Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Santa Ana: What It Costs and How Long It Takes
Metal roofing in Santa Ana runs $15,000 to $40,000 for most homes, and a full tear-off and install takes five to ten working days once permits clear. The range is wide because the job is really two projects in one: putting on the panels, and dealing with whatever the old roof was hiding. Call (888) 578-4462 for a free on-site estimate. We’ll measure the roof, check the decking, and give you a written line-item number before anything gets ordered.
How a Metal Roofing Job Actually Runs, Start to Finish
Five stages, and you’ll know which one you’re in at every point.
Day 1: tear-off and deck inspection. We strip the old roofing down to the sheathing. On a 1920s bungalow, that’s where surprises show up – soft planks, old skip sheathing, sometimes a second layer someone nailed over the first. You see the deck yourself before we cover it. If boards need replacing, that’s a line item you approve before we continue.
Days 2 to 3: structural prep and underlayment. We replace bad sheathing, re-nail where needed, and install a high-temp synthetic underlayment. Metal roofs get hotter than asphalt or tile, so the underlayment has to be rated for it. On Santa Ana hillside properties, this is also where we confirm fire-rated assembly details you’ll want for wildfire season.
Days 3 to 6: panel installation. Panels go up in sequence, starting from the eave. Standing seam panels run long and get seamed as we go; exposed-fastener panels screw down through pre-drilled holes. This is the longest stage and the one most affected by wind – Santa Ana winds can shut a install day down, and we’d rather pause than install panels that catch a gust.
Days 6 to 8: flashing, trim, and penetrations. Ridge caps, valleys, pipe boots, skylight curbs, and wall flashing. Most leaks in metal roofs come from flashing, not panels, and this stage is where a cheap job and a good one diverge.
Days 8 to 10: inspection and cleanup. The city inspects the finished assembly – Santa Ana requires a permit for reroofing, and metal adds a few inspection points asphalt doesn’t. Then we magnet-sweep for screws and nails. Twice.
What you decide and when: panel profile and color at the estimate, deck-repair scope on day 1 when we see the framing, and fastener style by day 2. Everything else is ours.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Standing seam vs. exposed fastener. Standing seam has concealed fasteners, cleaner lines, and a lifespan measured in decades – typically the high end of the $15,000 – $40,000 range. Exposed-fastener panels (screw-down corrugated or ribbed) cost less and install faster, but the washers under those screws harden over time and can leak after 15 to 20 years. On a modest post-war tract roof, exposed fastener makes sense. On a Spanish Colonial Revival you plan to keep, standing seam does.
- Panel material. Galvalume steel is the workhorse: strong, mid-priced, and it takes paint well. Aluminum costs a bit more but doesn’t rust, which matters near the coast. Copper is beautiful and expensive – usually 2 to 3 times steel – and develops a patina that some love and some don’t.
- Finish. Kynar 500 paint systems hold color for decades; cheaper polyester finishes chalk and fade in Santa Ana’s hot summers. Ask what the finish is rated for, not just what it looks like on a sample.
- Profile and color. Standing seam in a low-profile rib reads modern. A bolder rib on a Craftsman looks out of place. Santa Ana has no blanket color restriction, but some neighborhoods and HOAs have opinions – we’ll flag it before you commit.
- Fire rating. Metal assemblies are Class A fire-rated, which matters on the hillside properties above town where defensible space rules kick in.
What Metal Roofing Costs in Santa Ana, CA
Most Santa Ana metal roof installations fall between $15,000 and $40,000. Five things push a job toward one end or the other:
- Roof size and pitch. A small bungalow roof is a fraction of a two-story roof with multiple planes. Steep pitches slow the crew and add labor.
- Deck condition. A solid deck is a straight install. Rot, old skip sheathing, or an existing second layer adds tear-off labor and new material.
- Panel choice and material. Standing seam and copper sit at the top. Exposed-fastener steel with a standard finish sits at the bottom.
- Complexity. Dormers, valleys, chimneys, and skylights mean flashing detail work – the part that takes time and skill.
- Permit and inspection scope. Reroof permits in Santa Ana include inspection points, and if your home was built in the 1920s, the inspector may ask about structural attachments.
A written estimate from us lists tear-off, decking replacement allowance, underlayment, panels, trim, flashing, permit fees, and cleanup as separate lines. What it won’t include is what we can’t see until the roof is open – that’s why we quote deck repair as an allowanced line rather than pretend it doesn’t exist. The number you see is the number you pay, and anything that changes gets approved by you first.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Ana Homes Do to a Metal Roofing Job
Santa Ana’s housing stock runs from 1920s bungalows to 1960s tract homes, and each era creates its own problems up on the roof. In the city’s older core and neighborhoods like Lacy and French Park, the original roof framing was built for lightweight wood shingles, not metal. Some of those homes are under historic preservation review, which means we check before assuming a panel profile or color is allowed. In Wilshire Square, we regularly find roof structures that were modified by an unpermitted addition – and the inspector will want that resolved before sign-off.
The climate helps on scheduling: Santa Ana’s semi-arid summers mean rain rarely stops the job, unlike coastal cities where a wet spring can stretch a roof out for weeks. The trade-off is Santa Ana winds, which make tall panel installs unpredictable in fall and winter. Fire is the other factor – Class A assemblies and clean flashing matter on hillside properties above town where wildfire season is real.
We work throughout Santa Ana, including 92705 and the surrounding ZIPs. For the wider scope of a full project, see our Roofing in Santa Ana page, or check our Roofing service hub. Homeowners often pair this with Window Replacement in Santa Ana when an older home needs both roof and windows upgraded in the same year, and Impact Windows & Doors in Santa Ana where storm and fire resilience is the priority. You can see the full list of what we cover in Santa Ana.
Serving Santa Ana, CA – Our Local Coverage Area
We serve Santa Ana and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Metal Roofing in Santa Ana
Most jobs take five to ten working days from tear-off to final inspection. Simple single-story roofs land near five; larger or complex roofs with dormers and valleys run closer to ten. Permit turnaround adds time before we start – call (888) 578-4462 for a schedule estimate on your specific roof.
Yes. Reroofing requires a permit and inspection, and metal assemblies add inspection points that asphalt doesn’t. We pull the permit and schedule the inspections – it’s part of the written estimate, not a surprise add-on.
In some cases, yes, but not with metal. Metal panels need a flat, solid deck, so we recommend a full tear-off and deck inspection. On a 1920s home, that inspection is the whole point – it’s where we find soft sheathing before it becomes a leak.
Most jobs run between $15,000 and $40,000, depending on roof size, deck condition, panel type, and complexity. Standing seam and copper sit at the top; exposed-fastener steel sits lower. Call (888) 578-4462 for a free on-site estimate with line-item pricing.
Panel manufacturers typically warranty their finish for decades, and our workmanship is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. We’ll hand you the written warranty terms before you sign anything.
Get a Free Metal Roofing Estimate in Santa Ana
Call (888) 578-4462 to schedule a free on-site estimate for metal roofing in Santa Ana. A live person answers, day or night. We’ll measure your roof, inspect the deck, and walk you through panel options and a written line-item price – no pressure, no vague ranges. You’ll know exactly what the job costs before you commit, and it’s backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.