Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWindow Replacement in Irvine, CA
Window replacement in Irvine typically runs $650 to $1,400 per opening for standard vinyl or fiberglass units, and $1,800 to $3,500 or more for larger wood-clad and custom aluminum systems. Most Irvine homes can be re-glazed in a single day, with the whole job wrapped up in one to three days depending on count and access. We handle the whole thing: measurement, permit research, product selection, installation, trim, and cleanup, backed by our 730-Day Done Right Promise so the work is covered in writing long after the last caulk line cures.
If you’re staring at fogged dual-pane glass, fighting a slider that won’t latch, or watching your summer SDG&E bill climb because the west-facing windows are basically radiators, call us at (888) 578-4462. A live person answers, day or night, and we’ll set up a free estimate and design consult. This page sits under our broader Windows & Doors service, where we cover entry doors, patio sliders, and the trim packages that tie a whole exterior together.
Here’s what makes us different from the pickup-truck-and-a-handshake crew: we work exclusively with verified manufacturers like Andersen and Marvin, we show you real numbers up front, and if something’s off after we leave, the 730-Day Done Right Promise means we come back and make it right. No fine print, no “call the manufacturer.”
Key Takeaways
- Window replacement in Irvine commonly lands between $650 and $1,400 per window for standard sizes, more for custom and wood-clad.
- Most single-window jobs finish in one day; whole-home replacements typically take one to three days.
- Irvine’s inland heat and coastal-marine air mix causes different wear patterns than you’d see in Los Angeles, which affects seal failure and frame rot.
- Our technicians bring up to 12 years of experience, arrive background-checked and in uniform, and every job carries the 730-Day Done Right Promise.
- Financing at 0% for 18 months and $1,000 off projects over $10,000 make a full-home replacement easier to budget.
When You Need Window Replacement
Windows don’t fail all at once. They fail in small, annoying ways that a lot of Irvine homeowners ignore for years, and then one day the glass is cloudy or the frame has gone soft and the choice is made for them. Here are the situations we see most often in Irvine and the surrounding neighborhoods.
- Foggy or cloudy dual-pane glass. If you can’t see clearly through a window, the seal between the panes has failed and moisture has moved in. Once that happens, the insulating gas is gone and the window is no longer doing its job. This is the single most common call we get from Irvine Ranch and Woodbridge homeowners, and it’s almost always worth replacing rather than re-glazing on older aluminum frames.
- Drafts you can feel along the edges. Run a hand around the frame on a cool morning. If you feel a steady stream, the weatherstripping, frame, or sash alignment is compromised. On Irvine homes built in the 1970s and 80s, we often find the original aluminum sliders have lost their seals and no longer sit flush.
- Water stains or soft wood on interior trim. A dark streak under a window or trim that gives when you press it means water is getting behind the frame. Left long enough, it reaches the wall cavity. This is the repair that gets expensive fast, so a window replacement now is cheaper than a stucco-and-framing repair later.
- Sticking, hard-to-open, or jammed windows. Irvine’s temperature swings cause frames to expand and contract. Aluminum and older wood frames can warp over time, making windows stick or refuse to latch. A window that won’t close fully is also a safety concern, especially on second-story bedrooms.
- Visible cracks, chips, or impact damage. A cracked pane is a security risk and a heat loss point. We replace single panes when the frame is sound and a full unit when it isn’t.
- Energy bills that keep climbing. If you’re running the AC harder every summer and your home has original single-pane or early dual-pane windows, the glass is a big part of the problem. Irvine’s inland neighborhoods bake in the afternoon sun, and older glass does little to stop the heat gain.
If any of these ring a bell, don’t wait for the frame to rot before you call. A quick visit tells you whether you’re looking at a repair or a replacement. Our team answers the phone around the clock, so you can call when the thought hits you at 10 p.m. and still talk to a real person.
Our Window Replacement Process
We keep the process simple and predictable. You get a clear scope, a fixed number, and a crew that shows up on time and cleans up when they’re done. Here’s what to expect from the first call to the final walkthrough.
- Free estimate and design consult. We come to your Irvine home, measure every opening, look at the existing frames, and talk through your goals. We’ll walk you through options from Andersen and Marvin, discuss glass packages, frame materials, and color, and give you an upfront price. The number you see is the number you pay, and it comes with no-hassle upfront pricing, no surprise line items.
- Permit and HOA check. Irvine has specific requirements for exterior changes, and many HOAs in communities like Northwood and Turtle Rock have their own color and style approvals. We research what your project needs, help with the paperwork, and make sure the replacement clears the rules before anyone touches a frame. Skipping this step is how homeowners end up with a stop-work order and a repaint bill.
- Product order and scheduling. Once you’ve approved the scope, we order the units and lock in an install date. Custom sizes and wood-clad products take longer than standard vinyl, so we’ll give you a realistic timeline, not an optimistic one.
- Installation day. Our background-checked, uniformed technicians arrive with everything needed to do the job in one visit for most standard replacements. We protect floors and furniture, remove the old units, install the new ones, seal and insulate the rough openings, and reinstall interior and exterior trim. Full-home jobs usually run one to three days.
- Sealing, flashing, and finish work. The details are what make a window last. We flash and seal exterior openings correctly so Irvine’s occasional rain doesn’t find its way behind the frame, and we finish the trim so the new windows look like they were always part of the house.
- Final walkthrough and cleanup. We walk the job with you, test every window, and haul away all debris. If anything needs adjusting, we handle it before we leave. And if a problem turns up later, the 730-Day Done Right Promise covers the work.
What Affects Window Replacement Cost in Irvine
Two homes on the same street can have wildly different window replacement numbers, and it’s not because one contractor is gouging. Here’s what actually moves the price in Irvine.
- Window count and size. The single biggest factor. A standard 3-by-5-foot double-hung costs less than a large picture window or a wide slider.
- Frame material. Vinyl is the most budget-friendly. Fiberglass sits in the middle. Wood-clad aluminum, like the higher-end Andersen and Marvin lines, costs more but holds up beautifully and adds real resale value in Irvine’s market.
- Glass package. Standard dual-pane versus Low-E, argon-filled, or triple-pane options. If your west-facing windows take a beating from the afternoon sun, upgraded glass pays for itself in comfort and energy savings.
- Second-story or difficult access. Windows on upper floors, above a roof line, or behind landscaping take more time and sometimes scaffolding.
- Trim and finish. Interior trim and exterior stucco or siding integration vary by home. Historic styles and custom trim work add cost.
- Permits and HOA approvals. Irvine projects sometimes require permits, and we factor that into the estimate so there are no surprises.
Window Replacement Pricing in Irvine
We don’t hide behind “call for pricing.” Here are honest ranges so you can budget before anyone knocks on your door. These are typical Irvine numbers, not national averages, and your actual quote depends on the factors above. Every estimate is free, and the number you see is the number you pay.
| Window Type | Typical Installed Range (per window) |
|---|---|
| Standard vinyl double-hung or slider | $650 – $1,100 |
| Fiberglass, standard size | $900 – $1,500 |
| Wood-clad (Andersen, Marvin), standard size | $1,400 – $2,400 |
| Large picture or custom-size window | $1,800 – $3,500+ |
| Whole-home replacement (12 – 16 windows, mid-range) | $10,000 – $22,000 |
A few budget helpers to keep in mind. We offer 0% financing for 18 months, which makes a whole-home job spread across comfortable monthly payments instead of one big hit. Projects over $10,000 also get $1,000 off. And every estimate includes a free design consult, so you’re not paying to figure out what you want.
If you’re weighing window replacement against other exterior projects, our Irvine service area page covers the trades we handle across the city, and you can see how window work compares to a roof or paint job on the same budget. It’s often smarter to bundle exterior work so scaffolding and staging costs are shared.
Why Irvine Windows Fail Differently Than You’d Expect
Irvine sits in a pocket that gets the worst of both worlds: hot, dry inland afternoons and cool, damp marine air rolling in off the coast at night. That daily expansion and contraction is hard on window frames and seals. In neighborhoods like Woodbridge and Westpark, we regularly see dual-pane seal failures on windows facing west or south, where the afternoon sun drives the temperature inside the glass past what the sealant can handle year after year. Homes near the coast side of town tend to see more corrosion and moisture-related trim rot instead.
Older Irvine homes built in the 1970s and 80s often still have their original aluminum sliders. Those units were good for their time, but the thermal breaks and seals have typically given out by now. We also run into stucco exteriors that need careful integration when a window is replaced, and getting the flashing right on stucco is where a lot of quick crews cut corners. We don’t.
Because we work with premium manufacturers, including lines from Andersen and Marvin, and draw on partners like CertainTeed and Owens Corning for the exterior materials around the window, we can match the right product to what your Irvine home actually needs instead of whatever’s on sale at the supply house.
Should You Repair or Replace Your Windows?
A single broken pane or a worn-out sash on an otherwise sound window is a repair, and we’ll tell you so. But once the frame is warped, the seal has failed across multiple windows, or the trim is soft from water intrusion, replacement is usually the better spend. Patching a failing aluminum frame over and over adds up to more than a new window in just a few years, and you never get the energy performance back. We’ll give you a straight answer during the estimate, even when the answer is “you don’t need us yet.”
FAQs – Window Replacement
How much does window replacement cost in Irvine?
Window replacement in Irvine typically costs $650 to $1,400 per window for standard sizes, and $1,800 to $3,500 or more for large or custom wood-clad units. A mid-range whole-home job runs about $10,000 to $22,000. Call (888) 578-4462 for an exact quote. Estimates are free and upfront, with no-hassle pricing and no surprise line items.
Can you replace windows in a single day?
Yes. Most single-window and small-count replacements are completed in one visit by our background-checked, uniformed technicians. Whole-home jobs usually take one to three days depending on the number of windows, access, and trim work. We’ll give you a realistic timeline at the estimate so you can plan around it.
Do I need a permit to replace windows in Irvine?
Often yes, and requirements depend on the scope and whether you’re changing the size or structure of the opening. Irvine also has HOA rules in many communities that govern exterior color and style. We research what your specific project needs, help with the paperwork, and make sure the work clears approvals before we start. Call (888) 578-4462 and we’ll walk you through what applies to your home.
What is the 730-Day Done Right Promise?
The 730-Day Done Right Promise means if our window work isn’t done right, we make it right, for two full years after installation. It’s one of the longest workmanship guarantees in residential construction, and it’s backed in writing. If a window doesn’t sit, seal, or operate the way it should, we come back and fix it, period. Call (888) 578-4462 to schedule your free estimate.
Contact Us for Your Free Window Replacement Estimate
Replacing windows is one of those projects that pays you back every month in comfort and lower bills, and it’s worth doing with a contractor who stands behind the work. We answer calls with a live person 24 hours a day, seven days a week, so reach out whenever it’s convenient. Call (888) 578-4462 for your free estimate and design consult. We’ll measure, walk you through your options from brands like Andersen and Marvin, and give you a clear number with no games. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available to make the budget work. From the first call to the final walkthrough, we’ve got you, and it’s all backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine.