Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does New Window Installation Cost in Irvine?
New window installation in Irvine typically runs $4500 to $15000 for a standard replacement project, with most single-family homes landing around $7000 to $11000 for six to ten windows in mid-grade vinyl or aluminum frames. Impact-rated windows, which many Irvine homeowners choose for fire-zone and noise reasons, push the same job to $8000 to $25000. Whole-home projects with premium wood-clad or fiberglass frames from Andersen or Marvin can climb past that range, especially on Irvine’s two-story homes and hillside lots.
We’re Groundwork Construction Co. of Irvine, and we quote window work the same way we quote everything else: with real numbers up front and no surprises at the end. Every project we take on is covered by our 730-Day Done Right Promise, and our technicians bring up to 12 years of experience to each install. If you want a firm number for your specific house, call (888) 578-4462 and we’ll set up a free estimate.
New Window Installation Cost Breakdown (2026)
Here’s what the line items look like across a typical Irvine installation. These ranges reflect Orange County material pricing and local labor rates for 2026, not national averages.
| Line Item | Typical Cost in Irvine |
|---|---|
| Standard vinyl window replacement (per window, installed) | $450 – $850 |
| Aluminum frame replacement (per window, installed) | $500 – $900 |
| Fiberglass or wood-clad replacement (per window, installed) | $900 – $1,800 |
| Impact-rated window (per window, installed) | $800 – $2,400 |
| Full standard window replacement project (whole home) | $4,500 – $15,000 |
| Full impact window project (whole home) | $8,000 – $25,000 |
| Frame rot or water damage repair (per opening) | $300 – $1,200 |
| Stucco repair and patching around new opening | $250 – $900 per window |
| Permit and inspection fees (City of Irvine) | $250 – $850 |
| Interior trim and drywall finish | $150 – $450 per window |
What drives the price up or down? Material choice does the most. A single-hung vinyl unit lands well below a wood-clad casement of the same size from Andersen or Marvin, and that gap multiplies across twelve openings. After material, the two biggest variables in Irvine are window count and structural condition. A straight swap into existing framing is the cheapest version of this job. The moment we open a wall and find rotted headers, cracked stucco, or a sliding-door-to-window conversion that needs header work, the number moves.
We pull real numbers from real houses on every estimate. Nothing on our pricing is estimated from a chart. The number you see is the number you pay, backed in writing with our 730-Day Done Right Promise, and the project stays aligned to the trade we were hired for, which is exactly how home improvement work should run.
What Affects New Window Installation Pricing in Irvine
Every Irvine quote we write depends on a handful of local realities. Here’s what actually shifts the number.
- Window type and frame material. Single-hung vinyl sits at the low end. Casement, awning, bay, and picture windows cost more because they carry heavier hardware and tighter assembly. Wood-clad frames from brands like Andersen add a premium, and fiberglass sits between vinyl and wood in cost.
- Impact rating. Many Irvine homes sit in or near wildland fire zones, particularly up toward Shady Canyon and the Turtle Rock edges. Impact-rated glazing and tempered glass carry a higher unit cost, but they add fire resistance and cut exterior noise from nearby freeways. That trade-off matters more here than in most of Southern California.
- Home age and stucco condition. Irvine has a wide spread of housing stock. Homes in Woodbridge and El Camino Real date to the 1970s and 1980s, while newer builds in Great Park and Orchard Hills go up much faster. Older stucco often needs patching after window removal, and older framing sometimes needs repair. That’s where unexpected costs hide.
- Number of openings. Single-window work is priced per unit. Six windows get a bundle discount. Twelve to twenty openings get the best per-window rate because setup and tear-down costs spread across the job.
- Access and story count. Two-story homes and hillside properties need scaffolding or lift equipment. That labor upcharge is real, especially on the narrow lots around Newport Coast connections and older Irvine villages where equipment access is tight.
- Permit requirements. The City of Irvine requires permits for window replacement that changes the opening size or affects structural framing. Straight same-size swaps often skip the permit, but impact windows and egress windows almost always need inspection. We pull permits and handle the inspection when required.
Climate matters too, in a way most cost guides skip. Irvine’s hot, dry inland summers and mild winters mean UV exposure is brutal on window seals. Old glazing in a north-facing Great Park home will fog and lose its argon within ten to twelve years. That seal failure shows up as cloudy glass, and it’s the exact reason a lot of Irvine homeowners end up calling us for a project they didn’t plan. If you’ve been putting off a replacement because the old units still technically open and close, the energy loss and seal rot are already eating into your monthly bills.
How to Save on New Window Installation
Window replacement is one of those jobs where a small decision upfront saves real money. Here’s what actually works in this market.
- Bundle the whole house. Order every window you need in one project instead of piecemeal. You’ll cut per-window labor and setup time, and you’ll lock in a single permit pull. Six windows at once almost always beats six separate one-window calls.
- Time it for slower months. Late fall and early winter are the slowest stretches for exterior work in Irvine. Contractors have more flexibility on scheduling and pricing then. Spring is the busiest, so you’re competing for slots.
- Stay with standard sizes where you can. Custom frame sizes cost more, and they sometimes need extra fabrication time. Standard sizes install faster and price lower.
- Fix underlying issues first. If you know a window has water damage around the frame, address it before install. A repair done in advance costs far less than stopping midway through a job to rebuild a header.
- Take the financing. Our 0% financing for 18 months spreads a $12000 window project into a payment you can manage. If your project lands over $10000, we also take $1,000 off. Those two offers together can bring a full-home replacement into a comfortable budget.
Free project estimates come with a real design consult. When you call, we walk the house, measure properly, and give you a written number. No vague “somewhere around X.” You’ll know exactly what your project costs before you sign anything. Reach us at (888) 578-4462.
FAQs – New Window Installation Cost
How much does new window installation cost in Irvine?
Most Irvine homes spend $4,500 to $15,000 on a whole-home window replacement. Impact-rated projects run $8,000 to $25,000. A single window with installation sits around $450 to $1,800 depending on material. Call (888) 578-4462 for an exact quote based on your openings, and estimates are free.
Is it cheaper to repair or replace windows in Irvine?
Replacing a window wins once it’s failed: a broken seal, a cracked frame, or a sash that won’t close. Repair makes sense for one bad window in a set of otherwise-sound units, where a broken balance or a failed hinge costs $150 to $400 to fix. If most of your windows are over 15 years old and fogging, replacement is usually the cheaper option over time. Call us for a free opinion on your specific windows.
Do impact windows cost more in Irvine?
Yes. Impact-rated windows run about 20% to 40% more than standard units, putting a whole-home project in the $8,000 to $25,000 range. They earn that premium in Irvine with fire resistance on wildland-adjacent lots, noise reduction from nearby freeways, and lower insurance premiums. Call (888) 578-4462 to find out which of your windows actually need impact glazing.
How long does a window installation take?
Most Irvine projects finish in 1 to 3 days for a whole-home job once windows arrive. Single-window installs are often done in one visit. The bigger delay is fabrication: impact windows and custom frames can take 4 to 8 weeks to arrive. Standard vinyl runs faster.
Are permits required for window replacement in Irvine?
It depends on the change. Same-size swaps usually don’t need a permit, but projects that alter the opening size, add egress windows, or install impact-rated units often do. Permit fees in Irvine typically run $250 to $850. We handle the permit and the inspection when the job requires it, so you’re not the one chasing paperwork.
Got a window project in mind? Backed by our 730-Day Done Right Promise, our background-checked and uniformed technicians handle every install, and every call reaches a live person 24/7 – no voicemail black holes. If you’re planning a broader upgrade, our Irvine service area page covers the full scope of what we build for homeowners here, from windows and doors to kitchens and additions. When you’re ready, call (888) 578-4462 for a free estimate and design consult.
Pricing reflects the Irvine market as of 2026. Groundwork Construction Co. of Irvine offers free estimates – call (888) 578-4462.
What Our Customers Say
"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson