Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Irvine: What It Takes and What It Costs
A tub-to-shower conversion in Irvine runs $3,500 to $10,000 and takes about five to ten working days from demo to final inspection, depending on whether the drain moves and how much of the wall tile gets replaced. In most Irvine condos and tract homes we’re converting a 30- to 50-year-old alcove tub to a walk-in shower with a new waterproofing system, a tiled or solid-surface surround, and a code-compliant drain and valve. Call (888) 578-4462 and we’ll price your exact bathroom.
How the job actually runs, stage by stage
This isn’t a swap-a-tub-for-a-pan project. A proper conversion touches the drain, the valve, the waterproofing, and the finish, in a fixed order, and each stage has a decision the homeowner makes before the next crew step.
- Stage 1 – Site protection and demo (1 day). We cover floors and adjacent rooms, shut the water, pull the old tub, surround, and trim, and expose the drain and valve. You decide before this day whether the tub goes to a neighbor or the dumpster; crews here charge for haul-away either way, so plan the pickup.
- Stage 2 – Rough-in and inspection (1-2 days). The plumber relocates or replaces the drain and sets the new pressure-balancing valve, and the electrician handles any lighting or exhaust changes if your bathroom needs a larger fan. If the drain has to move more than a foot, this is where the cost climbs. We call for rough plumbing inspection here, and the city’s inspector must sign off before walls close.
- Stage 3 – Substrate and waterproofing (2 days). Cement board or a foam board system goes up, joints get taped and sealed, and a liquid or sheet membrane covers the pan, curbs, and walls. You choose the shower pan style: tiled mud-job base, a pre-sloped acrylic or composite pan, or a low-profile linear-drain design. Waterproofing cures before tile, no exceptions, and this is the stage that separates a 20-year shower from a 5-year one.
- Stage 4 – Tile, finish, and glass (2-4 days). Wall tile, grout, then the enclosure. You choose tile size and edge profile, the shower valve trim (Grohe and Kohler are both common picks), and whether the opening gets a frameless tempered glass panel, a framed door, or a curtain rod (the cheapest route). Tile setting and glass template add real days here, especially on large-format 24×48 porcelain, which fights a curb-less or linear drain install.
- Stage 5 – Final inspection and punch list (1 day). The city signs off on the final plumbing and electrical, we test the valve and drain, and we walk the shower with you. Anything that fails the walkthrough is on us to fix; that’s what the 730-Day Done Right Promise covers.
What the homeowner has to decide, and when: drain location and pan type before Stage 2, valve and tile selections before Stage 3, glass and door configuration before Stage 4. Decisions made on schedule keep the job on a five-day clock. A late tile choice can stretch any Irvine conversion into a second week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll pick between (and what each one really costs you)
Almost every conversion decision trades money against how long the shower survives. Here’s the honest version.
- Shower pan and base: A pre-sloped acrylic or composite pan is the fastest and cheapest base, and it’s fine in a small space. A tiled mud-set or foam base looks better and lasts decades, but adds labor and a waterproofing step. A linear-drain curb-less base is the premium option and the one that most affects total cost.
- Wallcovering: Porcelain tile is the default, and it holds up to Irvine’s dry heat and heavy daily use. Large-format tile means fewer grout lines to scrub but needs a very flat substrate. A solid-surface or acrylic surround installs in a day and cleans easily, but it looks and ages like the budget option it is.
- Valve and trim: A pressure-balancing valve is required by code and standard now. A thermostatic valve adds control and cost. Grohe and Kohler trim lines are widely stocked and easy to service years later; an off-brand valve can make you hunt for replacement cartridges.
- Glass and door: A frameless tempered panel is the most expensive and the most requested. A framed pivot or bypass door costs less and holds up. A curtain is the cheapest, and in a tight guest bath, sometimes the right call.
- Waterproofing system: A bonded sheet or liquid membrane over cement board is the standard for a long-life shower. Moisture-resistant drywall alone is not; if a bid doesn’t name the waterproofing method, that’s your first question to ask.
For a full-scope bathroom project that includes flooring, vanity, and lighting beyond the shower, our Bathroom Remodeling in Irvine page covers that wider work.
What Tub-to-Shower Conversion costs in Irvine, CA
Plan on $3,500 to $10,000 for a conversion. Most Irvine jobs land in the $4,500 to $7,500 range when the drain stays put, the wall tile is a standard porcelain, and the glass is a framed door or a single fixed panel.
What pushes a job to the low end: a straightforward alcove tub, no drain relocation, a composite pan and surround, an acrylic or framed enclosure, and tile at a mid-grade porcelain.
What pushes it to the high end: moving the drain or relocating a wall, converting a tub that sits under a window or beside a load-bearing partition, a curb-less linear-drain base, large-format tile, a frameless glass enclosure, and a thermostatic Grohe or Kohler valve. Under-cabinet or ceiling exhaust upgrades and any unseen rot behind the old tub add cost too, and we flag those the day we open the wall.
Every written estimate is line-itemed: demo, haul-away, plumbing rough-in, valve and trim, waterproofing, tile and setting material, glass and hardware, permits and inspection, and finish work. Not included: a full re-tile of the bathroom floor or walls beyond the shower, vanity and cabinet replacement, or any structural repair we can’t see until demo. Get the number in writing; the number you see is the number you pay. Call (888) 578-4462 for a free on-site estimate, and we’ll confirm what your bathroom actually needs.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine homes specifically do to a tub-to-shower conversion
Irvine was built almost entirely by the Irvine Company from the 1960s forward, which means most of the homes we convert bathrooms in sit inside a village-specific HOA with its own design-review board, not just a city permit counter. That matters in a specific way here. In Woodbridge and Northwood, the 30- to 50-year-old tract homes and townhomes often have a tub alcove tucked against a shared wall or a window, and any change to the exterior envelope or exhaust vent needs association sign-off before the city will look at your plans. The city’s building division also runs a tight plan check, one that neighboring Tustin and Santa Ana never impose, and the HOA design review can add a week or two to the front of the schedule if you skip it.
The housing stock is post-1965 Mediterranean and Spanish-revival stucco, so the bathroom sits in a compact, dry-climate footprint: no freeze, hot summers, and a lot of homes where the original tub surround was set over a substrate that has aged. We pull the permit, coordinate the inspection, and hand the HOA the design submittal so the conversion doesn’t stall at either gate. It’s the same building envelope logic that shows up on a Metal Roofing in Irvine job, where plan check and material durability matter just as much.
We serve the whole city through our Irvine coverage, from Turtle Rock to the Spectrum and UCI corridor, and our Bathroom Remodeling hub covers the full range of work we do in bathrooms. Some homeowners pair this with exterior work once the interior is dialed in, and Tile Roofing in Irvine is a common follow-on when the same home needs its roof looked at.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Tub-to-Shower Conversion in Irvine
Plan on five to ten working days, and add a week or two for HOA design review and city plan check if your village requires it. Demo and rough-in happen early; tile, glass, and final inspection fill the back half. Call (888) 578-4462 for a firm timeline based on your bathroom.
Yes. A conversion touches the plumbing drain and valve and typically the electrical, and Irvine’s building division requires a permit and inspection for both. We pull the permit and schedule the inspections for you, so the final sign-off is documented. Call (888) 578-4462 and we’ll walk through what your specific job needs.
In most cases, yes. If the drain stays within about a foot of its current spot and no wall moves, the job is simpler and lands on the lower end of the $3,500 to $10,000 range. Moving the drain or a wall raises both cost and timeline.
It runs $3,500 to $10,000, with most Irvine jobs settling around $4,500 to $7,500. Drain relocation, tile grade, glass style, and valve choice move the number. Call (888) 578-4462 for an exact quote; estimates are free.
The full job is backed by our 730-Day Done Right Promise: if anything we installed isn’t right, we make it right, not just for a few months but for two years. That covers workmanship on the waterproofing, tile, and plumbing installation.
Get your free tub-to-shower conversion estimate in Irvine
We’ll come to your Irvine home, measure the alcove, look at the drain and valve situation, and hand you a written line-item estimate with the permit and inspection included. No vague numbers, no change orders once work starts. Call (888) 578-4462 today and we’ll answer live, day or night, and get your estimate scheduled.
Written by the team at Groundwork Construction Co.