Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Tustin, CA: What It Costs and How Long It Takes
A tub-to-shower conversion in Tustin typically runs $3,500 to $10,000 and takes about 5 to 10 working days once demolition starts, depending on whether plumbing has to move. The job means pulling the tub and its surround, reworking the drain and valve, then building a waterproofed shower in the same footprint. Call (888) 578-4462 and we’ll look at your bathroom and put a written, line-item number in front of you.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
Most homeowners picture a crew showing up and a shower appearing. The real sequence has five stages, and each one asks you to make a decision before we move forward. Here’s what a Tustin conversion looks like from the inside.
Stage 1: Site visit and written scope (day 1, about 90 minutes)
We measure the alcove, open the access panel or look under the tub, and check the drain location, the valve rough-in, and whether the wall behind the surround is drywall or mortar bed. You decide the shower footprint (standard 60-inch alcove or a narrower build), the pan material, and the wall finish at this stage. Every number goes in writing before anyone swings a hammer.
Stage 2: Demo and rough-in (days 1-2)
The tub, surround, and any rotted backer come out. If your valve is original, this is the moment to replace it while the wall is open; there’s no cheaper time. Rough plumbing and electrical for a new light or fan happen here, and if your project touches framing or moves the drain, the inspector comes out before anything gets closed up.
Stage 3: Waterproofing and inspections (days 3-4)
We install the pan, slope it correctly, and apply the waterproofing membrane or a bonded sheet system, then tape and coat the seams. This is the step that decides whether the shower lasts. A 24-hour flood test follows on pans where the code official requires one. Tile goes on a flat, correctly floated substrate, not straight onto drywall.
Stage 4: Tile, glass, and trim (days 5-8)
Wall tile, grout, and any accent band go in, then the shower valve trim, head, and any handheld or niche work. Glass gets templated after the tile sets so the panels fit your opening exactly. You’re choosing grout color and finish here, and that choice affects maintenance more than most people expect.
Stage 5: Final inspection and walkthrough (days 9-10)
We test the drain, check the valve and the fan, clean up, and walk the space with you. Anything that doesn’t meet the plan gets fixed before we hand back the key. Your work is covered by the 730-Day Done Right Promise, which is one of the longest workmanship guarantees in the residential construction space.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Your New Shower
The materials you pick move the price more than the labor does. Here’s how the real choices break down.
- Acrylic or fiberglass pan and walls: fastest install and the lowest price point, around $3,500 to $5,000 all-in. Holds up fine, cleans easily, but the panel seams show and the look reads builder-grade. Good for a rental or a hall bath.
- Tile walls with a prefabricated pan: the sweet spot for most Tustin homes, roughly $5,500 to $8,000. You get real tile choices with a reliable, factory-sloped base underneath.
- Full tile, custom mud-set pan: the top end, $8,000 to $10,000 and up. Best longevity and the most design freedom, but it takes longer and it’s unforgiving of a sloppy installer.
- Frameless glass enclosure: adds $800 to $1,800 and opens up the room visually. Template it after tile, never before.
- Shower niche and bench: a recessed niche runs $150 to $400; a built-in bench adds $400 to $900 depending on how it’s framed and finished.
- Fixtures and finishes: tile grade, grout type, and valve brand swing the number. We work with Kohler and similar brands, so you’re choosing from a curated list rather than whatever’s on the shelf.
What Tub-to-Shower Conversion Costs in Tustin, CA
Plan on $3,500 to $10,000 for the conversion itself, and more if the project grows into a wider bathroom update. Here’s the line-item picture, and the variables that push a job toward one end or the other.
| Item | Typical Range |
|---|---|
| Base tub-to-shower conversion (acrylic) | $3,500 – $5,000 |
| Tile shower with prefab pan | $5,500 – $8,000 |
| Full tile with custom mud-set pan | $8,000 – $10,000+ |
| Frameless glass enclosure | $800 – $1,800 |
| Valve and rough plumbing replacement | $350 – $900 |
| Replacing drywall with waterproof backer | $400 – $1,200 |
| Permit and inspection fees | $250 – $600 |
Five things move the number. Shower size and shape: a standard 60-inch alcove is the cheapest build; a corner or custom footprint adds framing and pan work. Existing condition: if the wall behind the surround is soft or the subfloor is water damaged, we replace it, and that adds real dollars. Moving plumbing or electrical: relocating the drain or adding a fan and light is the biggest single jump. Material grade: acrylic to full tile is roughly a two-to-three-times jump. Permit scope: a straight swap on existing plumbing is a simpler permit than a relocation that triggers rough-in inspection.
Your written estimate includes demo, materials, waterproofing, tile, fixtures, and cleanup. It doesn’t include the glass enclosure if you pick a custom size, unexpected structural repair, or a change in tile after the order is placed. We price the job upfront with no surprises, and if it’s part of a full Bathroom Remodeling in Tustin project, we fold the conversion into a single scope.
See the difference
Before
After
Before
After
Before
AfterWhat Tustin Homes Specifically Do to This Job
Tustin is a two-speed market for this work. Around Old Town and the 92780 ZIP, the housing stock is largely 1950s to 1970s single-story ranch and tract homes with stucco over wood frame, often on slab. Those bathrooms were built for a 60-inch cast-iron or steel tub, so the drain location and the wall cavity behind the tile usually surprise the homeowner. Decades of moisture behind a surround, and a subfloor that’s already seen twenty years of splashing, come up more often on this side of town than in Tustin Ranch.
Out in 92782, a lot of what we see is 1980s to 2000s two-story subdivisions with HOA design review. That review process applies if your conversion changes anything visible from outside, like a window or vent, and it can add weeks before a single nail goes in. Planning around it early saves a lot of headache later.
The dry inland climate matters too. Santa Ana winds and hot summers pull moisture out of framing fast, which is good for drying but hard on original single-pane windows and exterior stucco. Inspections in Tustin follow California code, so a relocated drain gets a rough plumbing inspection and, in most cases, a flood test on a new pan. A homeowner who picks a pan and a tile before we measure usually saves a week of back-and-forth. For a smaller footprint project, homeowners often pair this with Bathroom Remodeling work elsewhere in the same house, or with Tile Roofing in Tustin if the remodel touches the roofline. Others will pair it with Metal Roofing in Tustin when a vent addition changes the roof.
Serving Tustin, CA – Our Local Coverage Area
We serve Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Tustin
Most conversions take 5 to 10 working days once demolition starts, and glass templating can add a few days afterward. The range depends on whether plumbing moves and whether the wall behind the old surround is sound. Call (888) 578-4462 to get a specific timeline for your bathroom.
Yes, in most cases a permit is required, and any project that relocates the drain or alters the plumbing needs a rough-in inspection. A straight swap on the same existing plumbing is a simpler permit. We pull the permits and schedule the inspections, and we’ll tell you upfront whether your project triggers one.
Yes, and that’s the more common and less expensive path. If the drain, valve, and framing stay where they are, the job is mostly demo, waterproofing, and tile. Moving the drain or adding a fan is where a conversion grows in scope. Call (888) 578-4462 for a free on-site look and an honest read on which version your bathroom supports.
It runs $3,500 to $10,000 in Tustin, with acrylic installs at the low end and full tile with a custom mud-set pan at the high end. Glass, valve replacement, and any structural repair sit on top. Estimates are free, and we write the price line by line so you can see where every dollar goes.
Every conversion is covered by the 730-Day Done Right Promise. If something isn’t done right, we make it right. The promise runs the full term regardless of the finish level you choose, and the workmanship warranty covers the installation, not just the materials.
Get a Free Tub-to-Shower Conversion Estimate in Tustin
If you’re done stepping over a tub you never use, call (888) 578-4462. Calls are answered by a live person around the clock, so you’ll reach someone who can book a visit, not a voicemail. We’ll come out, measure the alcove, walk the plumbing and waterproofing plan with you, and leave a written estimate. We cover all of Tustin, including the 92780 and 92782 ZIP codes, at a price that stays where we put it.
Written by the team at Groundwork Construction Co.