Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Garden Grove, CA: What It Takes and What It Costs
Metal roofing in Garden Grove, CA runs $15,000 to $40,000 for a full residential install, and the typical single-story ranch here lands in the $18,000 to $28,000 range. Most jobs take three to six working days once materials are on site, with the tear-off and prep filling the first day and the panels or tiles going up over the next two to four. Call (888) 578-4462 for a free on-site estimate with a written, line-item quote.
We treat this as a one-trip job where we can. A crew that has to come back twice burns your time and our credibility, so we measure, order, and stage everything before the first shingle moves. That matters on a lot with a detached workshop or a heavy front-entry build where access is tight and the schedule has no room for loose ends.
How Our Metal Roofing Installation Actually Runs, Day by Day
Metal roofing has a different rhythm than shingle work. The sequence below is what we follow on Garden Grove homes, and here’s how each stage runs:
- Day 1 – tear-off and deck inspection. We strip the old roofing, haul it off, and walk the sheathing. Rotted or delaminated sheets get cut out and replaced, and we photograph anything that changes the estimate before we touch it. You’ll approve any added decking in writing that morning.
- Day 2 – underlayment and flashing prep. Synthetic underlayment goes down, then we set the eave trim, valleys, and penetration flashings. This is where the roof either sheds water for thirty years or leaks at year three, so we spend the time. Usually a full day on a 1,500-square-foot ranch.
- Days 3 through 5 – panel or tile install. Panels or metal tiles go on in sections, fastened to the manufacturer’s spacing, then the ridge cap and hip closures close it up. On a straightforward single story, two installers finish the field of the roof in two to three days.
- Day 5 or 6 – detailing and inspection. We seal and torque penetrations, install ridge venting, and walk the perimeter for metal shavings. Then the crew does a water test at the valleys and any dormers. City inspection follows on the schedule the permit office gives us.
- Closeout. We hand over the manufacturer warranty paperwork and our own 730-Day Done Right Promise in writing. Any punch-list item gets fixed on a return visit we schedule before the crew leaves the driveway.
What you decide at each stage: color and profile on day one, whether to add a ridge vent or keep the existing venting, and whether the fascia and drip edge need replacement once the old roof is off. We bring samples of the profiles to the estimate so most of those calls happen before day one anyway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Weigh
Metal roofing isn’t one product. The choices below are the ones that actually come up on Garden Grove homes:
- Standing seam (concealed fastener). The cleanest look and the longest lifespan, with panels that expand and contract as one piece. Highest cost, best for a home you plan to keep. The fasteners are hidden, so there’s nothing to back out over time.
- Exposed-fastener corrugated or ribbed panels. The budget option, roughly at the low end of the range. Faster to install and cheaper per square, but the screws and their washers eventually need checking. Fits a workshop or detached garage well.
- Metal tile (stone-coated steel). Mimics the barrel tile and shingle profiles common on Orange County homes while weighing a fraction of clay tile. A middle price point that suits a ranch home’s pitch and curb line.
- Coating and color. A quality paint system holds color for decades; a cheap coating fades within ten years. On a property with hard sun exposure, the upgrade is worth it. We can match James Hardie siding tones if you’re planning exterior work at the same time.
- Panel gauge. Thicker steel resists denting from limbs and hail. On a lot under mature ficus or citrus, we lean toward the heavier gauge.
Pairing a new roof with exterior work is common here – homeowners often plan this alongside Window Replacement in Garden Grove so the trim and flashing get done in one pass.
What Metal Roofing Costs in Garden Grove, CA
A full metal roof install in Garden Grove runs $15,000 to $40,000, and the spread comes down to five things. Here’s what moves the number:
- Roof size and pitch. A simple gable on a 1,200-square-foot ranch sits at the bottom. A complex roof with multiple hips, valleys, and dormers pushes toward the top because every transition is hand-work.
- Existing roof condition. If the decking is sound, we’re in and out. If rotted sheathing and old flashing need replacement, add a few thousand dollars.
- Material choice. Exposed-fastener panels sit at $15,000 to $22,000 on most homes. Standing seam and stone-coated metal tile climb into the $25,000 to $40,000 band.
- Detached structures. A workshop or oversized garage adds square footage, and if we’re re-roofing it at the same time, the combined job prices better than two separate visits.
- Permit scope. A straight re-roof is a simpler permit than one that adds structural work or a new roof over a converted patio.
What a written estimate includes: tear-off, haul-away, underlayment, flashing, panels or tile, ridge venting, permit fees, and the workmanship guarantee. What it doesn’t always include: decking replacement if rot is found, fascia repair, or a new gutter system. Those get priced as line items you approve before any work starts, so the number you sign is the number you pay. Call (888) 578-4462 and we’ll come out and put real numbers on paper.
See the difference
Before
After
Before
After
Before
AfterWhat Garden Grove Homes Specifically Do to a Metal Roofing Job
Garden Grove’s housing stock shapes this job in ways a generic roofer won’t mention. The city is mostly 1950s-to-1970s single-story ranches on slab foundations with original stucco and wood-framed patios added over the decades, and the tight lots in the 92844 and 92843 ZIPs near the Little Saigon core mean side yards and back structures squeeze right up to the property line. That changes everything from where we stage materials to how we get a ladder and a lift around a mature citrus or ficus in a five-foot setback.
Another thing we see constantly: backyard structures and room additions built first and permitted later. When we pull a permit for the roof, the inspector looks at the whole residence, and undocumented conversions in those blocks get scrutiny. We walk the structure before quoting so there are no surprises mid-job. And the fall Santa Ana winds drive embers and dry out exposed fascia, which is a real reason homeowners along the Garden Grove corridor move toward metal in the first place. If the roof is one piece of a larger project, it’s worth reading our Roofing in Garden Grove page and the broader Roofing service overview.
Serving Garden Grove, CA – Our Local Coverage Area
We serve Garden Grove and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Garden Grove
Most Garden Grove metal roofs take three to six working days once materials arrive. A simple single-story ranch is closer to three; a home with multiple hips, valleys, or a detached workshop runs longer. Call (888) 578-4462 for a schedule estimate tailored to your roof.
Yes. A re-roof requires a permit and an inspection here. We pull the permit, handle the inspection scheduling, and include the fee in the written quote. Call (888) 578-4462 and we’ll walk you through what the city requires for your specific property.
In most cases yes. Metal is lighter than clay tile and about comparable to asphalt, so it usually goes on existing sheathing without structural changes. We confirm that during the on-site walk. Call (888) 578-4462 to schedule the assessment.
Expect $15,000 to $40,000 for a full residential install, with the typical ranch landing around $18,000 to $28,000. The spread depends on roof size, pitch complexity, deck condition, and the panel or tile profile you choose. Call (888) 578-4462 for an exact quote – estimates are free.
You get both the manufacturer’s product warranty and our 730-Day Done Right Promise on the installation. That covers workmanship, not just materials, and we hand it to you in writing at closeout. Call (888) 578-4462 to talk through what’s covered.
Get a Free Metal Roofing Estimate in Garden Grove
We’ll come out to your Garden Grove property, measure the roof, walk the deck, and hand you a written line-item estimate with the panel choices and their prices. No pushy sales call. When you’re ready to price it, call (888) 578-4462 and we’ll find a time that works – a live person answers around the clock.
Written by the team at Groundwork Construction Co.