Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Stanton, CA: What It Actually Takes
A walk-in shower build in Stanton runs $4,500 – $12,000 for a straight replacement and $9,000 – $28,000 when the job rolls into a wider bathroom remodel, and we usually have the old unit out and the waterproofing in by the end of week one. A curbless, tile-and-membrane custom shower takes longer, roughly two to three weeks start to finish, because the pan has to cure and the tile has to be set and grouted in sequence. Call (888) 578-4462 and we’ll walk the layout with you.
How We Sequence a Walk-In Showers & Shower Remodeling Job
Every walk-in shower we build follows the same five-stage spine, and knowing it ahead of time is what keeps a Stanton homeowner from getting surprised mid-project.
Stage 1: Demolition and rough-in inspection (day 1 – 2)
We pull the old surround or tile, cut the drain to the new location if it’s moving, and inspect the subfloor and framing for rot. In Stanton’s postwar stalls, the mortar bed often hides soft plywood around the drain, so we budget for that. You decide the door type and base footprint before demo starts, because those choices lock the rough dimensions.
Stage 2: Plumbing and valve work (day 2 – 3)
New pressure-balance valve, shower bar or rain head rough-in, and any relocation of the drain line get done and inspected here. If you’re keeping the existing valve and drain location, this stage can be a half-day.
Stage 3: Waterproofing and pan (day 3 – 5)
A Schluter or bonded membrane system goes down over the sloped pan, then we flood-test it overnight. This is the step you never skip. We don’t set a single tile until it passes.
Stage 4: Tile, stone, and glass (day 5 – 10)
Wall tile, niche, and bench go in, then grout cures before the glass shop measures for the enclosure. You pick the tile layout, grout color, and door style by day 4 so the order stays on schedule.
Stage 5: Fixtures, trim, and final walkthrough (day 10 – 14)
Trim kit, seat, grab bars, and glass install. We test drainage, caulk, and hand you the written warranty. Most Stanton jobs close in two visits after the glass arrives.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Pick Between
Nobody builds the same shower twice. Here’s the honest trade-off list.
- Acrylic vs. tile walls. Acrylic surround is faster and cheaper, holds up fine, suits a rental or a quick turn. Tile runs $1,500 – $4,000 more in material and labor but reads far richer and holds resale value on a redeveloped street.
- Curbless vs. curbed base. A curbless walk-in needs a recessed or sloped pan and often a structural tweak to the joist bay, adding roughly $1,200 – $2,800. Worth it for aging-in-place; skip it if the subfloor won’t allow it cleanly.
- Frameless glass vs. framed. Frameless reads modern and costs more; a framed unit is a solid value. Go frameless if you’re doing a Kohler or similar high-end fixture package.
- Niche and bench. A built-in niche is $150 – $400 in tile and framing. A bench adds $400 – $1,100 depending on whether it’s tiled into the wall or a floating slab.
- Rain head vs. standard. A rain head runs a bit more plumbing in the ceiling, but it’s the single most-requested upgrade in the homes we see.
What Walk-In Showers & Shower Remodeling Costs in Stanton, CA
The lead range for a full walk-in shower remodel in Stanton is $9,000 – $28,000. A straight walk-in shower installation runs $4,500 – $12,000, a shower replacement (same footprint, new base and surround) runs $3,000 – $8,500, and a tub-to-shower conversion is $3,500 – $10,000. Where you land depends on these five variables:
- Footprint and tile area. A 4×4 shower and a 5×6 walk-in with a bench are different jobs; tile square footage drives the number.
- Existing condition. Rot around the drain or a cracked pan adds $500 – $2,000 in framing and subfloor repair.
- Plumbing and electrical moves. Relocating the drain or adding a ceiling rain head means licensed trade work; each move adds cost.
- Material grade. Porcelain vs. marble-look porcelain vs. natural stone is a $1,500 – $5,000 swing on the same job.
- Permit scope. A full remodel with plumbing relocation pulls a permit; a cosmetic replacement often doesn’t.
A written estimate from us lists every line item, the permit and inspection cost if it applies, and the exact tile and fixture spec. What usually isn’t included: structural repair if the subfloor is soft, and glass lead time longer than the standard two to three weeks.
See the difference
Before
After
Before
After
Before
AfterWhat Stanton’s Housing Stock Does to a Shower Build
Stanton’s housing stock is overwhelmingly 1950s – 60s single-story stucco tract homes on compact lots, and that changes this job in ways it doesn’t change a shower in a newer city. On these infill lots, a walk-in shower often sits against original block-wall property lines and a garage conversion next door, so we verify the footprint and framing before demo. Bathroom walls are usually furring over stucco or a shared wet wall with the tub, and the older mortar beds hide drain rot more often than newer construction. Because construction runs year-round in this coastal-influenced inland climate, we schedule tile work in any season. The heavy redevelopment along Beach Blvd and Katella Ave means many of our Stanton shower jobs are gut remodels or ADU additions where the new shower is one piece of a larger permit.
If the shower is part of a wider scope, most homeowners fold it into Bathroom Remodeling in Stanton. We cover all of Stanton, and many clients pair the shower work with Roof Replacement & Installation in Stanton or Metal Roofing in Stanton when the ADU or addition is in the same permit package. Our Bathroom Remodeling service covers the full vertical if you want to see the wider scope.
Serving Stanton, CA – Our Local Coverage Area
We serve Stanton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Stanton
Two to three weeks for a tile-and-membrane custom shower, and five to eight days for a straight acrylic replacement. Glass lead time is the usual bottleneck, so lock your enclosure choice by day four. Call (888) 578-4462 for a schedule walk-through on your Stanton address.
Yes, whenever the drain or valve is being relocated, and generally for a full bathroom remodel where plumbing and electrical move. A cosmetic shower replacement in the same footprint often doesn’t require one. We pull the permit and pass the rough-plumbing and waterproofing inspections for you.
Yes, in most cases. If your existing drain and valve are in a sensible spot, we keep them and build the new pan and walls around the same footprint, which saves $800 – $2,500 and a couple of days. A curbless or enlarged layout usually needs at least a drain move.
The lead range is $9,000 – $28,000 for a full remodel; a straight install is $4,500 – $12,000, and a replacement runs $3,000 – $8,500. Call (888) 578-4462 for an exact quote on your specific layout – estimates are free.
Every walk-in shower we build in Stanton is covered by our 730-Day Done Right Promise, which is the workmanship warranty on the waterproofing, tile, and installation. If something isn’t right, we come back and make it right. Schedule a free on-site estimate at (888) 578-4462.
Get a Free Estimate on Walk-In Showers & Shower Remodeling in Stanton
Walk-in showers and shower remodeling in Stanton start with a free on-site estimate, and that visit is where the real number gets set. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and we quote the whole job in writing so nothing changes once work starts. Call (888) 578-4462 for a free estimate.
Written by the team at Groundwork Construction Co.