract neighborhoods the side-yard easements can surprise people, so we cross-check the plat before we stake anything. You’ll decide the fence height and gate placement here, since moving a gate later means re-pouring a footing.

Stage 2: Digging and footings (days 1 – 3)

Post holes get dug to depth, set with gravel for drainage, and filled with concrete that cures overnight. On a 100-foot run you’re looking at roughly 12 to 16 posts depending on panel width. This is the slowest stage and the one most worth doing right. Panels go up fast; footings that aren’t deep enough in Irvine’s dry, shifting soil show up as a wavy top rail two summers later.

Stage 3: Post mounting and panel set (days 3 – 5)

Posts get set plumb, brackets go on, and panels hang between them. This is the stage where a good installer earns their keep, because a half-degree out of plumb at post one becomes an inch of drift by post ten. You’ll confirm gate swing direction and latch hardware now. If you want an automatic opener on a driveway gate, tell us before this stage so the conduit goes in with the posts.

Stage 4: Gates, hardware, and finish (days 5 – 7)

Gate frames get hung, hinges adjusted, and latches set for smooth operation. Powder-coated finishes arrive baked on from the manufacturer. If you’re going with a painted wrought iron look, touch-up happens here. This is also when we check the whole run for level and plumb with a laser before we call it done.

Stage 5: Inspection and walkthrough (day 7 – 10)

City inspection covers footing depth, post spacing, and setback. We schedule it, meet the inspector, and handle any correction on the spot. Then you and a supervisor walk the line together, test every gate, and sign off. Any punch item gets fixed before we leave the property.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

Most of the decision comes down to material, and the honest answer is that the right pick depends on how much maintenance you’re willing to do. Here’s what Irvine homeowners actually weigh:

  • Aluminum (powder-coated): The most common pick in Irvine. It won’t rust, holds its finish for 15-plus years, and runs lighter on the budget. Brand examples include Jerith and ActiveYards. The trade-off: lighter gauge panels can dent on impact, and it doesn’t carry the heft of true iron.
  • True wrought iron: Heavier, denser, and the look that matches Irvine’s Mediterranean-revival architecture most closely. It dents less and lasts decades. The trade-off is a higher cost and a need for repainting every several years to keep rust at bay, since iron rusts wherever the finish chips.
  • Steel ornamental: Sits between the two. Strong and affordable, but requires galvanizing or regular repainting. A good fit if you want the weight and don’t mind upkeep.
  • Finish and color: Powder coat in black is standard. Bronze and architectural tones cost a bit more but hold up better against Irvine’s UV load, which fades cheaper finishes faster than homeowners expect.
  • Gate style and automation: Walk gates run simple. Driveway gates with an auto-opener add real cost but are common on Irvine lots with a side-entry driveway.

What Iron Fence Costs in Irvine, CA

Plan on $3,500 to $9,000 for a residential iron or aluminum fence in Irvine. The spread depends mostly on run length, material grade, and gate count. Here’s the breakdown that drives the number:

Item Typical Range
Aluminum fence, standard run (60 – 100 ft) $3,500 – $6,500
True wrought iron, same run $6,000 – $9,000
Driveway gate with auto-opener Adds $1,500 – $4,000
Extra posts for short panel width Adds $150 – $250 per post

What pushes a job toward the high end: a long run with tight panel spacing, true wrought iron instead of aluminum, a motorized driveway gate, and a sloping yard that needs stepped panels and more footings. What keeps it at the low end: a short straight side-yard run, standard black powder coat, one walk gate, and flat grade. A written estimate from us lists posts, panels, gates, concrete, hardware, and inspection separately, so you can see exactly where the money goes. It does not include landscaping repair or repainting an existing wall.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Irvine’s Planned-Community Rules Do to This Job

Irvine is a master-planned city, built almost entirely by the Irvine Company from the 1960s onward, so most fence work here happens inside village-specific HOAs and design-review boards. That means a metal fence along your side yard can require written architectural approval from a village association before a single post goes in, and the board reviews things like height, color, and panel style against a uniform standard. The same review process is unusual in neighboring Santa Ana or Tustin, where homes are more often on independent lots. Along the city’s eastern and southern edges near the Santa Ana foothills, wildland-urban interface fire-hardening rules also apply, and a metal fence with noncombustible posts and panels fits well with those defensible-space details. We’ve seen plenty of Irvine tract homes in Woodbridge and Northwood where an original wood fence is failing and the homeowner wants iron as a fire-resistant, long-lived replacement. We handle the design-review paperwork and the footing inspection, so the HOA and the city never become your problem. If your project grows into something wider than a fence run, our Fence Installation in Irvine page covers the full scope, and homeowners often pair a new fence with Patios, Walkways & Pool Decks in Irvine to finish the yard in one pass.

Serving Irvine, CA – Our Local Coverage Area

We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions: Iron Fence in Irvine

Get a Free Iron Fence Estimate in Irvine

If you’re weighing iron versus aluminum, or sorting out what your HOA will approve, we’ll walk your property, measure the run, and hand you a written line-item estimate at no cost. Our technicians have up to 12 years of experience, and we pull the permits and pass the inspections for you. We serve Irvine and the surrounding area, and our wider Fence Installation service covers the rest. Call (888) 578-4462 to schedule your free estimate.

Written by the team at Groundwork Construction Co. of Irvine.

Why Irvine Chooses Groundwork Construction Co. of Irvine

We set the standard for iron fence in Irvine.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irvine

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Irvine Customers Say

Trusted by homeowners across Irvine and surrounding areas.

★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson

Ready for Iron Fence in Irvine?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Irvine.

(888) 578-4462

Request a Free Estimate in Irvine

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch