Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Newport Beach, CA: What It Takes and What It Costs
A tub-to-shower conversion in Newport Beach runs $3,500 – $10,000 and takes most homes 3 – 5 working days once materials are on site. The job means pulling the old tub and its surround, reworking the drain and valve rough-in, waterproofing the wet zone, and setting a new shower pan and walls in the same footprint. Most Newport Beach conversions land in the $5,500 – $8,000 middle because coastal homes need extra waterproofing care. Call (888) 578-4462 for a free on-site estimate.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
Here’s the real sequence. Timelines assume the footprint stays put and no framing surprises turn up behind the tile.
Stage 1: Site protection and demolition (day 1)
We protect the flooring and hallway, shut the water at the fixture stops, and pull the tub, surround, and any old backer. Old cast-iron tubs on Balboa Island and the Peninsula are heavy and often come out in pieces. This is the stage where we find out what the last remodel hid: rotted subfloor, a failed flange, or a copper line someone notched too deep.
Stage 2: Rough-in and framing adjustments (day 1 – 2)
Your decision point: keep the drain centered or shift it, and keep the valve location or raise it. Moving the drain a few inches is routine; moving it across the room isn’t. We set the new drain, adjust blocking for grab bars or a bench, and swing the valve to the height you want. Plumbing and any new electrical for lighting gets inspected here if your permit scope calls for it.
Stage 3: Waterproofing (day 2 – 3)
This is the stage coastal homes live or die by. We install a bonded waterproof membrane over the walls and pan, with a pre-sloped pan and a proper curb. The membrane gets a flood test, then we wait. Skipping this step is the most common reason a shower fails in a salt-air, high-humidity house two winters later.
Stage 4: Tile, glass, and trim (day 3 – 4)
Wall tile and floor tile go in, then grout and sealant. Glass gets templated once tile is set, so expect a gap of a few days if you’re going frameless. Fixtures, valve trim, and the showerhead go on at the end of this stage.
Stage 5: Final inspection and walkthrough (day 4 – 5)
We test the drain, check for leaks at every connection, clean up, and walk the job with you. Any punch list gets handled before we call it done. The whole thing is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Between (and What Each Costs You)
Most of your decisions happen in the first week, before we order. Here’s the honest trade-off on each:
- Acrylic or fiberglass shower pan and walls: the budget option at $1,200 – $2,500 in materials. Fast to install, low maintenance, but it looks like a hotel shower and can flex underfoot on an uneven subfloor.
- Tile over a bonded membrane: $2,500 – $6,000 in materials depending on tile. This is what most Newport Beach homeowners pick. It holds up to salt air and lets you match the rest of the bath. Grout needs sealing every few years.
- Frameless glass vs. framed: frameless runs $900 – $2,000 more. It shows the tile better, but it needs a perfectly plumb wall, and on a 1950s Balboa cottage that can mean extra framing work.
- Curbless vs. curbed entry: curbless looks clean and suits aging-in-place, but it needs the floor recessed or the whole shower raised on a mud bed. Add $800 – $1,800 for the structural and drain work.
- Fixtures: Kohler and Moen both make solid valve-and-trim packages. Cheap builder-grade valves are the first thing to fail.
- Ventilation: a properly sized exhaust fan is not optional in a marine-layer house. Add $200 – $450 if yours is undersized or missing.
What Tub-to-Shower Conversion Costs in Newport Beach, CA
The full range runs $3,500 – $10,000. A typical mid-grade tile conversion with a new valve and glass door lands in the $5,500 – $8,000 band. Here’s what pushes a job toward either end:
- Footprint size: a standard 60-inch alcove is the baseline. A larger walk-in footprint adds tile, glass, and labor.
- Condition behind the wall: old cast-iron drains, rotted subfloor, or a notched joist can add $500 – $2,000 in repair.
- Plumbing or electrical moves: drain relocation and new lighting each add $300 – $1,200.
- Material grade: acrylic versus large-format tile versus slab is the single biggest swing.
- Permit scope: if your conversion touches plumbing or electrical, the permit and inspection cycle adds time and a fee.
A written estimate from us spells out demo, framing, waterproofing, tile, glass, fixtures, and cleanup line by line. What it won’t include unless we flag it: structural repair behind the wall, and glass if you’re going frameless (templated after tile).
See the difference
Before
After
Before
After
Before
AfterWhat Newport Beach Homes Specifically Do to This Job
Newport Beach housing stock sets the terms on most conversions. On Balboa Island, the Peninsula, and in Cannery Village, we’re usually working in 1920s-to-1950s beach bungalows and cottages where the tub was set over a wood subfloor, the drain is original cast iron, and the wall behind the tile is lath and plaster. That means the waterproofing stage matters more than it would on a newer inland house, because marine-layer humidity and salt air work on any wood and fastener that stays damp. Bayfront and oceanfront properties also get moisture pathing from outside, so we plan the shower especially to drain and dry. Coastal Commission review, the city’s coastal and bayfront zoning overlays, and Peninsula/Balboa flood and seawall constraints shape the broader remodel this job often sits inside, though a straight tub swap in the same footprint usually stays on the lighter permit path. If your project grows into tile elsewhere on the property, homeowners often pair this with Tile Roofing in Newport Beach or Metal Roofing in Newport Beach while crews are already staged on a tight lot. And for a wider scope, the project becomes part of a Bathroom Remodeling in Newport Beach, which is where we handle vanities, lighting, and flooring together. We cover all of Newport Beach, from 92663 down through the Peninsula and island ZIPs, and you can see the full scope of our Bathroom Remodeling service.
Serving Newport Beach, CA – Our Local Coverage Area
We serve Newport Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Newport Beach
Most conversions take 3 – 5 working days of on-site work, plus a few days of drying and glass templating. If the footprint stays the same and materials are ready, a one-week calendar window is normal. Call (888) 578-4462 for a schedule based on your specific bathroom.
Yes, if your conversion moves plumbing, the drain, or electrical, a permit and inspection are typically required. A straight fit in the same spot with no rough-in changes sometimes qualifies as cosmetic, but we confirm with the city before assuming that. We pull permits and pass inspections as part of the job.
Usually yes, and that’s the most common scope. The tub drain and valve can often stay in place with a new pan and shower valve in the same location. Moving the drain more than a few inches or going curbless is what pushes the job into structural work.
It runs $3,500 – $10,000, with most Newport Beach homeowners landing between $5,500 and $8,000. Tile selection, glass, and what’s behind the old wall move that number most. Call (888) 578-4462 for an exact written estimate, free.
Every tub-to-shower conversion we do is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If it’s not done right, we make it right, in writing.
Get a Free Tub-to-Shower Conversion Estimate in Newport Beach
Call (888) 578-4462 to schedule a free on-site estimate for your tub-to-shower conversion in Newport Beach. We measure the bathroom, check what’s behind the old tub, and hand you a written line-item plan with the real price, so there’s no surprise once demo starts. Calls are answered by a live person 24/7, and our background-checked, uniformed technicians show up ready to work. Upfront pricing, no surprises.
Written by the team at Groundwork Construction Co.