Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Irvine: What It Costs and How It Goes
Vanities, tile and fixtures in Irvine typically run $9,000 to $28,000 as part of a bathroom rebuild, and the work itself usually takes 2 to 4 weeks from demo to final walkthrough. A vanity swap alone lands at $800 to $3,000, a walk-in shower at $4,500 to $12,000, and tile labor is billed by the square foot on top of the fixture line items. Call (888) 578-4462 and we’ll walk your Irvine bathroom, talk through the tile and fixture choices, and put a written number in your hands before you commit to anything.
Stage by Stage: How We Handle Vanities, Tile & Fixtures in Irvine Homes
We don’t hand you a three-line bid and show up with a truck. Vanities, tile and fixtures touch plumbing, electrical, waterproofing and finish work, and each one is scheduled and inspected on its own timeline. Here’s the real sequence, and what you decide at each stop.
1. Walkthrough and scope lock (day 1)
We measure the room, check the existing drain and supply locations, and look at what’s behind the current tile. If the vanity is moving, we confirm the wall cavity can take a relocated drain and a GFCI outlet. You make the big calls here: fixture finish, tile format, and whether the layout changes. Most Irvine bathrooms get a written scope within a few days of this visit.
2. Demo and substrate prep (days 2 – 4)
Tear-out usually takes two to three days. Old tile comes off, the vanity and toilet come out, and we open the wall where the plumbing is going to move. What we find behind 30-year-old tile drives a lot of the surprises: rotted framing near the shower pan, a vent stack in the wrong spot, or a floor that needs a new subfloor before anything else goes down. You get a photo and a number before we touch any of it.
3. Rough-in and inspection (days 5 – 8)
Plumbing and electrical get roughed in, then the work gets inspected before a single tile goes up. This stage is where villas, condos and townhomes in Irvine live or die on scheduling, because the inspection has to line up with the association’s rules on work hours and access. You decide vanity height (standard is 32 to 36 inches, and taller for anyone who wants less bending), faucet brand and shower valve style by this point.
4. Waterproofing and tile setting (days 9 – 16)
Shower walls and floors get a bonded waterproofing membrane before tile, not after. A typical 5-by-8 bathroom takes four to six working days of setting and grouting for a 12×24 porcelain floor and a subway or large-format shower wall. Large-format tile (24×48 and up) runs fewer grout lines but demands flatter substrate, which adds a day of floor prep. You approve layout and grout color at the start.
5. Vanity, fixtures and punch list (days 17 – 22)
The vanity goes in, the countertop gets templated and set, and the toilet, faucets, shower trim and mirror go on. If your countertop is natural stone or quartz, templating adds three to five days of lead time you can’t skip, so we schedule it against the tile work. The last day is a punch walk so you can point at anything that doesn’t sit right before we’re gone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Vanities, Tile & Fixtures: The Choices That Actually Matter
Most of the arguments we have with homeowners are really about picking between two things that both look fine online. Here’s the honest version.
- Vanity cabinet material: Furniture-grade plywood and dovetail drawers hold up for decades; particleboard with stapled hardware doesn’t survive a leak. KraftMaid is a solid middle-of-the-road pick if you want a name-brand door style that’ll match.
- Countertop: Quartz (Cambria, for example) is nearly stain-proof and needs zero sealing. Natural stone like marble looks incredible and requires annual sealing, especially with Irvine’s hard water leaving spots.
- Floor tile: Porcelain wins on durability and price, typically $3 to $8 per square foot installed. Natural stone (travertine, slate) runs $8 to $15 installed and adds grout maintenance.
- Shower wall tile: Subway and 3×6 ceramic keep labor down. Large-format or slab tile eliminates grout lines but adds $1,500 to $3,000 in substrate prep and installation.
- Fixtures: Kohler and similar mid-tier brands last 10 to 15 years on average for a faucet. Cheap box-store trim fails at the cartridge first.
- Shower valve and drain: A thermostatic valve with a pressure-balance option is worth the extra $150 to $300; it stops the surprise cold-water jolt when someone flushes the other bathroom.
Irvine runs hard, mineral-heavy water, and it’s hardest on fixtures. Choose brushed nickel or chrome over oil-rubbed bronze if you want to skip the annual mineral-stain scrubbing. Same goes for the shower glass.
What Vanities, Tile & Fixtures Cost in Irvine, CA
The realistic range for a full bathroom’s worth of vanities, tile and fixtures in Irvine is $9,000 to $28,000. That’s not a scare number, it’s the spread between a modest hall bath and a primary suite. Here’s the line-item breakdown so you can see where the money goes.
| Line item | Typical Irvine range |
|---|---|
| Vanity installation | $800 – $3,000 |
| Vanity countertop (templated quartz) | $700 – $1,800 |
| Floor tile (labor + material, 50 sq ft) | $1,200 – $3,500 |
| Shower wall tile (60 sq ft) | $1,800 – $4,500 |
| Waterproofing membrane and prep | $600 – $1,500 |
| New shower valve and trim | $400 – $900 |
| Faucets, drains, accessories | $300 – $800 |
| Plumbing relocation (if needed) | $800 – $2,500 |
What pushes a job toward the high end? Relocating the toilet or moving the drain line, moving electrical for a lit vanity, upgrading to large-format or natural stone, and structural surprises behind the tile. What pulls it back? Keeping the layout, reusing the toilet, and sticking with porcelain floor tile.
Every estimate we give you is written line by line. What’s included: demo, haul-away, substrate prep, waterproofing, tile setting, grout, plumbing and electrical rough-in, fixture install, and cleanup. What’s typically not: the actual fixtures you pick (we list them, you buy them or we buy them), countertop fabrication lead time, and any emergency structural repair.
One important thing on the tile roof side: if you’re also thinking about the exterior, homeowners in Irvine often pair the bathroom work with Tile Roofing in Irvine while scaffolding and roof access are already in play. And if your tile work extends to something more specialized on the roof, Specialty Roofing in Irvine covers that separately.
See the difference
Before
After
Before
After
Before
AfterWhy Irvine Homes Specifically Change This Job
Most construction work in Irvine happens inside village-specific HOAs and design-review boards rather than a patchwork of independent jurisdictions. That means before a single tile gets ordered, your bathroom scope gets read by an architectural committee. Paint colors, tile finishes, exterior fixture styles, and even the timing of dumpster placement can get flagged. The city’s own building division also runs strict plan check, so the plumbing and electrical rough-in inspection is a real gate, not a formality.
The housing stock is overwhelmingly Mediterranean and Spanish-revival stucco tracts from the 1970s and 1980s in Woodbridge, Northwood, and Turtle Rock, plus dense 2000s-era condos near the Spectrum and UCI. In the older tracts, we regularly pull original 1980s tile off a wall and find three problems the last owner never mentioned: drywall softening near the shower pan from slow vapor leaks, a floor substrate that’s sagging under the toilet, and a vent fan ducted into the attic and doing nothing. These are the failure modes you can’t see until the tile is off, which is why we price the inspection into the contract.
If you’re abutting open space on the city’s edges, some properties sit in the WUI zone and fire-hardening rules apply to exterior work; that doesn’t change the bathroom tile, but it does change how we handle any exterior wall penetrations during the rough-in stage. This is why a crew that works Santa Ana or Costa Mesa daily and drops into Irvine on a one-off gets caught out.
If your scope is really a full Bathroom Remodeling in Irvine, we scope that alongside the vanities and tile. If it turns out to include the whole room plus more, our Bathroom Remodeling service detail has the broader picture. We also cover Irvine and the surrounding villages.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Irvine
Most jobs take 2 to 4 weeks from demo to final walkthrough. That window stretches if you’re moving the drain line, waiting on quartz or natural-stone countertop fabrication, or working through a village association’s approval process. Call (888) 578-4462 for a timeline based on your actual room.
Yes, if you’re moving plumbing, electrical, or any structural element, you need a permit through the city’s building division. A straight cosmetic swap (same vanity position, retiling over the same prep) typically doesn’t trigger a permit, but Irvine’s strict plan-check means we confirm before we skip it, and that check is written into the estimate. Call for a permit scope review.
Yes, keeping the existing drain and supply locations is the single biggest money-saver. A vanity refit at the same footprint and a retile that leaves the toilet and shower drain where they are can drop a $9,000 job toward the low end. Call (888) 578-4462 and we’ll tell you in ten minutes whether your layout is worth moving.
The realistic range is $9,000 to $28,000, and where you land depends on square footage, whether you relocate plumbing, tile grade, and countertop material. We put the number on paper line by line, so you’re not comparing one contractor’s bottom line against another’s blank spaces. Call (888) 578-4462 for a free on-site estimate.
Every job comes under our 730-Day Done Right Promise. If the grout cracks, the tile de-bonds, or the fixture fails from install, we come back and fix it.
Ready to Price Vanities, Tile & Fixtures in Your Irvine Home?
We’ll walk your bathroom, talk through real tile and fixture options, and hand you a written estimate with line items you can actually compare. A live person answers the phone 24/7, and the estimate is free. Call (888) 578-4462 to schedule your on-site visit. No surprises on the number, no surprises on the schedule.
Written by the team at Groundwork Construction Co.