Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Irvine, CA
A tub-to-shower conversion in Irvine typically runs $6,500 to $16,000 for a full tear-out and rebuild, and most conversions finish in three to seven working days. That range covers removing the old tub, reworking the drain and valve, waterproofing, new tile or a solid-surface surround, a shower pan, glass, and fixtures. The final number depends on size, tile choice, and whether the job exposes plumbing or framing problems behind the wall.
We’re Groundwork Construction Co., and conversions are one of the most common jobs we run in Irvine. Plenty of homes here were built with a standard tub in the hall bath or primary suite, and the people living in them want a walk-in shower more than they want a place to soak. If that sounds like your house, call us at (888) 578-4462 and we’ll set up a free estimate and design consult. This work sits inside our larger Bathroom Remodeling in Irvine service, and every conversion is backed by our 730-Day Done Right Promise.
Why Irvine Homeowners Are Replacing Tubs With Showers
Tub-to-shower conversions make sense for a few specific reasons, and most Irvine homeowners land on one of them. The first is mobility. A parent or in-law who can no longer step over a 15-inch tub apron needs a low-threshold or curbless shower, and that’s a code-adjacent safety issue, not just a preference. The second is wasted space. A 60-by-30-inch alcove tub eats the floor footprint of a small Irvine Hall of Fame or Woodbridge bathroom, and a shower opens that space up for a bench, a niche, and a place to actually stand and dry off.
The third is water use. Irvine sits in a semi-arid climate with strict conservation habits, and a shower uses a fraction of the water a full tub soak does. The fourth is resale. Walk-in showers photograph better and, in Irvine’s $80K to $200K+ household income bracket, buyers expect one in the primary bath. We’ve torn out plenty of tubs in Turtle Rock and Northwood that were original to the build and hadn’t been filled in years. When that’s the case, converting just makes sense.
When You Need Tub-to-Shower Conversion
Not every bathroom needs a full rebuild. Here are the scenarios where a conversion is the right call rather than a tub repair or a cosmetic refresh.
- Someone in the house can’t safely step over the tub. A high tub apron is the single most common fall risk in an Irvine bathroom, and a low-threshold shower removes it. If a family member is aging in place or recovering from surgery, the conversion should happen before the first near-miss, not after.
- Your tub is original to a 1970s or 1980s Irvine build and it’s failing. In neighborhoods like El Camino Real and Rancho San Joaquin, we regularly pull tubs that have cracked, chipped, or lost their enamel, and the subfloor underneath is often soft from a slow leak. Converting is cheaper than a full tub-and-tile replacement in most of these cases.
- You want a shower but a tub-heavy bathroom wastes your square footage. A hall bath shared by two kids doesn’t need a soaking tub. Turning it into a generous walk-in shower with a built-in bench gives the household more usable function from the same footprint.
- You’re updating before a sale or a refinance appraisal. Irvine buyers in this market expect a modern primary shower. A conversion is one of the highest-return bathroom upgrades you can make, and it photographs well for listings.
- The tile, grout, and caulk around the tub are done. When water has been getting behind the surround for years, the drywall and backer board are already compromised. A conversion is the point where we open it up, fix the water damage, and build it back correctly.
- You want better water pressure and a lower water bill. Modern thermostatic valve and rain-head setups from a brand like Grohe deliver a shower you actually enjoy while using less water than filling a tub. Irvine’s water rates make that a real, ongoing savings.
Our Tub-to-Shower Conversion Process
Every conversion follows the same sequence. Here’s what actually happens from the day we walk through your door to the day you take your first shower in the new one.
- Free estimate and design consult. We measure the space, inspect the existing drain and valve, listen to how you use the bathroom, and put together an upfront price. The number you see is the number you pay. We bring material samples so you can pick tile, a shower pan, and fixtures on the spot rather than guessing from a catalog.
- Tear-out and inspection. We pull the tub, surround, and any rotted drywall. This is when we find out what’s actually behind the wall: old galvanized pipe, a failing drain gasket, soft subfloor from a long-term leak. Anything unexpected gets flagged and priced before we touch it, never sprung on you at the end. Irvine homes from the 1970s and 1980s commonly need the drain reworked to meet the current shower pan slope, so we plan for that up front.
- Rough-in and waterproofing. We reposition the drain to a center point, install a new valve and thermostatic mixing, and then waterproof. That means a sloped shower pan, cement or foam backer board, and a bonded sheet membrane or a liquid-applied system. Irvine uses a published plumbing code with specific shower pan slope and drain requirements, and we build to it. Waterproofing is done right here or it fails five years later.
- Tile, surround, and finish work. We set the tile or install a solid-surface surround, add niches and a bench if the design calls for them, and install the shower door and hardware. Glass, tile, and trim go in after the waterproofing has fully cured, not before.
- Glass, fixtures, and final walkthrough. We install the shower head, controls, and glass enclosure, test for leaks, clean up, and walk you through everything. Then we hand you the 730-Day Done Right Promise in writing. If something isn’t right, we make it right.
Most Irvine conversions take three to seven working days, and we stage the work so your plumbing stays usable as long as possible. That matters if this is your only shower.
Tub-to-Shower Conversion Pricing in Irvine
A tub-to-shower conversion in Irvine typically costs $6,500 to $16,000, with most of our Irvine jobs landing in the $9,000 to $13,000 range. That spread is driven by tile choice, shower size, and what we find behind the wall. Here’s the line-item breakdown so you can see where the money goes.
| Item | Typical Irvine range |
|---|---|
| Tear-out, haul-away, and site protection | $400 – $900 |
| Plumbing rough-in (drain relocation, valve replacement) | $900 – $2,200 |
| Waterproofing (sloped pan, backer board, membrane) | $1,200 – $2,800 |
| Tile and surround (material plus labor) | $2,000 – $6,500 |
| Shower door and glass enclosure | $800 – $2,500 |
| Fixtures (showerhead, valve trim, drain cover) | $400 – $1,800 |
| Permit and inspection (where required) | $0 – $600 |
What moves you up or down that range? Tile is the biggest lever. A standard 12-inch porcelain runs considerably less than a large-format slab or a hand-set mosaic over the whole wall. Bench and niche additions add to labor. Converting to curbless is more involved than a low-threshold pan because the floor itself has to be modified. A pre-existing water leak that’s softened the subfloor adds repair to the scope. And if you want a rain head and thermostatic valve from a brand like Grohe, budget for it up front rather than adding it mid-job.
We keep the pricing honest and front-loaded. Upfront pricing, no surprises. The estimate is free, and if you want to spread the cost, we offer 0% financing for 18 months plus $1,000 off projects over $10,000. Call (888) 578-4462 to get a number for your specific bathroom.
What to Check Before You Schedule a Conversion
Before you commit to a conversion in an Irvine bathroom, there are a few things worth knowing first. Check whether your bathroom is on a slab or a raised floor, because that affects drain relocation and cost. Check the age of the existing valve and supply lines, because a 40-year-old galvanized drain line is worth replacing while the wall is open. Check whether your HOA has any restrictions on exterior window or fixture changes, since Irvine has plenty of HOAs and a few of them have opinions. And check whether you actually have the space for the shower footprint you want: a 60-inch alcove converts easily, but a 30-inch-wide hall bath may need a different door type or a compact bench.
It’s also a good moment to decide whether you want a broader refresh. If the vanity, toilet, lighting, or flooring are all original too, folding those into one project usually costs less than coming back later. That’s exactly what our home services are built for: one contractor, one schedule, from foundation to finish line. If you’re only doing the shower, that’s fine too. We scope the work to what you actually need.
Tub-to-Shower Conversion vs. a Tub Liner or Reglaze
A liner or reglaze costs far less, but it doesn’t change the tub’s height, footprint, or drain, and it won’t fix water damage behind the wall. It’s a cosmetic patch on a functional problem. If you want a walk-in shower, only a true conversion gets you there. And if the honest answer is that a liner makes more sense for your budget this year, we’ll say so. We’d rather tell you that than sell you a conversion you don’t need.
Why Groundwork Construction Co. for Your Irvine Conversion
We’ve been in business since 2014 and have served local communities for over 42 years, and conversions are steady work for us across Irvine. Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives in uniform. That’s a brand commitment, not a sales line: no mystery crews, no one showing up in an unmarked van.
We also source materials from a curated set of verified brand partners across every trade, and that carries over to bathrooms. You’ll see names like Grohe for shower valves and trim, and we bring material samples so you can pick tile and finish quality rather than settling for whatever’s in stock. We’re the group that answers the phone with a live person, 24/7, which means when your shower valve starts dripping at 9 p.m. on a Sunday, someone picks up.
And the work is backed in writing by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If the waterproofing fails, the tile pops, or the door hangs wrong, we come back and make it right. That’s the difference between a contractor who’s selling you a job and one who’s standing behind it.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Irvine?
A tub-to-shower conversion in Irvine typically costs $6,500 to $16,000, with most jobs landing between $9,000 and $13,000. Tile choice, shower size, glass, and any hidden water damage drive the final number. Call (888) 578-4462 for an exact quote, and estimates are free.
How long does a tub-to-shower conversion take?
Most Irvine conversions take three to seven working days once work starts. The timeline depends on tile curing and how much plumbing rework is needed behind the wall. If we find damaged subfloor or old drain lines, that adds a day or two, and we flag it before we proceed. Our team plans the schedule so you keep plumbing access as long as possible.
Do I need a permit for a tub-to-shower conversion in Irvine?
In most cases yes, because a conversion moves the drain and changes the valve, which is plumbing work that requires a permit and inspection. Irvine uses a published plumbing code with specific shower pan slope and drain requirements, and a permitted job protects you at resale. We handle the permit and inspection as part of the scope and build to code. Call (888) 578-4462 to talk through the specifics of your bathroom.
Is a walk-in shower or a tub better for resale in Irvine?
For a primary bath in Irvine, a walk-in shower is generally the better resale move because buyers in the $80K to $200K+ income bracket expect one. For a hall bath shared by kids, a tub still has value. The right answer depends on which bathroom you’re converting and who uses it. We’ll walk you through both options at the free estimate, or explore our full Bathroom Remodeling service for the bigger picture.
Ready to replace the tub with a shower you’ll actually use? Call Groundwork Construction Co. of Irvine at (888) 578-4462 for a free project estimate and design consult. We’ll measure the space, price it upfront, and put the work in writing with our 730-Day Done Right Promise. Live person, 24/7.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine.